Artikelnummer: ST10000VE001
| General Specifications | |
|---|---|
| Product Family | Seagate SkyHawk AI |
| Model | ST10000VE001 |
| Formatted Capacity | 10 TB |
| Guaranteed Sectors | 19,532,873,728 |
| Interface | Serial ATA (SATA) – Serial ATA Revision 3.3 |
| Form Factor | 3.5 in (SFF-8301 / SFF-8323) |
| Bytes per Logical Sector | 512 bytes |
| Bytes per Physical Sector | 4096 bytes (512E) |
| Discs | 5 |
| Heads | 10 |
| Recording Method | Perpendicular |
| Regulatory Model Number | STL018 |
| Performance | |
| Spindle Speed | 7200 RPM (± 0.2%) |
| Cache Buffer | 256 MB (262,144 KB) |
| Sustained Data Transfer Rate (OD, max.) | 234 MiB/s (245 MB/s max.) |
| Internal Data Transfer Rate (max.) | 2169 Mb/s |
| I/O Data-Transfer Rate (max.) | 600 MB/s (Ultra DMA mode 5) |
| Average Latency | 4.16 ms |
| Supported ATA Data-Transfer Modes | PIO modes 0-4; Multiword DMA modes 0-2; Ultra DMA modes 0-6 |
| Recording Density (max.) | 2499 Kb/in |
| Track Density | 487 ktracks/in |
| Areal Density | 1215 Gb/in² |
| Power-on to Ready (typ./max.) | 23/30 s |
| Standby to Ready (typ./max.) | 23/30 s |
| Ready to Spindle Stop (max.) | 20 s |
| Power | |
| Power Supply | +5 V / +12 V (SATA power connector) |
| Voltage Tolerance (including noise) | 5 V ±5%; 12 V ±10% |
| Startup Current (12 V, peak) | 2.0 A |
| Average Operating Power (25°C) | 10.09 W (5 V: 0.542 A; 12 V: 0.6144 A) |
| Average Idle Power (Idle1) | 7.76 W (5 V: 0.325 A; 12 V: 0.512 A) |
| Power Management | PowerChoice™ (EPC) – Idle_a: 100 ms; Idle_b: 2 min; Idle_c: 4 min; Standby_z: 15 min |
| Environmental Limits | |
| Operating Temperature | 0°C ambient to 65°C drive reported (32°F to 149°F) |
| Non-Operating (Storage) Temperature | -40°C to 70°C (-40°F to 158°F, packaged) |
| Max. Temperature Gradient | 20°C per hour |
| Relative Humidity (operating / non-operating) | 5% to 95% (non-condensing) |
| Max. Humidity Gradient | 20% per hour |
| Altitude, Operating | -304.8 m to 3048 m (-1000 ft to 10,000+ ft) |
| Altitude, Non-Operating | -304.8 m to 12,192 m (-1000 ft to 40,000+ ft) |
| Operating Shock (max. 2 ms) | Read 70 Gs / Write 40 Gs |
| Non-Operating Shock (max. 2 ms) | 300 Gs |
| Linear Random Operating Vibration | 10-500 Hz: 1.04 Grms |
| Random Rotary Operating Vibration | 20-1500 Hz: 12.5 rad/s² |
| Linear Random Non-Operating Vibration | 10-500 Hz: 2.0 Grms |
| Acoustics (Sound Power, ISO 7779) | |
| Idle | 2.8 bels (typ.) / 3.0 bels (max.) |
| Performance Seek | 3.2 bels (typ.) / 3.4 bels (max.) |
| Reliability | |
| MTBF | 2,000,000 hours |
| Annualized Failure Rate (AFR) | 0.44% (based on 8760 power-on hours per year) |
| Maximum Rated Workload | <550 TB/year |
| Nonrecoverable Read Errors | 1 sector per 10¹⁵ bits read, max. |
| Load/Unload Cycles | 300,000 cycles |
| Service Life | 5 years |
| Hot-Plug Support | Yes (Serial ATA Revision 3.3) |
| Preventive Maintenance | None required |
| Physical Specifications | |
| Weight (max.) | 720 g (1.587 lb) |
| Height (max.) | 26.10 mm (1.028 in) |
| Length (max.) | 147.00 mm (5.787 in) |
| Mounting Screws | 6-32 UNC (max. torque 6 in-lb) |
| Mounting Orientation | Any orientation |
| Key Features | |
| Native Command Queuing (NCQ) | Yes |
| S.M.A.R.T. Monitoring and Reporting | Yes |
| PowerChoice™ Power Savings | Yes |
| SeaTools™ Diagnostic Software | Supported |
| Worldwide Name (WWN) | Yes |
| Tarnish-Resistant Components | Yes |
| Latching SATA Cable/Connector Support | Yes |
| Corrosive Environment Resistance | ASTM B845 classes G and H (accelerated corrosion testing) |
