4 x Simplex Contact Closure to Fiber Optic MM/SM Simplex FC

• Dry contact termination or ability to carry TTL data over a single fiber
• 2 km distance support with Multi-mode Fiber
• 20 km distance support with Single-mode Fiber
• Ability to view instant traffic with LED indicators
• No EMI, RFI, or ground loop effects
• CWDM support
• Standalone and rack-mount installation support
• Constant optical power input and amplitude dynamic range; no electrical or optical adjustments required
• Special ASIC design
• Industrial operating temperature -10°C to 75°C
• Hot-swap function
• Can be used standalone or with a rack-mount UPTECH-VOF-2U/4U chassis
• Contact closure 4x Simplex (used only in the Tx to Rx direction)

Contact Closure Specifications

• Connector: 2x Terminal Block (5 pins 3.5mm)
• Signal support: TTL / Dry Contact / ON/OFF signal
• Voltage: 24VAC / 200mA
• NO or NC: Normally Open

Fiber-Optic Specifications

• F/O Connector: Simplex FC
• Transmitter: Tx Power: -15 ~ -8dBm
• Receiver: Sensitivity: ≤-35dBm
• Transmission Distance: 2KM (Multimode / 1 fiber) - 20KM (Singlemode / 1 fiber)
• Operating Wavelength: 1310nm
• Dimensions: 102(L)×108(W)×27(H) mm
• Operating Voltage: DC5V (included in the box)
• Operating Temperature: -10°C to +75°C
• Storage Temperature: -55°C to +85°C
• Operating Humidity: 0 to 95% non-condensing
• MTBF: ≥ 100,000 hours