+90 212 222 87 80 nokta@noktaelektronik.net

B2B-Login Technischer Service

Inno Instrument

Active V-Groove Fusion Splicer

Name: Active V-Groove Fusion Splicer
Brand: Inno Instrument
SKU: View3

Artikelnummer: View3

Splices fiber ends on the FTTx site with active V-groove alignment.

An arc fusion splicer built for FTTx installations. A 5.0 inch touch screen and three LED lamps make work in dark environments easier.

Active claddingAlignment mode

0.03 dBTypical splice loss (SM)

7 secSplice time (quick mode)

5.0 inchTouch screen

3500 arcsElectrode life

4200 mAhBattery capacity

Key features

0.03dB

Typical splice loss on SM fiber

Loss runs 0.02 dB on MM fiber, measured to the ITU-T standard.

800x480pixels

Screen resolution

The 5.0 inch touch screen shows the fiber across a wide viewing angle.

520X

Magnification

A double tap zooms to 520X and shows the fiber surface in detail.

3units

LED work light

Three LEDs light the fiber holders and the splice point.

170times

Splice and heat cycles per charge

The 4200 mAh battery covers a long shift.

2000results

Splice log

Keeps the most recent splice results in device memory.

DAILY FIELD USE

SOC compatibilityA removable connector holder and heater oven handle SOC connectors.

Ceramic clampA ceramic clamp holds the stripped fiber without scratching its surface.

Electrode coverElectrodes come out and go back in without extra tools.

Model
Dimensions	143H x 130W x 155D mm (without rubber bumper) / 152H x 147W x 175D mm (with rubber bumper)
Weight	2.31KG (with battery) / 1.95KG (without battery)
Fiber Count	Single
Applicable Fiber	SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)
Compatible Fiber Cable	0.25~3.0 mm / Indoor Cable
Cleaved Length	Diameter: 0.125~1 mm / Cleave Length: 8~16 mm
Cladding Diameter	80~150 µm
Splicing Mode	Max 128 modes
Heating Mode	5 pre-set modes / Max 32 modes
Typical Splice Loss	SM: 0.03dB / MM: 0.02dB / DS: 0.05dB / NZDS: 0.05dB / G.657: 0.03dB (ITU-T Standard)
Return Loss	>>60dB
Illumination	3 White LEDs
Splicing Time	Quick Mode: 7 sec / Auto mode: 9 sec
Estimated Splice Loss	Available
Heating Length	20~60 mm
Heating Time	FP-03 typical heating time: 30 seconds
Storage of Results	2000 results
Tensile Test	1.96~2.25N
Operating Conditions	Operating Altitude: 0~5000m above sea level, 0~95% relative humidity, -10~50°C, Max. Wind 15m/s
Storage Conditions	0~95% relative humidity, -40~80°C
Display	90° bi-directional view, 5.0" Color High Resolution Screen
Fiber View and Magnification	X, Y, XY, X/Y : 520X Magnification
Power Supply	AC Input 100-240V, DC Input 9-14V
Splicing Count and Heating with Battery	4200mAh Battery Capacity, Typical 170 times (Splice+Heat)
Operation Methods	Button / Touch Screen
Auto Calibration	Automatic arc calibration according to air pressure and temperature
Electrode Life	3500 arcs, can be extended using an electrode grinder
Terminal	USB2.0 / MINI USB

Datasheet

View3

pdf3/30/2023

Sertifika

CE Belgesi

pdf12/5/2019