Name: BNC Panel Mount Chassis Connector
Brand: Amphenol
SKU: AC-BNC-JJ-75

Runs the coaxial line straight through the panel

A panel-mount feed-through connector with a BNC female interface at both ends. It carries the line to the far side of rack, enclosure and cabinet panels without breaking it; the diecast zinc alloy housing carries a satin nickel finish.

75 Ωimpedance

DC – 3 GHzfrequency range

Female – FemaleBNC interface

Ø24.0 mmpanel cut-out diameter

Satin nickelshell finish

1000mating cycles

Key features

75Ω

Impedance matched to broadcast lines

It fits the 75 Ω layout used on radio, TV and HD video lines.

3GHz

Wide operating band

The frequency range extends from DC to 3 GHz and carries serial digital and HD video signals.

1000cycles

Long mating life

The mating cycle life is 1000, so it keeps serving on panels where connectors come and go often.

Ø24.0mm

Ready panel cut-out

The panel hole is Ø24.0 mm, with two Ø3.4 mm mounting holes on a 24.0 mm × 19.0 mm spacing.

1/2-28UNEF

Bushing clamped by a nut

A hex nut and lock washer fasten the 1/2-28UNEF-2A threaded bushing to the panel.

Everyday use on the panel

Service without cutting the cableUnplugging the front cable is enough; the line behind the panel stays in place.

Tidy rear of the panelThe line terminates at the panel, so cables do not wander inside the enclosure.

Mounting hardware in the boxThe nut and washer come with the product, so there are no extra parts to hunt for.

Usage areasBroadcast·High-bandwidth video equipment·D1/D2 serial digital·Graphics workstations·Telephone and workstations

It complies with RoHS under EU 2002/95/EC. The matt black finish option appears under code AC-BNC-JJ-75B.

General Specifications

Product Type

BNC Jack-Jack Receptacle (panel / chassis mount)

Part Number

AC-BNC-JJ-75

Series

AC Series

Comparable Part No.

NBB75DFI

Electrical Specifications

Impedance

75 Ω

Frequency Range

DC – 3 GHz

Mechanical Specifications

Housing Material

Diecast Zinc Alloy

Shell Finish

Satin Nickel

Mating Cycle Durability

1000

Flange Dimensions

31.1 mm × 26.1 mm

Bushing Thread

1/2-28UNEF-2A

Mounting Hardware

Hex nut (1 pc) and lock washer (1 pc)

Mounting Details

Panel Cut-out Diameter

Ø24.0 mm [Ø0.94 in]

Mounting Holes

Ø3.4 mm [Ø0.13 in] – 2 places

Hole Spacing (Vertical)

24.0 mm [0.94 in]

Hole Spacing (Horizontal)

19.0 mm [0.75 in]

Compliance and Variants

RoHS

Compliant (EU 2002/95/EC)

Alternative Finish Option

AC-BNC-JJ-75B (Matt Black)