4.3 inch LCD with 800 x 480 resolution
2 MP HD dual lens camera
White light illuminators to help recognize targets in dark or low light environments
Supports 40000 users
Supports 20000 faces
Supports 20000 cards
Recognizes faces from 0.3 m to 1.5 m distance
Face recognition accuracy up to 99.9 percent
Compares 1 face with N faces at a speed of 0.2 seconds per person
Liveness detection to prevent spoof attempts using photos or videos
Supports duress alarm
Supports tamper alarm
Supports emergency alarm
Supports door detector alarms
Supports leaving audio and video messages through the indoor monitor SD card in VTH is required
Supports password unlock
Supports IC card unlock
Supports QR code unlock supported by DSS
Supports face unlock
Supports remote unlock
Unlocks the door through the indoor monitor
Unlocks the door through the management center
Unlocks the door through the mobile app
Provides 12 VDC 500 mA power for the extension module or card reader locks require an extra power supply
IP65 rated silicone sealant is required for the shell see the quick start guide
Standard PoE power supply
If the VTO device with 12 V power output needs to charge the load it should be connected to a PSE switch that complies with the 802.3.at standard
