Runs a Compact Flash card as a 2.5-inch SATA hard drive.
The converter presents Compact Flash (CF I/II) and Micro Drive cards as a standard 2.5-inch SATA hard drive. It seats directly in the 2.5-inch SATA connector of a laptop, and the operating system recognizes the card without a driver.
Card instead of a drivePresents a Compact Flash (CF I/II) or Micro Drive card as a standard 2.5-inch SATA hard drive.
Direct connectionSeats directly in the 2.5-inch SATA connector of a laptop and supports Port Multiplier and hardware Port Multiplier.
Boot supportSets the CF card as the primary boot disk and starts the system from the operating system on that card.
No driver neededThe operating system recognizes the card on its own and needs no separate driver.
Transfer modesSupports DMA and Ultra DMA modes; these modes run only with flash media that carries the same feature.
Operating system supportWorks with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Windows 7, Mac and Linux.
