Interface
Copper Port	10/100/1000BASE-T Ethernet TP interface Auto-negotiation, auto MDI/MDI-X with PoE injector function
Fiber Port	GTP-802/GTP-802S: 1000BASE-X GTP-805A: 100/1000BASE-X SFP
Fiber Mode	GTP-802 　Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber GTP-802S 　Single-mode: 9/125 ㎛ optic fiber GTP-805A 　May vary on SFP Module
Fiber Port Type (connector)	GTP-802: SC GTP-802S: SC GTP-805A: SFP
Cable Distance	GTP-802: 220m & 550m GTP-802S: 10km GTP-805A: May vary on SFP Module
Optical Frequency	GTP-802: 850nm GTP-802S: 1310nm GTP-805A: May vary on SFP Module
Launch Power (dBm)	GTP-802: Max. -4 / Min. -9.5 GTP-802S: Max. -3 / Min. -9.5 GTP-805A: May vary on SFP Module
Receive Sensitivity	GTP-802: -13.5 GTP-802S: -14.4 GTP-805A: May vary on SFP Module
Maximum Input Power	GTP-802: -18 GTP-802S: -20 GTP-805A: May vary on SFP Module
Power Over Ethernet
PoE Output	IEEE 802.3at Power over Ethernet Plus standard IEEE 802.3af Power over Ethernet standard
Power Output	PoE 52V DC, max. 30 watts
PoE Power Supply Type	End-span
Power Pin Assignment	1/2 (+), 3/6 (-)
PoE Power Budget	30 watts
Hardware Specifications
Switch Architecture	Store-and-Forward
Flow Control	Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size	9K
LED	System: PWR (Green) Fiber 100/1000BASE-X: LNK/ACT (Green, GTP-805A) Fiber 1000BASE-X: LNK/ACT (Green, GTP-802/GTP-802S) TP 10/100/1000BASE-T: LNK/ACT (Green) PoE: Power-in-use (Orange)
Dimensions (W × D × H)	96 × 26 × 70 mm
Weight	0.21kg
Power Supply	52V DC, 0.58A external AC-to-DC adapter
LFP mode	Enable: Shut down either TP port or fiber port that is broken Disable: Link LED indicators still on if connection of the other end is broken
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Protocols and Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus standard
Protocols and Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus standard
Cables	TP: Cat 5 / 5e / 6 UTP cable Fiber: Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber Single-mode: 9/125 ㎛ optic fiber
Environment
Temperature	0~50 degrees C
Humidity	5~90% (non-condensing)

Converts a fiber link to a copper network and carries 802.3at PoE+ power to the connected device.

A media converter between 100/1000BASE-X fiber and 10/100/1000BASE-T copper with a built-in PoE injector. The fiber side extends network reach while the copper side sends data and power to the powered device over one cable.

10/100/1000BASE-TPoE output port

100/1000BASE-XFiber uplink port

30 wattsPoE power per port

52V DCPower requirement

0 ~ 50 °COperating Temperature

Key features

30watts

802.3at PoE+ output

The copper port powers 802.3af and 802.3at devices over 52V DC.

100m

Copper-side reach

The maximum distance between the PoE source and the powered device is 100 meters over Cat 5/5e/6 cable.

Jumbo frame support

Passes large packets through without fragmenting them.

0.58A

External adapter supply

The 52V DC adapter powers both the unit and the PoE output.

96 x 26 x 70mm

Compact metal housing

The 0.21-kilogram case takes little desk space.

EVERYDAY USE

Power where no outlet existsPowers the camera and the access point from the Ethernet cable where no power outlet exists.

LFP fault pass-throughWhen on, it shuts the port on the failing side and announces the fault to the far end.

Store-and-forward switchingIt buffers and forwards packets and reduces packet loss with IEEE 802.3x flow control.

ApplicationsSurveillance camera installations·Station and roadside locations·Campus and airport networks·Devices fed through a PoE splitter

Fiber distance and connector type vary by model within the series; the SFP-slot model depends on the installed module.

Interface

Copper Port

10/100/1000BASE-T Ethernet TP interface
Auto-negotiation, auto MDI/MDI-X with PoE injector function

Fiber Port

GTP-802/GTP-802S: 1000BASE-X
GTP-805A: 100/1000BASE-X SFP

Fiber Mode

GTP-802
　Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber
GTP-802S
　Single-mode: 9/125 ㎛ optic fiber
GTP-805A
　May vary on SFP Module

Fiber Port Type (connector)

GTP-802: SC
GTP-802S: SC
GTP-805A: SFP

Cable Distance

GTP-802: 220m & 550m
GTP-802S: 10km
GTP-805A: May vary on SFP Module

Optical Frequency

GTP-802: 850nm
GTP-802S: 1310nm
GTP-805A: May vary on SFP Module

Launch Power (dBm)

GTP-802: Max. -4 / Min. -9.5
GTP-802S: Max. -3 / Min. -9.5
GTP-805A: May vary on SFP Module

Receive Sensitivity

GTP-802: -13.5
GTP-802S: -14.4
GTP-805A: May vary on SFP Module

Maximum Input Power

GTP-802: -18
GTP-802S: -20
GTP-805A: May vary on SFP Module

Power Over Ethernet

PoE Output

IEEE 802.3at Power over Ethernet Plus standard
IEEE 802.3af Power over Ethernet standard

Power Output

PoE 52V DC, max. 30 watts

PoE Power Supply Type

End-span

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Budget

30 watts

Hardware Specifications

Switch Architecture

Store-and-Forward

Flow Control

Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode

Maximum Frame Size

LED

System: PWR (Green)
Fiber 100/1000BASE-X: LNK/ACT (Green, GTP-805A)
Fiber 1000BASE-X: LNK/ACT (Green, GTP-802/GTP-802S)
TP 10/100/1000BASE-T: LNK/ACT (Green)
PoE: Power-in-use (Orange)

Dimensions (W × D × H)

96 × 26 × 70 mm

Weight

0.21kg

Power Supply

52V DC, 0.58A external AC-to-DC adapter

LFP mode

Enable: Shut down either TP port or fiber port that is broken
Disable: Link LED indicators still on if connection of the other end is broken

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE

Protocols and Standards Compliance

IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus standard

Protocols and Standards Compliance

Cables

TP: Cat 5 / 5e / 6 UTP cable
Fiber: Multi-mode: 50/125 ㎛ or 62.5/125 ㎛ optic fiber
Single-mode: 9/125 ㎛ optic fiber

Environment

Temperature

0~50 degrees C

Humidity

5~90% (non-condensing)

100/1000BASE-X to 10/100/1000BASE-T PoE+ Media Converter

Datasheet

GTP-80x Series

Kullanım Kılavuzu

GTP-80x

Similar Products

1000BASE-X to 10/100/1000BASE-T 802.3at PoE+ Industrial Media Converter