Connects 24 Gigabit devices to each other with no configuration.

It gathers 24 10/100/1000BASE-T ports in a single unit and performs non-blocking wire-speed switching. It carries Gigabit connectivity from the network backbone to floor closets and desktop endpoints.

24Port Count

48 GbpsSwitching Capacity

35.7 MppsTransmission Speed

Layer 2Administration Type

0 ~ 40 °COperating Temperature

Key features

48Gbps

Switching capacity

Carries traffic without blocking while all 24 ports run at wire speed.

35.7Mpps

Transmission speed

Forwards small-packet local network traffic without delay.

Jumbo frames

Carries large file transfers with less header overhead.

4KV

RJ-45 surge protection

Protects the ports against power surges and lightning strikes.

16W

Maximum system power consumption

At 0 dB (A) acoustic noise it adds no sound load in the floor closet.

IN DAILY USE

No cable guessworkAuto-MDI/MDI-X works on every port, so straight-through cable is enough on every link.

Lower draw on quiet networksIEEE 802.3az Energy Efficient Ethernet lowers power draw on its own when the network quiets down.

Simple to deployIt runs with no configuration and fits a 13 inch rack space.

Usage areasNetwork backbone·Network edge·Desktop access

Technical Specifications
RJ-45 10/100/1000 Ports	24
SFP Uplink Ports	None
Performance
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Packet Buffer	4.1 Mbit
MAC Address Table	8K
Jumbo Frames	9K
MTBF	273,562 hrs
Heat Dissipation	13.7 kcal/h
Acoustic Noise	0 dB (A)
Surge Protection (RJ-45)	4 KV
Power
Power Supply	100-240 VAC, 50-60 Hz
Max. System Power Consumption	16 W
PoE (IEEE 802.3af/802.3at)	None
Mechanical
Rack Space	13"
Form Factor	Rackmount
Dimension (W × D × H)	280 × 180 × 44 mm (11.02 × 7.09 × 1.73 in.)
Weight	1.45 kg
Environmental
Operating Temperature	0 ~ 40°C
Storage Temperature	-40 ~ 70°C
Operating Humidity (non-condensing)	10% to 90%
Storage Humidity (non-condensing)	10% to 90%
WEEE	Yes
RoHS	Yes
Standards
Safety	LVD
Electromagnetic Compatibility (EMC)	CE Mark, FCC Class A, BSMI
Key Features and Benefits
IEEE 802.3az Energy-Efficient Ethernet Support	When two 802.3az-compliant switches are connected, power consumption in the ECS1020-16T / 24T / 10P / 16P can be saved by up to 61%, 65%, 46%, and 69% respectively.
Support for Jumbo Packets	Support for Jumbo packets of up to 9 K bytes in size.
Auto MDI/MDI-X on Each Port	Support for Auto-MDIX means that no crossover cables are required. Straight-through cables can be used for all connections.
Support VLAN Mode (ECS1020-16T only)	No VLAN: Dumb Switch Mode VLAN: Port 16 can communicate with ports 1-15 directly, ports 1-15 cannot communicate with each other, port 16 uplink, ports 1-16 10/100/1000 Mbps Auto-Negotiation (100 M) VLAN (Monitor): Port 16 can communicate with ports 1-15 directly, ports 1-15 cannot communicate with each other, port 16 uplink, ports 1-15 fixed 10 Mbps rate, port 16 10/100/1000 Mbps Auto-Negotiation (250 M)
Surge Protection	The ECS1020-16T / 24T / 10P / 16P provides 4/4/6/6 KV surge protection on the RJ-45 ports, which protects the switch from power surges and lightning strikes.
PoE Features	The ECS1020-10P / 16P can provide 802.3af/at power to attached devices such as VoIP phones, wireless access points, and surveillance cameras over existing Cat. 5 cables. The total PoE power budget for the ECS1020-10P / 16P supports up to 140/300 watts.

Technical Specifications

RJ-45 10/100/1000 Ports

SFP Uplink Ports

None

Performance

Switching Capacity

48 Gbps

Forwarding Rate

35.7 Mpps

Packet Buffer

4.1 Mbit

MAC Address Table

Jumbo Frames

MTBF

273,562 hrs

Heat Dissipation

13.7 kcal/h

Acoustic Noise

0 dB (A)

Surge Protection (RJ-45)

4 KV

Power

Power Supply

100-240 VAC, 50-60 Hz

Max. System Power Consumption

16 W

PoE (IEEE 802.3af/802.3at)

None

Mechanical

Rack Space

13"

Form Factor

Rackmount

Dimension (W × D × H)

280 × 180 × 44 mm (11.02 × 7.09 × 1.73 in.)

Weight

1.45 kg

Environmental

Operating Temperature

0 ~ 40°C

Storage Temperature

-40 ~ 70°C

Operating Humidity (non-condensing)

10% to 90%

Storage Humidity (non-condensing)

10% to 90%

WEEE

Yes

RoHS

Yes

Standards

Safety

LVD

Electromagnetic Compatibility (EMC)

CE Mark, FCC Class A, BSMI

Key Features and Benefits

IEEE 802.3az Energy-Efficient Ethernet Support

When two 802.3az-compliant switches are connected, power consumption in the ECS1020-16T / 24T / 10P / 16P can be saved by up to 61%, 65%, 46%, and 69% respectively.

Support for Jumbo Packets

Support for Jumbo packets of up to 9 K bytes in size.

Auto MDI/MDI-X on Each Port

Support for Auto-MDIX means that no crossover cables are required. Straight-through cables can be used for all connections.

Support VLAN Mode (ECS1020-16T only)

No VLAN: Dumb Switch Mode
VLAN: Port 16 can communicate with ports 1-15 directly, ports 1-15 cannot communicate with each other, port 16 uplink, ports 1-16 10/100/1000 Mbps Auto-Negotiation (100 M)
VLAN (Monitor): Port 16 can communicate with ports 1-15 directly, ports 1-15 cannot communicate with each other, port 16 uplink, ports 1-15 fixed 10 Mbps rate, port 16 10/100/1000 Mbps Auto-Negotiation (250 M)

Surge Protection

The ECS1020-16T / 24T / 10P / 16P provides 4/4/6/6 KV surge protection on the RJ-45 ports, which protects the switch from power surges and lightning strikes.

PoE Features

The ECS1020-10P / 16P can provide 802.3af/at power to attached devices such as VoIP phones, wireless access points, and surveillance cameras over existing Cat. 5 cables. The total PoE power budget for the ECS1020-10P / 16P supports up to 140/300 watts.

24 ports 10/100/1000Base-T Unmanaged Switch

Options

Datasheet

ECS1020-24T

TR

Sertifika

CE Belgesi

Similar Products

Unmanaged 8x 10/100/1000M PoE RJ45 ports (1-4 ports 802.3bt) + 2x GE SFP 300W PoE Ethernet Switch

Unmanaged 24x 10/100/1000M PoE RJ45 ports + 4x Gigabit Combo SFP 400W PoE Ethernet Switch

Unmanaged 8x 10/100/1000M PoE RJ45 ports + 2x GE SFP 120W PoE Ethernet Switch

Unmanaged 4x 10/100/1000M PoE RJ45 ports + 2x GE SFP 75W PoE Ethernet Switch