Manages the Gigabit network in a field cabinet and powers devices from its PoE+ ports.

A fanless metal case and DIN-rail mounting put it inside automation cabinets, while four PoE+ ports feed connected field devices over the data cable. CLI, web and SNMP management run on the switch, and ring redundancy keeps traffic up when a link drops.

6RJ-45 Ethernet ports

2SFP slots

16 GbpsSwitching capacity

120 WPoE power budget

-40°C ~ +75°COperating temperature

IP30Protection grade

Key features

30W

PoE+ power per port

Feeds PoE-compliant field devices over the data cable.

4096VLAN

Large VLAN pool

Defines port, tag, RADIUS and GVRP based groups.

16Gbps

Non-blocking switching

Every port runs at wire speed at the same time.

20ms

E-Ring path protection

Moves traffic to the backup path when a link breaks.

25years

Calculated MTBF

The fanless metal case holds no moving parts.

IN THE FIELD

DIN-rail and wall mountingClips onto the DIN rail in a cabinet and uses the wall plate in tight enclosures.

Redundant DC inputTakes two separate supply terminals and protects against reverse connection.

Alarm relay and LED warningPulls the relay on a supply or port fault and carries the warning to the panel.

ApplicationsRailway and traffic systems·Industrial field cabinets·Powering PoE-compliant devices

The switch does not include a power supply unit; order the PSU separately.

Ports
RJ-45 10/100/1000BASE-T Ports	6 (4 × PoE+ ports, 2 × non-PoE ports)
100/1000BASE-X SFP Ports	2 (with Digital Diagnostic Monitoring, DDM)
Console Port	1 × RJ-45 serial console
Other Interfaces	2 × DC power input, 1 × alarm port (top panel)
Performance
Switching Engine	Layer 2 wire-speed, non-blocking
Switching Capacity	16 Gbps
Forwarding Rate	17.9 Mpps
Throughput (packets per second)	14.8 Mpps
MAC Address Table	8 K
VLAN IDs	4096
Jumbo Frames	9 KB
Flash Memory / DRAM	16 MB / 128 MB
Auto-negotiation, Auto-MDI/MDI-X	Yes
Power over Ethernet (PoE)
PoE Standard	IEEE 802.3af / IEEE 802.3at (PSE)
Max. Power per Port	30 W / 15.4 W
Total PoE Power Budget	120 W
Ultra PoE	Not supported (available only on ECIS4500-8P2T4F)
PoE Power Management	PoE scheduling, power control, PD power consumption monitoring
Layer 2 Features
Flow Control	IEEE 802.3x (full-duplex mode), Back-Pressure (half-duplex mode)
Storm Control	Broadcast, multicast, flooding
Spanning Tree	IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
Ring Redundancy	E-Ring fast ring fail-over protection (< 20 ms)
VLAN	4096 VLANs; port-based, MAC-based, IP subnet-based, protocol-based, IEEE 802.1Q tag-based, RADIUS-assigned, GVRP; IEEE 802.1ad double tagging (Q-in-Q)
Link Aggregation	Static trunk, IEEE 802.3ad dynamic LACP; up to 8 ports per trunk group, 6 trunk groups
Multicast	Up to 255 multicast groups; IGMP v1/v2/v3 Snooping, IGMP querying, immediate leave and leave proxy, IGMP filtering/throttling
Layer 3 Functions
IP Interfaces	Max. 8 VLAN interfaces
Routing Table	Max. 32 routing entries
Routing Protocols	IPv4 and IPv6 software-based static routing
Quality of Service (QoS)
Priority Queues	8 queues per port
Traffic Scheduling	SPQ (Strict Priority Queuing), WRR (Weighted Round Robin)
Traffic Classification	IEEE 802.1p based CoS / port based; port-based traffic shaping; dynamic QoS assignment; DiffServ/ToS
Security
Access Control	Port security; IEEE 802.1X IP-based and MAC-based authentication; ACL (Access Control List)
Authentication	Username/password, local database, RADIUS, TACACS+, AAA
Secure Management	HTTPS and SSL (secured web), SSH (secured Telnet session)
Management
Management Interfaces	Cisco-like CLI via console port, web-based management, SNMP v1/v2c/v3; 5 terminal sessions
Monitoring	RMON1 (groups 1, 2, 3, 9), port mirroring, per VLAN mirroring, syslog (local flash), remote ping, NTP, LLDP (IEEE 802.1ab) and LLDP-MED, Ethernet copper connection diagnostic tool
DHCP	Client, relay, server, snooping, option 82
Firmware / Configuration	Software and configuration file upgrade/restore via TFTP
System Status	Device info/status, Ethernet port status, PoE status
Supported MIBs / RFCs	RFC 1213 MIB II, RFC 2863 and RFC 2233 Interfaces MIB, RFC 2819 RMON Statistics, RFC 1215 Generic Traps, RFC 2674 Q-Bridge MIB, RFC 3635 Ethernet-like MIB, RFC 2236 IGMPv2, RFC 3376 IGMPv3, RFC 2710 MLD, RFC 2464 IPv6 over Ethernet, RFC 4291 IPv6 Addressing, RFC 4884 ICMPv6
Alarm
Alarm Relay Output	Max. 0.5 A @ 24 V DC carrying capacity
System Alarm Notification	Configurable alarm profile: alarm LED, alarm relay, SNMP traps
Power
Power Input	Redundant input terminals (dual DC input), reverse power protection
Input Voltage Range	46–58 V DC (with PoE), 12–58 V DC (non-PoE)
Max. System Power Consumption	145 W
Power Consumption without PD Connected	Max. 14 W
Transient Protection	> 15,000 watts peak
Note	The switch does not include a power supply unit (PSU); the PSU must be purchased separately
Physical
Dimensions (W × D × H)	77 × 128 × 154 mm (3.03 × 5.04 × 6.06")
Weight	1.4 kg (3.11 lb)
Installation Options	DIN-rail mounting, wall mounting; fanless design
Ingress Protection	IP30, metal case
MTBF	> 25 years
Accessories	Wall-mount plates, DIN-rail clip, 4 × M3 screws, DC power terminal block, RJ-45 and SFP port dust covers
Environmental
Operating Temperature	-40°C ~ +75°C (-40°F ~ +167°F), cold startup at -40°C
Storage Temperature	-40°C ~ +85°C (-40°F ~ +185°F)
Operating Humidity	5% ~ 95%, non-condensing
Shock / Freefall / Vibration	IEC 60068-2-27 / IEC 60068-2-32 / IEC 60068-2-6
Standards and Compliance
Ethernet Standards	IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X (SX/LX/ZX), IEEE 802.3x flow control, IEEE 802.3az EEE, IEEE 802.3ad LACP, IEEE 802.3af PoE, IEEE 802.3at PoE+
Bridging / VLAN Standards	IEEE 802.1ab LLDP, IEEE 802.1p CoS, IEEE 802.1Q VLAN, IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP, IEEE 802.1ad Q-in-Q, IEEE 802.1x authentication
EMC	CE / FCC Part 15 Class A, CISPR 22 Class A, EN 61000-6-2:2005+AC:2005, EN 61000-6-4:2007+A1:2011, IEC 61000-4-2 ESD (contact 6 kV, air 8 kV), IEC 61000-4-3 RS (80 MHz – 2700 MHz, 20 V/m), IEC 61000-4-4 EFT (power 4 kV, signal 4 kV), IEC 61000-4-5 Surge (power 2 kV, signal 2 kV), IEC 61000-4-6 CS (signal 10 V), IEC 61000-4-8:2009, IEC 61000-4-9:1993+A1:2000
Safety	UL-60950, CB
Railway / Traffic	EN 50121-4 compliance, NEMA TS2 certified
Environmental Compliance	RoHS (Pb-free) and WEEE compliant

Ports

RJ-45 10/100/1000BASE-T Ports

6 (4 × PoE+ ports, 2 × non-PoE ports)

100/1000BASE-X SFP Ports

2 (with Digital Diagnostic Monitoring, DDM)

Console Port

1 × RJ-45 serial console

Other Interfaces

2 × DC power input, 1 × alarm port (top panel)

Performance

Switching Engine

Layer 2 wire-speed, non-blocking

Switching Capacity

16 Gbps

Forwarding Rate

17.9 Mpps

Throughput (packets per second)

14.8 Mpps

MAC Address Table

8 K

VLAN IDs

4096

Jumbo Frames

9 KB

Flash Memory / DRAM

16 MB / 128 MB

Auto-negotiation, Auto-MDI/MDI-X

Yes

Power over Ethernet (PoE)

PoE Standard

IEEE 802.3af / IEEE 802.3at (PSE)

Max. Power per Port

30 W / 15.4 W

Total PoE Power Budget

120 W

Ultra PoE

Not supported (available only on ECIS4500-8P2T4F)

PoE Power Management

PoE scheduling, power control, PD power consumption monitoring

Layer 2 Features

Flow Control

IEEE 802.3x (full-duplex mode), Back-Pressure (half-duplex mode)

Storm Control

Broadcast, multicast, flooding

Spanning Tree

IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP

Ring Redundancy

E-Ring fast ring fail-over protection (< 20 ms)

VLAN

4096 VLANs; port-based, MAC-based, IP subnet-based, protocol-based, IEEE 802.1Q tag-based, RADIUS-assigned, GVRP; IEEE 802.1ad double tagging (Q-in-Q)

Link Aggregation

Static trunk, IEEE 802.3ad dynamic LACP; up to 8 ports per trunk group, 6 trunk groups

Multicast

Up to 255 multicast groups; IGMP v1/v2/v3 Snooping, IGMP querying, immediate leave and leave proxy, IGMP filtering/throttling

Layer 3 Functions

IP Interfaces

Max. 8 VLAN interfaces

Routing Table

Max. 32 routing entries

Routing Protocols

IPv4 and IPv6 software-based static routing

Quality of Service (QoS)

Priority Queues

8 queues per port

Traffic Scheduling

SPQ (Strict Priority Queuing), WRR (Weighted Round Robin)

Traffic Classification

IEEE 802.1p based CoS / port based; port-based traffic shaping; dynamic QoS assignment; DiffServ/ToS

Security

Access Control

Port security; IEEE 802.1X IP-based and MAC-based authentication; ACL (Access Control List)

Authentication

Username/password, local database, RADIUS, TACACS+, AAA

Secure Management

HTTPS and SSL (secured web), SSH (secured Telnet session)

Management

Management Interfaces

Cisco-like CLI via console port, web-based management, SNMP v1/v2c/v3; 5 terminal sessions

Monitoring

RMON1 (groups 1, 2, 3, 9), port mirroring, per VLAN mirroring, syslog (local flash), remote ping, NTP, LLDP (IEEE 802.1ab) and LLDP-MED, Ethernet copper connection diagnostic tool

DHCP

Client, relay, server, snooping, option 82

Firmware / Configuration

Software and configuration file upgrade/restore via TFTP

System Status

Device info/status, Ethernet port status, PoE status

Supported MIBs / RFCs

RFC 1213 MIB II, RFC 2863 and RFC 2233 Interfaces MIB, RFC 2819 RMON Statistics, RFC 1215 Generic Traps, RFC 2674 Q-Bridge MIB, RFC 3635 Ethernet-like MIB, RFC 2236 IGMPv2, RFC 3376 IGMPv3, RFC 2710 MLD, RFC 2464 IPv6 over Ethernet, RFC 4291 IPv6 Addressing, RFC 4884 ICMPv6

Alarm

Alarm Relay Output

Max. 0.5 A @ 24 V DC carrying capacity

System Alarm Notification

Configurable alarm profile: alarm LED, alarm relay, SNMP traps

Power

Power Input

Redundant input terminals (dual DC input), reverse power protection

Input Voltage Range

46–58 V DC (with PoE), 12–58 V DC (non-PoE)

Max. System Power Consumption

145 W

Power Consumption without PD Connected

Max. 14 W

Transient Protection

> 15,000 watts peak

Note

The switch does not include a power supply unit (PSU); the PSU must be purchased separately

Physical

Dimensions (W × D × H)

77 × 128 × 154 mm (3.03 × 5.04 × 6.06")

Weight

1.4 kg (3.11 lb)

Installation Options

DIN-rail mounting, wall mounting; fanless design

Ingress Protection

IP30, metal case

MTBF

> 25 years

Accessories

Wall-mount plates, DIN-rail clip, 4 × M3 screws, DC power terminal block, RJ-45 and SFP port dust covers

Environmental

Operating Temperature

-40°C ~ +75°C (-40°F ~ +167°F), cold startup at -40°C

Storage Temperature

-40°C ~ +85°C (-40°F ~ +185°F)

Operating Humidity

5% ~ 95%, non-condensing

Shock / Freefall / Vibration

IEC 60068-2-27 / IEC 60068-2-32 / IEC 60068-2-6

Standards and Compliance

Ethernet Standards

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X (SX/LX/ZX), IEEE 802.3x flow control, IEEE 802.3az EEE, IEEE 802.3ad LACP, IEEE 802.3af PoE, IEEE 802.3at PoE+

Bridging / VLAN Standards

IEEE 802.1ab LLDP, IEEE 802.1p CoS, IEEE 802.1Q VLAN, IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP, IEEE 802.1ad Q-in-Q, IEEE 802.1x authentication

EMC

CE / FCC Part 15 Class A, CISPR 22 Class A, EN 61000-6-2:2005+AC:2005, EN 61000-6-4:2007+A1:2011, IEC 61000-4-2 ESD (contact 6 kV, air 8 kV), IEC 61000-4-3 RS (80 MHz – 2700 MHz, 20 V/m), IEC 61000-4-4 EFT (power 4 kV, signal 4 kV), IEC 61000-4-5 Surge (power 2 kV, signal 2 kV), IEC 61000-4-6 CS (signal 10 V), IEC 61000-4-8:2009, IEC 61000-4-9:1993+A1:2000

Safety

UL-60950, CB

Railway / Traffic

EN 50121-4 compliance, NEMA TS2 certified

Environmental Compliance

RoHS (Pb-free) and WEEE compliant

4 x 10/100/1000BASE-T PoE+ Ports, 2 x 10/100/1000BASE-T Ports, +2 10/100/1000BASE-X SFP Slots (4x 30W) - 120W

Datasheet

ECIS4500 PoE Series DS R02

ECIS4500 PoE Series DS - Turkish version

Kullanım Kılavuzu

ECIS4500 Quick Start Guide R01

ECIS4500 series Web Management Guide R01

ECIS4500 Series CLI Reference Guide R01

Sertifika

ECIS4500 CE DoC

Similar Products

L2 Managed 12 Port Gigabit + 4 Port Gigabit SFP Managed Industrial Switch

L2 Managed 8 Port Gigabit + 4 Port Gigabit SFP Managed Industrial Switch

L2 Managed 8 Port Gigabit + 2 Port Gigabit SFP Managed Industrial Switch

L2 Managed 4 Port Gigabit + 2 Port Gigabit SFP Managed Industrial Switch