Scans the underside of a passing vehicle and shows the image at once.

The system scans the underside of a passing vehicle at 2K resolution and covers the whole chassis with a 180° field of view. A stainless steel enclosure carries a load of 50 tons, while the built-in 20.7 inch FHD display shows the scan image at the same point.

2KScan Resolution

180°Field of View

50 tonsLoad-Bearing Capacity

1 secondImaging Time After Trigger

IP68Protection Grade

-35 °C / +70 °COperating Temperature

Key features

80km/h

Scans vehicles without stopping them

The recommended passing speed is 50 km/h, and the image appears 1 second after the trigger.

480W

Dynamic LED illumination

The LED array lights the underside of the vehicle during the scan.

1920 × 1080pixels

Built-in operator display

The LED-backlit panel runs at 250 cd/m² brightness with a 5 ms response time.

23W

Low energy draw

Consumption drops to 0.5 W in standby.

4500mm

Wide chassis coverage

The system scans vehicles up to this chassis width and from 60 mm chassis height upward in a single pass.

INSTALLATION AND USE

Inspection in one passThe system starts the scan by itself as the vehicle drives over it, so the operator checks the underside without stopping the vehicle.

On-site viewingThe built-in display shows the result at the same point, and the VGA and HDMI outputs carry the image to a second screen.

Works outdoorsThe stainless steel enclosure keeps working under the water and dust of the road surface.

The speaker output is optional.

Technical Specifications

Imaging Time After Exit Trigger

< 1 second

Maximum Vehicle Speed

80 km/h (49.7 mph), recommended < 50 km/h (31 mph)

Resolution

Field of View

180°

Compatibility

Standard / Optional

Load-Bearing Capacity

50 T (110,000 lb)

Chassis Height

≥ 60 mm (2.36")

Chassis Width

≤ 4500 mm (177.17")

Case Material

Stainless Steel

Input / Output

VGA (D-Sub) x1, HDMI x1, Audio x1, Speaker x1 (optional)

Power Consumption (Standard)

23 W

Power Consumption (Standby)

≤ 0.5 W

Display Size

20.7" (16:9)

Display Resolution

1920 × 1080 (FHD)

Backlight

LED

Brightness

250 cd/m²

Display Colors

16.7 Million

Contrast Ratio

1000:1

Viewing Angle

130° (vertical) / 178° (horizontal)

Response Time

5 ms

Power Supply

100–240 V AC

Illumination

480 W dynamic LED array

Weight

50 kg (110 lb)

Dimensions (L×W×H)

1195 × 322 × 278.6 mm (47" × 12.7" × 10.9")

Operating Temperature

-35°C to +70°C (-31°F to 158°F)

Protection Rating

IP68

Scans the underside of a passing vehicle and shows the image at once.

2KScan Resolution

180°Field of View

50 tonsLoad-Bearing Capacity

1 secondImaging Time After Trigger

IP68Protection Grade

-35 °C / +70 °COperating Temperature

Key features

80km/h

Scans vehicles without stopping them

The recommended passing speed is 50 km/h, and the image appears 1 second after the trigger.

480W

Dynamic LED illumination

The LED array lights the underside of the vehicle during the scan.

1920 × 1080pixels

Built-in operator display

The LED-backlit panel runs at 250 cd/m² brightness with a 5 ms response time.

23W

Low energy draw

Consumption drops to 0.5 W in standby.

4500mm

Wide chassis coverage

The system scans vehicles up to this chassis width and from 60 mm chassis height upward in a single pass.

INSTALLATION AND USE

Inspection in one passThe system starts the scan by itself as the vehicle drives over it, so the operator checks the underside without stopping the vehicle.

On-site viewingThe built-in display shows the result at the same point, and the VGA and HDMI outputs carry the image to a second screen.

Works outdoorsThe stainless steel enclosure keeps working under the water and dust of the road surface.

The speaker output is optional.

Technical Specifications

Imaging Time After Exit Trigger

< 1 second

Maximum Vehicle Speed

80 km/h (49.7 mph), recommended < 50 km/h (31 mph)

Resolution

Field of View

180°

Compatibility

Standard / Optional

Load-Bearing Capacity

50 T (110,000 lb)

Chassis Height

≥ 60 mm (2.36")

Chassis Width

≤ 4500 mm (177.17")

Case Material

Stainless Steel

Input / Output

VGA (D-Sub) x1, HDMI x1, Audio x1, Speaker x1 (optional)

Power Consumption (Standard)

23 W

Power Consumption (Standby)

≤ 0.5 W

Display Size

20.7" (16:9)

Display Resolution

1920 × 1080 (FHD)

Backlight

LED

Brightness

250 cd/m²

Display Colors

16.7 Million

Contrast Ratio

1000:1

Viewing Angle

130° (vertical) / 178° (horizontal)

Response Time

5 ms

Power Supply

100–240 V AC

Illumination

480 W dynamic LED array

Weight

50 kg (110 lb)

Dimensions (L×W×H)

1195 × 322 × 278.6 mm (47" × 12.7" × 10.9")

Operating Temperature

-35°C to +70°C (-31°F to 158°F)

Protection Rating

IP68

Under Vehicle Scan System

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera

Under Vehicle Scan System

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera