Stock Code: RGS-9000
| General | |
|---|---|
| Product Type | Industrial modular 19-inch rack mount managed Gigabit Ethernet switch with 4 slots |
| Series | RGS-9000 Series (RGS-P9000-LV / RGS-P9000-HV, RGS-PR9000-LV / RGS-PR9000-HV) |
| Layer | Layer 2 / Layer 3 (Layer 3 static routing, RIP and VRRP only on RGS-PR9000 Series) |
| Application | Power substation and rolling stock applications; compliant with the requirements of IEC 61850-3 and IEEE 1613 |
| Physical Ports | |
| Slot Number | 4 (up to 3 slots for 8 × 1G ports and 1 slot for 4 × 10G ports) |
| RJ-45 Module | Up to 3 slots; 8 × 10/100/1000Base-T(X) RJ-45 per slot |
| SFP Module | Up to 3 slots; 8 × 100/1000Base-X SFP per slot |
| 10G SFP+ Module | Up to 1 slot; 2/4 × 10G SFP+ |
| RS-232 Serial Console Port | RS-232 in RJ-45 connector with console cable (115200 bps, 8, N, 1) |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3ab for 1000Base-T; IEEE 802.z for 1000Base-X; IEEE 802.3ae for 10 Gigabit Ethernet; IEEE 802.3x for Flow Control; IEEE 802.3ad for LACP; IEEE 802.1p for CoS; IEEE 802.1Q for VLAN Tagging; IEEE 802.1w for RSTP; IEEE 802.1s for MSTP; IEEE 802.1x for Authentication; IEEE 802.1AB for LLDP |
| MAC Table | 8K (RGS-P9000 Series) / 32K (RGS-PR9000 Series) |
| Packet Buffer | 32 Mbits (RGS-PR9000 Series) |
| Flash Memory | 128 Mbits (RGS-PR9000 Series) |
| DRAM Size | 1 Gbits (RGS-PR9000 Series) |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching Latency | 7 µs |
| Switching Bandwidth | 128 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP Multicast Groups | 128 for each VLAN |
| Port Rate Limiting | User define |
| Jumbo Frame | Up to 9.6K Bytes |
| Network Redundancy | |
| Redundant Ring | O-Ring (recovery time < 30 ms over 250 units of connection) |
| Other Redundancy Protocols | Open-Ring, O-Chain, MRP (IEC 62439-2), MSTP (RSTP/STP compatible) |
| Software Features | |
| Management | Web-based interface, Telnet, Console (CLI) and Windows utility (Open-Vision); SNMP v1/v2c/v3 and RMON |
| Network Protocols | IPv6, Modbus TCP, DHCP Server/Client, DHCP Relay, DNS client proxy, SMTP client, NTP server, LLDP, IEEE 1588v2 clock synchronization, IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.1D Bridge (auto MAC address learning/aging and static MAC address) |
| QoS | Quality of Service (IEEE 802.1p) for real-time traffic, TOS/DiffServ, IP-based bandwidth management, application-based QoS management |
| VLAN | IEEE 802.1Q VLAN tagging and GVRP; VLAN unaware (priority-tagged frames to be received by specific IEDs) |
| Multicast | IGMP v2/v3 Snooping for filtering multicast traffic |
| Security | Device Binding security feature, enable/disable ports, MAC based port security, port based network access control (802.1x), single 802.1x and multiple 802.1x, MAC-based authentication, QoS assignment, Guest VLAN, MAC address limit, TACACS+, VLAN (802.1Q) to segregate and secure network traffic, RADIUS centralized password management, SNMPv3 encrypted authentication and access security, HTTPS/SSH, Web and CLI authentication and authorization (15 levels), IP source guard, ACL, DOS/DDOS auto prevention |
| Layer 3 Routing | Hardware routing, RIP and static routing, VRRP (only for RGS-PR9000 Series) |
| Monitoring and Warning | Port configuration, port status, port statistics, port monitoring and port security; multiple notification for warning of unexpected event |
| LED Indicators | |
| System Ready Indicator (PWR) | Green: indicates that the system is ready; the LED blinks when the system is upgrading firmware |
| Power Indicator (PWR1 / PWR2) | Green: Power LED × 2 |
| Ring Master Indicator (R.M.) | Green: indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green: indicates that the system is operating in O-Ring mode; green blinking: the ring is broken |
| Fault Indicator (Fault) | Amber: indicates that an unexpected event occurred |
| Reset To Default Running Indicator (DEF) | Green: system resets to default configuration |
| Supervisor Login Indicator (RMT) | Green: system is accessed remotely |
| Smart LED Display System | Link/Act (LK/ACT) / Speed (SPD) / Duplex (FDX) / Remote (RMT) green LED indicator × 4; MODE select button for mode selection; Port 1 ~ 28 Link/Act (LK/ACT) LED show: Green × 28 |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1 A at 24 VDC |
| Power | |
| Power Input | Redundant power input modular (two power modules for redundancy). LV models: dual 24/48 VDC (20~72 VDC) power inputs at terminal block; HV models: dual 88~264 VAC / 100~370 VDC power inputs at terminal block |
| Power Consumption (Typ.) | 46 W max. (LV models) / 43.5 W max. (HV models) |
| Overload Current Protection | Present |
| Physical Characteristic | |
| Enclosure | 19 inches rack mountable |
| Dimension (W × D × H) | 440 (W) × 325 (D) × 44 (H) mm (17.32 × 12.8 × 1.73 inches) |
| Weight | 6450 g (LV models) / 6600 g (HV models) |
| Environmental | |
| Operating Temperature | 10G SFP+ module absent: -40 to 85°C (-40 to 185°F); 10G SFP+ module used: -20 to 60°C (-4 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Humidity | 5% to 95%, non-condensing |
| Regulatory Approvals | |
| Power Automation | IEC 61850-3, IEEE 1613 |
| EMI | FCC Part 15, CISPR (EN55022) Class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Warranty | 5 years |
