Name: Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter
Brand: Planet
SKU: ICS-2102 / ICS-2102S15 / ICS-2105A

Brings serial devices onto an Ethernet network over fiber.

A serial device server that converts RS232, RS422 and RS485 communication to an industrial Ethernet network over 100BASE-FX fiber. It extends network distance while the existing serial hardware and software stay in place.

1 x DB9 (RS232)Serial port

1 x 100BASE-FXFiber interface

9 ~ 48V DC / 24V ACRedundant power

IP30Protection Grade

-40 ~ 75 °COperating Temperature

Key features

921600bps

High serial data rate

Asynchronous serial traffic runs between 50 bps and this value.

4hosts

TCP client access

In TCP client mode it reaches up to four hosts.

6KV

Ethernet ESD protection

Guards the port against electrostatic discharge arriving on the line.

2KV

Surge protection

Adds a second protection layer against voltage spikes.

DAILY USE

Remote managementA web interface, a Telnet console and the Windows-based VCOM utility manage the unit over the network.

Serial devices stay in placeCard readers, PLCs and control panels join the Ethernet network without replacement.

Fault alarmThe fault alarm warns the administrator when the link drops or the unit reboots.

Usage AreasAccess control systems·PLC and process control·Camera control systems

Fiber distance, connector type and weight vary with the selected model.

Serial Interface

Serial Ports

ICS-2105AT
1 x DB9 male for RS232
1 x 4-Pin Terminal block for RS422 / RS485

ICS-2102T
1 x DB9 male for RS232
1 x 4-Pin Terminal block for RS422 / RS485

ICS-2102TS
1 x DB9 male for RS232
1 x 4-Pin Terminal block for RS422 / RS485

Serial Standards

RS232 / 4-wire RS422 or RS485 / 2-wire RS485

Baud Rate (Data Rate)

50bps to 921Kbps

Data Bits

5, 6, 7, 8

Parity Type

Odd, Even, None, Space, Mark

Stop Bit

1, 1.5, 2

Flow Control

RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF

Signals

RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GND

Pin Assignment

Serial Port Pin	RS232	RS422 / RS485-4W	RS485-2W
1	DCD	TxD+	--
2	RxD	TxD-	--
3	TxD	RxD-	Data-
4	DTR	RxD+	Data+
5	GND	GND	GND
6	DSR	--	--
7	RTS	--	--
8	CTS	--	--
9	--	--	--

Pin	RS422 / RS485-4W	RS485-2W
1	TxD+(A)	--
2	TxD-(B)	--
3	RxD-(B)	Data-(B)
4	RxD+(A)	Data+(A)

Ethernet Interface

Ethernet Ports

ICS-2105AT: 1 x SFP
ICS-2102T / ICS-2102TS: 1 x Duplex SC

Standard

100BASE-FX

Connector

ICS-2105AT: LC (SFP)
ICS-2102T / ICS-2102TS: Duplex SC

Fiber Mode

ICS-2105AT: Single mode or multi-mode (may vary on SFP module)
ICS-2102T: Multi-mode
ICS-2102TS: Single mode

Transmission Mode

Full duplex

Distance

ICS-2105AT: 2km to 120km (may vary on SFP module)
ICS-2102T: 2km
ICS-2102TS: 30km

Cable

ICS-2105AT:
50 or 62.5/125μm multi-mode fiber cable
9/125μm single-mode cable

ICS-2102T: 50/125μm or 62.5/125μm multi-mode fiber cable

ICS-2102TS: 9/125μm single-mode cable

ESD Protection

6KV

Surge Protection

2KV

Hardware

Installation

DIN-rail kit and wall-mount ear

Enclosure

IP30 metal

Dimensions (W x D x H)

32 x 87.8 x 135 mm

Weight

ICS-2105AT: 390g
ICS-2102T: 386g
ICS-2102TS: 391g

LED Indicators

System: Power 1, Power 2, Fault, SYS
SFP: Link/Active
Serial Port: Tx and Rx

Power Requirements

9~48V DC / 24V AC, redundant power with reverse polarity protection

Power Consumption

ICS-2105AT:
Full Loading
9VDC: 0.44A (3.96 watts)
12VDC: 0.33A (4 watts)
24VDC: 0.17A (4.08 watts)
48VDC: 0.1A (4.8 watts)

ICS-2102T:
Full Loading
9VDC: 0.56A (5 watts)
12VDC: 0.42A (5 watts)
24VDC: 0.23A (5.5 watts)
48VDC: 0.13A (6 watts)

ICS-2102TS:
Full Loading
9VDC: 0.56A (5 watts)
12VDC: 0.42A (5 watts)
24VDC: 0.23A (5.5 watts)
48VDC: 0.13A (6 watts)

Connector

Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Alarm

Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

Management

Management Interfaces

Web management
Telnet Console management
Windows-based VCOM Utility management
SNMPv1, v2c / SNMP Trap
UNI-NMS monitoring
PLANET Smart Discovery Utility

IP Version

IPv4 and IPv6

Operation Mode

TCP Server
TCP Client
UDP Client
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)
Modbus converter server / client

Virtual COM Utility Platform Supports

Windows-based only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install the latest version of WinPcap)
Windows Server 2012 (Must install the latest version of WinPcap)
Windows 10

Security

Allows maximum 4 accessible IP address hosts/ranges

SNMP MIBs

RFC1213 MIB-II
RFC1317 RS232-like MIB

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A,
CE Certification Class A
RoHS

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Standards

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-FX
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL's
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485

Environment

Operating Temperature

-40 ~ 75 degrees C

Storage Temperature

-40 ~ 85 degrees C

Humidity

5 ~ 95% (non-condensing)

Brings serial devices onto an Ethernet network over fiber.

1 x DB9 (RS232)Serial port

1 x 100BASE-FXFiber interface

9 ~ 48V DC / 24V ACRedundant power

IP30Protection Grade

-40 ~ 75 °COperating Temperature

Key features

921600bps

High serial data rate

Asynchronous serial traffic runs between 50 bps and this value.

4hosts

TCP client access

In TCP client mode it reaches up to four hosts.

6KV

Ethernet ESD protection

Guards the port against electrostatic discharge arriving on the line.

2KV

Surge protection

Adds a second protection layer against voltage spikes.

DAILY USE

Remote managementA web interface, a Telnet console and the Windows-based VCOM utility manage the unit over the network.

Serial devices stay in placeCard readers, PLCs and control panels join the Ethernet network without replacement.

Fault alarmThe fault alarm warns the administrator when the link drops or the unit reboots.

Usage AreasAccess control systems·PLC and process control·Camera control systems

Fiber distance, connector type and weight vary with the selected model.

Serial Interface

Serial Ports

Serial Standards

RS232 / 4-wire RS422 or RS485 / 2-wire RS485

Baud Rate (Data Rate)

50bps to 921Kbps

Data Bits

5, 6, 7, 8

Parity Type

Odd, Even, None, Space, Mark

Stop Bit

1, 1.5, 2

Flow Control

RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF

Signals

RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GND

Pin Assignment

Serial Port Pin	RS232	RS422 / RS485-4W	RS485-2W
1	DCD	TxD+	--
2	RxD	TxD-	--
3	TxD	RxD-	Data-
4	DTR	RxD+	Data+
5	GND	GND	GND
6	DSR	--	--
7	RTS	--	--
8	CTS	--	--
9	--	--	--

Pin	RS422 / RS485-4W	RS485-2W
1	TxD+(A)	--
2	TxD-(B)	--
3	RxD-(B)	Data-(B)
4	RxD+(A)	Data+(A)

Ethernet Interface

Ethernet Ports

ICS-2105AT: 1 x SFP
ICS-2102T / ICS-2102TS: 1 x Duplex SC

Standard

100BASE-FX

Connector

ICS-2105AT: LC (SFP)
ICS-2102T / ICS-2102TS: Duplex SC

Fiber Mode

ICS-2105AT: Single mode or multi-mode (may vary on SFP module)
ICS-2102T: Multi-mode
ICS-2102TS: Single mode

Transmission Mode

Full duplex

Distance

ICS-2105AT: 2km to 120km (may vary on SFP module)
ICS-2102T: 2km
ICS-2102TS: 30km

Cable

ICS-2105AT:
50 or 62.5/125μm multi-mode fiber cable
9/125μm single-mode cable

ICS-2102T: 50/125μm or 62.5/125μm multi-mode fiber cable

ICS-2102TS: 9/125μm single-mode cable

ESD Protection

6KV

Surge Protection

2KV

Hardware

Installation

DIN-rail kit and wall-mount ear

Enclosure

IP30 metal

Dimensions (W x D x H)

32 x 87.8 x 135 mm

Weight

ICS-2105AT: 390g
ICS-2102T: 386g
ICS-2102TS: 391g

LED Indicators

System: Power 1, Power 2, Fault, SYS
SFP: Link/Active
Serial Port: Tx and Rx

Power Requirements

9~48V DC / 24V AC, redundant power with reverse polarity protection

Power Consumption

Connector

Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Alarm

Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

Management

Management Interfaces

Web management
Telnet Console management
Windows-based VCOM Utility management
SNMPv1, v2c / SNMP Trap
UNI-NMS monitoring
PLANET Smart Discovery Utility

IP Version

IPv4 and IPv6

Operation Mode

TCP Server
TCP Client
UDP Client
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)
Modbus converter server / client

Virtual COM Utility Platform Supports

Security

Allows maximum 4 accessible IP address hosts/ranges

SNMP MIBs

RFC1213 MIB-II
RFC1317 RS232-like MIB

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A,
CE Certification Class A
RoHS

Stability Testing

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Standards

Environment

Operating Temperature

-40 ~ 75 degrees C

Storage Temperature

-40 ~ 85 degrees C

Humidity

5 ~ 95% (non-condensing)

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Datasheet

ICS-2102 / ICS-2102S15 / ICS-2105A

Kullanım Kılavuzu

ICS-2102 / ICS-2102S15 / ICS-2105A

ICS-2102 / ICS-2102S15 / ICS-2105A

Similar Products

1-Port Ethernet Switch (Unmanaged)

RS-232 / RS-422 / RS-485 over Fast Ethernet Media Converter

10/100BASE-TX to 100BASE-FX Smart Media Converter

4-Port 10/100Base-TX + 1-Port BNC / RJ-11 Industrial Ethernet Extender

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Datasheet

ICS-2102 / ICS-2102S15 / ICS-2105A

Kullanım Kılavuzu

ICS-2102 / ICS-2102S15 / ICS-2105A

ICS-2102 / ICS-2102S15 / ICS-2105A

Similar Products

1-Port Ethernet Switch (Unmanaged)

RS-232 / RS-422 / RS-485 over Fast Ethernet Media Converter

10/100BASE-TX to 100BASE-FX Smart Media Converter

4-Port 10/100Base-TX + 1-Port BNC / RJ-11 Industrial Ethernet Extender