A D-type simplex adapter that aligns single-mode fiber ends with an FC/PC interface face to face. A nickel-plated brass body and a zirconia alignment sleeve hold the connector ends on a common axis.
FC/PCconnector type
SMfiber type
9/125 µmfiber size
Simplexconfiguration
< 0.3 dBinsertion loss
Key features
0.3dB
Low insertion loss
Optical loss across the adapter stays below 0.3 dB.
Zirconiasleeve
Precise alignment
The ceramic sleeve holds the two connector ends on a common axis.
M8×0.75
Threaded at both ends
Both ends of the adapter carry an M8×0.75 thread.
Ø11mm
D-type flange
The body flange is Ø11 mm in diameter and 1.9 mm thick.
15mm
Short body
Overall length is 15 mm and the flange-to-end length is 8.6 mm.
Brassnickel
Metal body and locking parts
The body, insert and lock nut are brass; the lock washer is copper. All are nickel plated.
Package and compliance
What is in the boxThe package holds the adapter body, insert, alignment sleeve, hex nut and star washer.
VW-1 dust capThe dust cap is VW-1 rated PVC.
RoHS compliantThe product conforms to the RoHS regulation.
