Carries analog HD video and serial data over a fiber link.

A transmitter-receiver pair that carries analog HD camera video and a serial data channel over a fiber optic link. It combines BNC video inputs and the RS232/RS422 data line on a single fiber.

1080PAnalog HD video

AHD / HD-TVI / HD-CVISupported formats

10-bitDigital encoding

BNCVideo interface

1310 / 1470 / 1610 nmOptical wavelength

Key features

Analog HD videoSupports 1080P (1920 x 1080) resolution.

Format detectionAutomatically detects AHD, HD-TVI, HD-CVI, PAL, NTSC and SECAM video systems.

Video pathVideo input and output use a 75 Ohm unbalanced BNC interface at a standard 1.0 Vp-p level.

Data channelCarries RS232 and RS422 formats at data rates of 0-300 Kbps.

Optical pathWorks with 9/125 micron singlemode and 50/125 micron multimode fiber; receiver sensitivity is -25 dBm.

PowerRuns on AC 110-220 V and DC 5 V supply and operates at 0-95% non-condensing humidity.

Video Parameters
Video Input/Output Impedance	75 OHm (unbalanced)
Standard Video Input/Output Voltage	1.0Vp-p Typical
Video Voltage Range	0.6-2.0 Vp-p Type
Differential Gain (10%-90% APL)	<1% Type
Differential Phase (10%-90% APL)	<±1 Type
Signal to Noise Ratio	> 60Db (Weighted 8Bit) < 70Db (Weighted 8Bit)
Physical Channel Interface	BNC
Audio Parameters
Audio Input/Output Impedance	600Ohm (unbalanced)
Audio Maximum Input/Output Voltage	2.0 Vp-p
Audio Input/Output Level	0 dbm (typical value)
Frequency Response	10Hz -20kHz
Total Harmonic Distortion	< 0.05%
Signal to Noise Ratio	> 95Db (weighted)
Physical Channel Interface	Terminal blocks
Data Parameters
Data Format	Rs232 / Rs422
Data Rate	0-300 Kbps
Bit Error Rate	10-9
Physical Channel Interface	Terminal blocks
Optical Parameters
Connector	FT/ST/SC (Optional)
Wavelength	1310nm&1470nm&1610nm
Fiber Type	50/125u multimode, 62.5/12.5u multimode, 9/125u singlemode
Optical Output Power	-8 ~ -3 Dbm
Receiver Sensitivity	-25 Dbm
Optical Interface	Simplex
Switching Parameters
Physical Interface	Terminal blocks
Signal Input	Alarm or switching value input, supports TTL, Rs-232/422/485 or switches, buttons
Signal Output	Alarm or switching value output, supports TTL, Rs-232/422/485 or Contact Relay output
General Parameters
Power Source	AC 110 -220V - DC 5V
Operating Ambient Temperature	10°C+70°C
Humidity Ratio	0 -95% (non-condensing)

Video Parameters

Video Input/Output Impedance

75 OHm (unbalanced)

Standard Video Input/Output Voltage

1.0Vp-p Typical

Video Voltage Range

0.6-2.0 Vp-p Type

Differential Gain (10%-90% APL)

<1% Type

Differential Phase (10%-90% APL)

<±1 Type

Signal to Noise Ratio

> 60Db (Weighted 8Bit)
< 70Db (Weighted 8Bit)

Physical Channel Interface

BNC

Audio Parameters

Audio Input/Output Impedance

600Ohm (unbalanced)

Audio Maximum Input/Output Voltage

2.0 Vp-p

Audio Input/Output Level

0 dbm (typical value)

Frequency Response

10Hz -20kHz

Total Harmonic Distortion

< 0.05%

Signal to Noise Ratio

> 95Db (weighted)

Physical Channel Interface

Terminal blocks

Data Parameters

Data Format

Rs232 / Rs422

Data Rate

0-300 Kbps

Bit Error Rate

10-9

Physical Channel Interface

Terminal blocks

Optical Parameters

Connector

FT/ST/SC (Optional)

Wavelength

1310nm&1470nm&1610nm

Fiber Type

50/125u multimode, 62.5/12.5u multimode, 9/125u singlemode

Optical Output Power

-8 ~ -3 Dbm

Receiver Sensitivity

-25 Dbm

Optical Interface

Simplex

Switching Parameters

Physical Interface

Terminal blocks

Signal Input

Alarm or switching value input, supports TTL, Rs-232/422/485 or switches, buttons

Signal Output

Alarm or switching value output, supports TTL, Rs-232/422/485 or Contact Relay output

General Parameters

Power Source

AC 110 -220V - DC 5V

Operating Ambient Temperature

10°C+70°C

Humidity Ratio

0 -95% (non-condensing)

Fiber Media Converter - 8 Video + 1 Data - Pair support AHD 1080P

Options

Fiber Media Converter - 8 Video + 1 Data - Pair support AHD 1080P

Options