Stock Code: KX1076
| Video Parameters | |
|---|---|
| Video Input / Output Impedance | 75 Ohm (unbalanced) |
| Standard Video Input / Output Voltage | 1.0 Vp-p (typical) |
| Video Voltage Range | 0.6 ~ 2.0 Vp-p (typical) |
| Differential Gain (10% - 90% APL) | <1% (typical) |
| Differential Phase (10% - 90% APL) | < ±1° (typical) |
| Signal-to-Noise Ratio | > 60 dB (weighted) (8 bit) > 70 dB (weighted) (8 bit) |
| Physical Channel Interface | BNC |
| Audio Parameters | |
| Audio Input / Output Impedance | 600 Ohm (unbalanced) |
| Maximum Audio Input / Output Voltage | 2.0 Vp-p |
| Audio Input / Output Level | 0 dBm (typical value) |
| Frequency Response | 10 Hz ~ 20 kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 95 dB (weighted) |
| Physical Channel Interface | Terminal block |
| Data Parameters | |
| Data Format | RS232 / RS422 / RS485 |
| Data Rate | 0 ~ 300 kbps |
| Bit Error Rate | 10-9 |
| Physical Channel Interface | Terminal block |
| Optical Parameters | |
| Connector | FC / ST / SC (optional) |
| Wavelength | 1310 nm & 1470 nm ~ 1610 nm |
| Fiber Type | 50/125 µm multi-mode, 62.5/125 µm multi-mode, 9/125 µm single-mode |
| Optical Output Power | -8 ~ -3 dBm |
| Receiver Sensitivity | -25 dBm |
| Optical Interface | Simplex |
| Switching Parameters | |
| Physical Interface | Terminal block |
| Signal Input | Alarm or switching value input; supports TTL, RS-232/422/485 or switches and buttons |
| Signal Output | Alarm or switching value output; supports TTL, RS-232/422/485 or contact relay output |
| General Parameters | |
| Power Supply | AC 110-220V → DC 5V |
| Operating Temperature | -10 °C ~ +70 °C |
| Humidity | 0% ~ 95% (non-condensing) |
| Package Contents | |
| Before installation, make sure the package contents are complete. Optical transmitter – 1 pc Optical receiver – 1 pc AC/DC power adapter – 2 pcs User manual – 1 pc If anything is missing from the package, please contact your authorised dealer. | |
