Announces the moment of release with light and text.

A wall-type warning sign with an ultra-thin metal body that announces the release in a gas extinguishing system. The panel flashes to warn people in the zone and talks to the control panel over a two-wire bus.

DC 24 VOperating Voltage

Non-polar two-wire busCommunication mode

≤ 1500 mCommunication distance

1 – 254Coding range

1 Hz – 2 HzFlashing frequency

-10°C ~ +55°COperating Temperature

Key features

LED backlit panelThe high-brightness LED backlight lights the surface evenly and keeps the warning text visible from a distance.

Flashing warningDuring the release the indicator flashes between 1 Hz and 2 Hz.

Two-wire connectionThe polarity-free two-wire protocol shortens the wiring and carries communication up to 1500 meters.

Electronic codingThe installer gives the device any address between 1 and 254, and the panel recognizes the device by that address.

Corrosion-resistant bodyThe stainless steel casing and the circuit board coated with three-proof paint resist moisture and corrosion.

Slim wall mountingThe body, measuring 369.0 mm × 131.0 mm × 8.0 mm, sits on the wall surface and weighs 0.47 kg.

Technical Specification

Operating Voltage

DC 24V

Operating Current

Static current: ≤ 300 µA
Alarm current: ≤ 20 mA

Indicator Lights

Red

Coding Range

Electronically encoded, with any setting between 1 and 254

Communication Distance

≤ 1500 m (4921.26 ft)

Communication Mode

Non-polar Two-wire bus

Flashing Frequency

1 Hz to 2 Hz

Operating Temperature

–10°C to +55°C (+14°F to +131°F)

Storage Temperature

–20°C to +65°C (–4°F to +149°F)

Operating Humidity

≤ 95% RH (no condensation)

Dimensions

L × W × H: 369.0 mm × 131.0 mm × 8.0 mm (14.53" × 5.16" × 0.31")

Weight

0.47 kg (1.04 lb)

Certifications