Stock Code: VTM116-01
| General | |
|---|---|
| Model | VTM116-01 |
| Product Type | Flush Mounted Box |
| Material | ADC12 |
| Dimensions | |
| Dimensions (Front) | 138.0 mm × 240.0 mm × 35.0 mm (5.43" × 9.45" × 1.38") |
| Dimensions (Rear) | 120.8 mm × 222.7 mm × 33.0 mm (4.76" × 8.77" × 1.30") |
| Wall Opening Dimensions | 120.8 mm × 222.7 mm × 33.0 mm (4.76" × 8.77" × 1.30") |
| Installation | |
| Step 1 | Cut an opening with the size of the mounting box on the wall. |
| Step 2 | Pull the reserved cables through the cable hole on the mounting box, and then fix the mounting box in the wall with cement. |
| Step 3 | Connect the cables to the ports on the VTO rear panel through the enclosure. |
| Step 4 | Fix the VTO in the enclosure with the M3 screws, and then put sealant between the VTO and the enclosure. |
| Step 5 | Fix the VTO and the enclosure in the mounting box with the ST4×25 screws. |
