Stock Code: RG-MAP552
| General | |
|---|---|
| Model | RG-MAP552 |
| Wireless | |
| Radio | Dual |
| Protocol | 802.11a/b/g/n/ac |
| Operating Bands | 2.4GHz and 5GHz |
| Antenna | Built-in directional antenna (5G) Built-in antenna (2.4G) |
| Spatial Streams | 2 |
| Max. Throughput | 300Mbps@2.4GHz 867Mbps@5GHz 1.167Gbps per AP |
| Modulation | OFDM: BPSK@6/9Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps DQPSK@2Mbps CCK@5.5/11Mbps MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM |
| Receiver Sensitivity | 11b: -99dBm(1Mbps), -90dBm(5Mbps), -87dBm(11Mbps) 11a: -92dBm(6Mbps), -87dBm(24Mbps), -84dBm(36Mbps), -75dBm(54Mbps) 11g: -93dBm(6Mbps), -88dBm(24Mbps), -86dBm(36Mbps), -78dBm(54Mbps) 11ng: -94Bm@MCS0, -74dBm@MCS7, -93dBm@MCS8, -73dBm@MCS15 11na: -94dBm@MCS0, -72dBm@MCS7, -93dBm@MCS8, -72dBm@MCS15 11ac HT20: -90dBm (MCS0), -63dBm (MCS9) 11ac HT40: -85dBm (MCS0), -60dBm (MCS9) 11ac HT80: -82dBm (MCS0), -58dBm (MCS9) |
| Transmit Power | 100mW (20dBm, transmit power of the RF card only) |
| Adjustable Power | 1dBm |
| Ports and Hardware | |
| Service Port | 1-port 10/100/1000BASE-T uplink (PoE), 2 FE LAN ports |
| Management Port | N/A |
| Lock | Standard: Anti-theft screws and ordinary screws Optional: Lock and key |
| LED Indicators | 1 connection status indicator (switch off upon request) |
| IP Rating | IP41 |
| Dimensions (W × D × H) (mm) | ø138 × 35 (diameter × height) (height of AP only, excluding mount kit) |
| Weight | 0.385kg |
| Installation Mode | Wall/ceiling mountable |
| Power Supply | Via PoE |
| Power Consumption | <7W |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 5% to 95%RH (non-condensing) |
| Storage Humidity | 5% to 95%RH (non-condensing) |
| Standards and Certifications | |
| Safety Standard | GB4943-2001 |
| EMC Standard | GB9254-2008, GB17625.1-2003 |
| Health Standard | EN 62311 |
| Radio Standard | Wireless transmission equipment approval, EN300 328, EN301 893 |
| Vibration Standard | IEC600682-31, ETSI EN300 019, NEBS GR-63-CORE |
| Wi-Fi Alliance Certification | Support |
| WLAN | |
| Maximum stations per AP | 32 |
| Virtual AP | A maximum of 8 SSIDs |
| SSID hiding | Support |
| Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID | Support |
| WDS (bridge mode) | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| X-speed | Support |
| Intelligent identification of smart device | Support |
| Intelligent load balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5 GHz (band select) | Support |
| Wireless location | Support |
| Security | |
| PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| WeChat authentication | Support |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| WAPI | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| WIDS (Wireless Intrusion Detection System) | Support |
| Remote probe | Support |
| Routing | |
| IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP Tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| IPv6 tunnel | Manual or automatic configuration |
| IPv6 transparent transmission | Support |
| ISATAP | Support |
| Multicast | Multicast to unicast conversion |
| Management and Maintenance | |
| Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and Web management |
| Visualized wireless heat map analysis | Support |
| Fault detection and alarm | Support |
| Statistics and logs | Support |
