Stock Code: RG-AP520-I(G2)
| Model | |
|---|---|
| Model | RG-AP520-I(G2) |
| Target Distributions | For higher education, public, healthcare, finance and enterprise sectors |
| Basic Technical Specifications | |
| Radio | Simultaneous dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac |
| Operating bands | 802.11b/g/n: 2.4GHz to 2.483GHz; 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz (varies by country) |
| Antenna | Built-in "X-Sense 3" Smart Antenna; 2.4G: 2×2 MIMO; 5G: 2×3 MIMO |
| Antenna gain | 3dBi |
| Maximum rate | 300Mbps@2.4GHz; 867Mbps@5GHz; 1.167Gbps per AP |
| Spatial streams | 2 |
| Modulation | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps; DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps; MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM |
| Maximum transmission power | ≤100mW (20dBm, RF card transmission power only) |
| IP rating | IP41 |
| Receiver Sensitivity | 11b: -99dBm (1Mbps), -93dBm (5.5Mbps), -90dBm (11Mbps); 11a/g: -93dBm (6Mbps), -85dBm (24Mbps), -82dBm (36Mbps), -77dBm (54Mbps); 11n: -92dBm@MCS0, -74dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15; 11ac HT20: -90dBm (MCS0), -63dBm (MCS9); 11ac HT40: -85dBm (MCS0), -60dBm (MCS9); 11ac HT80: -82dBm (MCS0), -58dBm (MCS9) |
| Ports | |
| Service Port | 2 × 10/100/1000BASE-T Ethernet uplink ports; 1 × USB 2.0 port |
| Management Port | 1 console port (RJ45) |
| Power | |
| Power Source | Local power supply (DC 48V) and PoE (802.3af) (Power adapters sold separately) |
| Power consumption | <12.95W |
| WLAN | |
| Maximum clients per AP | Up to 256 |
| BSSID capacity | Up to 16 per radio; up to 32 per AP |
| SSID hiding | Supports |
| Configuration of authentication mode, encryption mechanism and VLAN attributes per SSID | Supports |
| Remote Control Smart Sensing Technology (RIPT) | Supports |
| X-speed | Supports |
| Smart load balancing based on number of users or traffic | Supports |
| STA control | SSID/radio based |
| Bandwidth control | STA/SSID/AP based speed control |
| Preference for 5GHz (band steering) | Supports |
| Wireless location tracking | Supports |
| Dynamic Frequency Selection (DFS) | Future version support |
| Security | |
| PSK, web, and 802.1x authentication | Supports |
| Data encryption | WPA (TKIP), WPA2 (AES), WPA-PSK and WEP (64 or 128 bit) |
| QR code authentication | Supports |
| SMS authentication | Supports |
| PEAP authentication | Supports |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Supports |
| Rogue AP detection and countermeasures | Supports |
| Dynamic ACL assignment | Supports |
| RADIUS | Supports |
| CPU Protection Policy (CPP) | Supports |
| Network Foundation Protection Policy (NFPP) | Supports |
| Wireless Intrusion Detection System (WIDS) | Supports |
| Wireless Intrusion Prevention System (WIPS) | Supports |
| Bluetooth | |
| BT4.0 (BLE) | N/A |
| iBeacon | N/A |
| Routing | |
| IPv4 address | Static IP address |
| IPv6 CAPWAP tunnel | Supports |
| ICMPv6 | Supports |
| IPv6 address | Manual or automatic configuration |
| IPv6 tunnel | Manual or automatic configuration |
| IPv6 transparent transmission | Supports |
| ISATAP | Supports |
| Multicast | Multicast to unicast conversion |
| External Features | |
| Lock | Supports |
| LED indicators | 1 LED (red, green, blue, orange and blinking modes; breathing-blinking mode for smart device access; indicator can be turned off for silent mode) |
| Related Standards | |
| Wi-Fi alliance certification | Supports |
| Safety standard | GB4943, EN/IEC 60950-1 |
| EMC standard | GB9254, GB17618, EN301 489-1, EN301 489-17, EN55022, EN55024 |
| Health standards | EN 62311 |
| Radio standards | EN300 328, EN301 893 |
| Vibration standard | IEC60068-2-31, ETSI EN300 019, NEBS GR-63-CORE |
| Technical Specifications | |
| Dimensions (W × D × H) (mm) | 205 × 205 × 42 |
| Weight | 0.8kg |
| Working Environment | |
| Temperature | Operating Temperature: -10°C to 45°C; Storage Temperature: -40°C to 70°C |
| Humidity | Operating Humidity: 5% to 95% (non-condensing); Storage Humidity: 5% to 95% (non-condensing) |
| Installation Mode | Ceiling/wall mountable |
| Management and Maintenance | |
| Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, FTP and web management |
| Visualized wireless heat map analysis | Supports (requires integration with SNC) |
| Real-time spectrum analysis | Supports (requires integration with SNC) |
| Fault detection and alarm | Supports |
| Cloud AC management | Supports |
| Statistics and logs | Supports |
| FAT/FIT switching | An AP operating in FIT mode can switch to FAT mode via an RG-WS wireless AC; an AP operating in FAT mode can switch to FIT mode via a local console port or Telnet |
