Name: Slim Type 4 x 10/100/1000TX (RJ-45) PoE+, + 2 x 100/1000Base-X SFP slot
Brand: Oring Industrial
SKU: IGPS-1042GPA

Powers cameras and access points over the data cable.

It gathers 4 10/100/1000Base-T(X) PoE+ ports and 2 100/1000Base-X SFP sockets into a slim metal housing 26.1 mm wide. It carries no management interface; it powers edge devices directly and reaches the backbone through its fiber sockets.

410/100/1000Base-T(X) PoE+ ports

2100/1000Base-X SFP ports

120 WTotal PoE power budget

30 WPoE power per port

-40 to +75 °COperating Temperature

IP-30Protection Grade

Key features

30W

IEEE 802.3at PoE+

Every copper port powers a camera or an access point.

12Gbps

Switching Capacity

Carries all ports at full speed at the same time.

10240bytes

Jumbo frame

Moves large data blocks in a single frame.

50~57VDC

Dual power input

The second source keeps the supply up when the first one drops.

6.5W

Own power draw

Apart from the PoE output, the unit itself draws little power.

458g

Slim metal housing

The IP-30 body fits into narrow cabinets.

IN DAILY USE

InstallationSupports DIN rail and wall mounting.

DIP switch settingSelects the SFP port speed from the DIP switch on the unit.

Fault warningCloses the relay contact and lights the fault LED on a power failure.

ORing Switch Model

IGPS-1042GPA

Physical Ports

10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E

100/1000Base-X SFP Port

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification

MAC Table

1024

Packet Buffer

1M bits

Processing

Store-and-Forward

Jumbo Frame

10240 Bytes

Switch Properties

Switching latency: 7 us
Switching bandwidth: 12 Gbps
Throughput (packet per second): 8.688 Mpps@64Bytes packet

LED Indicators

Power Indicator (PWR)

Green: Power LED x 2

Fault Indicator

Amber: Indicates PWR1 or PWR2 failure

10/100/1000Base-T(X) RJ45 Port Indicator

Upper LED for Link/Act indicator: Green for port Link/Act
Lower LED for PoE indicator: Green for PoE power enable

100/1000Base-X SFP Port Indicator

Green: Port Link/Act

DIP Switch for SFP Port Speed

DIP switch 1 (SFP Port 6)

ON: 100 Mbps, OFF: 1000 Mbps (default)

DIP switch 2 (SFP Port 5)

ON: 100 Mbps, OFF: 1000 Mbps (default)

DIP Switch for Power Fail Alarm

DIP switch 1

Power 1 fail warning: ON for enable, OFF for disable

DIP switch 2

Power 2 fail warning: ON for enable, OFF for disable

Fault Contact

Relay

Relay output to carry capacity of 1 A at 24 VDC

Power

Redundant Input Power

Dual 50~57 VDC on 6-pin terminal block

Power Consumption (Typ.)

<6.5 Watts, 0.13-0.11 A

PoE Power Budget

120 W max., 30 W per port

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristic

Enclosure

IP-30 Metal

Dimension (W x D x H)

26.1 (W) x 94.9 (D) x 144.3 (H) mm
1.03 (W) x 3.74 (D) x 5.68 (H) inch

Weight

458 g

Hardware Version

V5.0

Environmental

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity

5% to 95% non-condensing

Regulatory Approvals

EMC

CE EMC (EN 55024, EN 55032), FCC Part 15 B

EMI

EN 55032, CISPR 32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B Class A

EMS

EN 55024 (IEC/EN 61000-4-2 (ESD: Contact 4 KV, Air 8 KV), IEC/EN 61000-4-3 (RS: 3 V), IEC/EN 61000-4-4 (EFT Power 0.5 KV, Signal 0.5 KV), IEC/EN 61000-4-5 (Surge: Power 0.5 KV, Signal 1 KV), IEC/EN 61000-4-6 (CS: 3 V), IEC/EN 61000-4-8 (PFMF), IEC/EN 61000-4-11 (DIP))

Shock

IEC60068-2-27

Free Fall

IEC60068-2-31

Vibration

IEC60068-2-6

Safety

EN 60950-1 (LVD)

MTBF

910,925 hrs

Warranty

5 years

PoE PIN Definition

10/100Base-T(X) P.S.E RJ-45 Port

PIN No.	Description
#1	TD+ with PoE Power input +
#2	TD+ with PoE Power input +
#3	RD+ with PoE Power input -
#6	RD+ with PoE Power input -

1000Base-T(X) P.S.E RJ-45 Port

PIN No.	Description
#1	BI_DA+ with PoE Power input +
#2	BI_DA- with PoE Power input +
#3	BI_DB+ with PoE Power input -
#4	BI_DC+
#5	BI_DC-
#6	BI_DB- with PoE Power input -
#7	BI_DD+
#8	BI_DD-

Ordering Information

Model Name

IGPS-1042GPA

Description

Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4 x 10/100/1000Base-T(X) P.S.E and 2 x 100/1000Base-X SFP socket

Packing List

IGPS-1042GPA x 1
DIN-Rail Kit x 1
Wall-mount Kit x 2
Quick Installation Guide x 1

Optional Accessories

DR/SDR/DRP Series DIN-Rail power supply

Powers cameras and access points over the data cable.

410/100/1000Base-T(X) PoE+ ports

2100/1000Base-X SFP ports

120 WTotal PoE power budget

30 WPoE power per port

-40 to +75 °COperating Temperature

IP-30Protection Grade

Key features

30W

IEEE 802.3at PoE+

Every copper port powers a camera or an access point.

12Gbps

Switching Capacity

Carries all ports at full speed at the same time.

10240bytes

Jumbo frame

Moves large data blocks in a single frame.

50~57VDC

Dual power input

The second source keeps the supply up when the first one drops.

6.5W

Own power draw

Apart from the PoE output, the unit itself draws little power.

458g

Slim metal housing

The IP-30 body fits into narrow cabinets.

IN DAILY USE

InstallationSupports DIN rail and wall mounting.

DIP switch settingSelects the SFP port speed from the DIP switch on the unit.

Fault warningCloses the relay contact and lights the fault LED on a power failure.

ORing Switch Model

IGPS-1042GPA

Physical Ports

10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E

100/1000Base-X SFP Port

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification

MAC Table

1024

Packet Buffer

1M bits

Processing

Store-and-Forward

Jumbo Frame

10240 Bytes

Switch Properties

Switching latency: 7 us
Switching bandwidth: 12 Gbps
Throughput (packet per second): 8.688 Mpps@64Bytes packet

LED Indicators

Power Indicator (PWR)

Green: Power LED x 2

Fault Indicator

Amber: Indicates PWR1 or PWR2 failure

10/100/1000Base-T(X) RJ45 Port Indicator

Upper LED for Link/Act indicator: Green for port Link/Act
Lower LED for PoE indicator: Green for PoE power enable

100/1000Base-X SFP Port Indicator

Green: Port Link/Act

DIP Switch for SFP Port Speed

DIP switch 1 (SFP Port 6)

ON: 100 Mbps, OFF: 1000 Mbps (default)

DIP switch 2 (SFP Port 5)

ON: 100 Mbps, OFF: 1000 Mbps (default)

DIP Switch for Power Fail Alarm

DIP switch 1

Power 1 fail warning: ON for enable, OFF for disable

DIP switch 2

Power 2 fail warning: ON for enable, OFF for disable

Fault Contact

Relay

Relay output to carry capacity of 1 A at 24 VDC

Power

Redundant Input Power

Dual 50~57 VDC on 6-pin terminal block

Power Consumption (Typ.)

<6.5 Watts, 0.13-0.11 A

PoE Power Budget

120 W max., 30 W per port

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristic

Enclosure

IP-30 Metal

Dimension (W x D x H)

26.1 (W) x 94.9 (D) x 144.3 (H) mm
1.03 (W) x 3.74 (D) x 5.68 (H) inch

Weight

458 g

Hardware Version

V5.0

Environmental

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity

5% to 95% non-condensing

Regulatory Approvals

EMC

CE EMC (EN 55024, EN 55032), FCC Part 15 B

EMI

EN 55032, CISPR 32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B Class A

EMS

Shock

IEC60068-2-27

Free Fall

IEC60068-2-31

Vibration

IEC60068-2-6

Safety

EN 60950-1 (LVD)

MTBF

910,925 hrs

Warranty

5 years

PoE PIN Definition

10/100Base-T(X) P.S.E RJ-45 Port

PIN No.	Description
#1	TD+ with PoE Power input +
#2	TD+ with PoE Power input +
#3	RD+ with PoE Power input -
#6	RD+ with PoE Power input -

1000Base-T(X) P.S.E RJ-45 Port

PIN No.	Description
#1	BI_DA+ with PoE Power input +
#2	BI_DA- with PoE Power input +
#3	BI_DB+ with PoE Power input -
#4	BI_DC+
#5	BI_DC-
#6	BI_DB- with PoE Power input -
#7	BI_DD+
#8	BI_DD-

Ordering Information

Model Name

IGPS-1042GPA

Description

Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4 x 10/100/1000Base-T(X) P.S.E and 2 x 100/1000Base-X SFP socket

Packing List

IGPS-1042GPA x 1
DIN-Rail Kit x 1
Wall-mount Kit x 2
Quick Installation Guide x 1

Optional Accessories

DR/SDR/DRP Series DIN-Rail power supply

Slim Type 4 x 10/100/1000TX (RJ-45) PoE+, + 2 x 100/1000Base-X SFP slot

Datasheet

IGPS-1042GPA

Similar Products

8 Port 10/100Mbps PoE + 2 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

8 Port 10/100Mbps PoE + 1 Port Gigabit TX + 1 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

4-Port PoE Switch (Unmanaged)

4-Port PoE Switch (Unmanaged)

Slim Type 4 x 10/100/1000TX (RJ-45) PoE+, + 2 x 100/1000Base-X SFP slot

Datasheet

IGPS-1042GPA

Similar Products

8 Port 10/100Mbps PoE + 2 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

8 Port 10/100Mbps PoE + 1 Port Gigabit TX + 1 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

4-Port PoE Switch (Unmanaged)

4-Port PoE Switch (Unmanaged)