
Stock Code: WNAP-6335







| Hardware Features | |
|---|---|
| Supported Standards | IEEE 802.11b/g/n IEEE 802.3 IEEE 802.3u IEEE 802.3x |
| Memory | 64 Mbytes DDR SDRAM 16 Mbytes Flash |
| PoE | Passive PoE |
| Interface | Wireless IEEE 802.11b/g/n, 2T2R PoE LAN (LAN 1): 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE LAN 2: 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE pass-through |
| Antenna | Built-in RP-SMA antenna connectors |
| Wireless RF Features | |
| Wireless Technology | IEEE 802.11b/g IEEE 802.11n |
| Data Rate | IEEE 802.11b: 1, 2, 5.5, 11Mbps IEEE 802.11g: up to 54Mbps IEEE 802.11n (20MHz): up to 150Mbps IEEE 802.11n (40MHz): up to 300Mbps |
| Media Access Control | CSMA/CA |
| Modulation | OFDM OFDM with BPSK, QPSK, 16-QAM, 64-QAM |
| Frequency Band | 2.412GHz ~ 2.484GHz |
| Operating Channels | America/ FCC: 2.414~2.462GHz (11 Channels) Europe/ ETSI: 2.412~2.472GHz (13 Channels) Japan/ TELEC: 2.412~2.484GHz (14 Channels) |
| RF Output Power (Max.) | IEEE 802.11b: up to 26 ± 1dBm IEEE 802.11g: up to 23 ± 1dBm IEEE 802.11n: up to 22 ± 1dBm |
| Receiver Sensitivity (dBm) | IEEE 802.11b: -94dBm IEEE 802.11g: -91dBm IEEE 802.11n: -89dBm |
| Output Power Control | 12~27dBm |
| Software Features | |
| LAN | Built-in DHCP server supporting static IP address distribution Supports 802.1d STP (Spanning Tree) |
| WAN | ■ Static IP ■ Dynamic IP ■ PPPoE |
| Operating Mode | ■ Bridge ■ WISP |
| Firewall | NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting virtual server and DMZ Built-in firewall with port/ IP address/ MAC/ URL filtering |
| Wireless Mode | ■ AP/ Router ■ Client ■ WDS PTP ■ WDS PTMP ■ WISP |
| Channel Width | 20MHz / 40MHz |
| Wireless Isolation | Isolates each connected wireless client so they cannot access each other |
| Encryption Type | 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x |
| Wireless Security | Wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering Enable/Disable SSID Broadcast |
| Max. Wireless Clients | 25 |
| Max. WDS APs | 8 |
| Max. Wired Clients | 60 |
| WMM | Supports Wi-Fi multimedia |
| QoS | Supports Quality of Service for bandwidth management |
| NTP | Network Time Management |
| Self Healing | Schedule can be created for device self-reboot |
| Management | Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS and SNMP |
| Diagnostic Tools | System Log, Ping Watchdog |
| Mechanical Features and Power Values | |
| IP Level | IP55 |
| Material | Outdoor UV-resistant stable enclosure |
| Dimensions (W x D x H) | 127 x 63 x 254 mm |
| Weight | 366g |
| Installation | Pole mounting or wall mounting |
| Power Requirements | LAN1 ■ 24V DC, 1A/ Passive PoE ■ Pin 4,5 V DC+ ■ Pin 7,8 V DC- ■ Pin 3 Reset |
| Power Consumption | 12W |
| Environmental Features and Certification | |
| Operating Temperature | -20~70°C |
| Operating Humidity | 10~95% non-condensing |
| Regulatory | CE, FCC, RoHS |




