
Stock Code: WNAP-1260
| Interface | |
|---|---|
| LAN/WAN | 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port |
| Antenna Gain | 2 x Internal 2dBi Antenna Orientation: Horizontal and Vertical |
| Button / Switch | Mode Selection Switch (AP / Repeater / Client) WPS Button Reset button *Push about 3~6 seconds to reset to factory default settings |
| LED Indicators | PWR, WPS, Ethernet, WLAN |
| Material | Plastic |
| Dimensions (W x D x H) | 55 x 75 x 40 mm |
| Weight | 80g (gross weight) |
| Power Requirements | 100~240VAC |
| Plug Type | EU/US |
| Power Consumption | On-state: 2.1W Low power state: 1.5W |
| Wireless Interface Specifications | |
| Standard | Compliant with IEEE 802.11b/g/n |
| Frequency Band | 2.4~2.4835GHz |
| Modulation Type | DSSS DBPSK, DQPSK, QPSK, CCK and OFDM (BPSK / QPSK / 16-QAM / 64-QAM) |
| Data Transmission Rates | 802.11n (40MHz): 270/243/216/162/108/81/54/27Mbps 135/121.5/108/81/54/40.5/27/13.5Mbps (Dynamic) 802.11n (20MHz): 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps (Dynamic) 802.11g: 54/48/36/24/18/12/9/6Mbps (Dynamic) 802.11b: 11/5.5/2/1Mbps (Dynamic) |
| Transmission Distance | Indoor up to 100m Outdoor up to 300m (Depends on the environment) |
| Channel | America / FCC: 2.412~2.462GHz (11 Channels) Europe / ETSI: 2.412~2.472GHz (13 Channels) Japan / TELEC: 2.412~2.484GHz (14 Channels) |
| Channel Width | 20 / 40MHz |
| Max. RF Power | 802.11b: 17 ±1.5dBm 802.11g: 14 ±1.5dBm 802.11n (20MHz): 14 ±1.5dBm 802.11n (40MHz): 14 ±1.5dBm |
| Receive Sensitivity | 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8% 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER < 10% 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER < 10% |
| Software Features | |
| Operation Mode | AP/Router Repeater Client (Switchable by Hardware) |
| Wireless Mode | Universal Repeater (AP+Client) Repeater (WDS+AP) AP (Access Point) WDS PTP (Point to Point) WDS PTMP (Point to Multipoint) Client |
| Encryption Security | WEP (64/128-bit) encryption security WPA / WPA2 (TKIP/AES) WPA-PSK / WPA2-PSK (TKIP/AES) |
| Wireless Security | Provides wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering up to 16 entries Supports WPS (Wi-Fi Protected Setup) Enable/Disable SSID Broadcast |
| Wireless Advanced | WMM (Wi-Fi Multimedia): 802.11e Wireless QoS Multiple SSID: up to 4 Wireless Isolation: Supports Wireless Isolation IAPP (Inter Access Point Protocol): 802.11f Wireless Roaming Provides Wireless Statistics |
| Max. Clients | Wire: 253 Wireless: 32 |
| Internet Connection Type | Shares data and Internet access for users, supporting the following internet access: Dynamic IP Static IP PPPoE PPTP L2TP |
| Firewall | NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Port Forwarding, Port Triggering, and DMZ Built-in firewall with IP address / MAC address / Port / URL filtering Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection |
| Routing Protocol | Static Routing |
| VPN Pass-through | SIP ALG, PPTP, L2TP, IPSec |
| LAN | Built-in DHCP server supporting static IP address distributing Supports UPnP, Dynamic DNS Supports IGMP Proxy |
| System Management | Web-based (HTTP) management interface SNTP time synchronize Easy firmware upgrade |
| Standards Conformance | |
| IEEE Standards | IEEE 802.11n (2T2R, up to 300Mbps) IEEE 802.11g IEEE 802.11b IEEE 802.11i IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control |
| Other Protocols and Standards | CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP |
| Environment & Certification | |
| Temperature | Operating: 0 ~ 45 degrees C Storage: -20 ~ 70 degrees C |
| Humidity | Operating: 10 ~ 90% (non-condensing) Storage: 5 ~ 90% (non-condensing) |
| Regulatory | CE, RoHS |




