| Network Specifications |
|---|
| Fiber Ports | 4*1G/1.25G/155M SFP slot type, OS1/OS2 ≤120km; OM1/OM2 ≤550m |
| Port Features | • IEEE 802.3x Flow Control • Interface Counters • Storm Control |
| MAC Address Table | • Dynamic MAC Address • Secure MAC Address |
| VLAN | • 4094 VLAN • MAC |
| Diagnostics |
|---|
| LED Indicators | PWR,RUN,Speed,Link/Act |
| Power Supply |
|---|
| Power Port | Terminal Block |
| Power Consumption | ≤250W (fully loaded) |
| Dimensions and Weight |
|---|
| Dimensions | 170x120x60mm |
| Environmental Conditions |
|---|
| Operating Temperature | -40°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Relative Humidity | 10-95% (non-condensing) |
| Other Specifications |
|---|
| Standard | • IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z • IEEE802.3x, IEEE802.1Q, IEEE802.1w,IEEE802.1s,IEEE802.1p |
| Processing Type | Store and Forward |
| Switch Architecture | 55 Gbps / non blocking |
| Packet Forwarding Rate | 17.58Mpps |
| MAC Address | 8k |
| Buffer Memory | 4M |
| Jumbo Frame | 9.6k |
| Copper Ports | • 8*10/100/1000M Auto-negotiation, RJ45 Auto-Cross • MDI/MDIX Cat5e/Cat6/Cat6a, ≤100m |
| Console Ports | RS232 (RJ45) |
| Reset | Reset Switch |
| Relay | Normally Open (alarm relay) |
| Standard | IEEE802.3af-at |
| Pin Assignment | 1/2(+), 3/6(-) |
| PoE Budget | ≤240W |
| Input Voltage | 48-58VDC |
| Input Current | 4.9A@52VDC |
| Protection | IP40, Aluminum Alloy, fanless |
| Installation | DIN Rail, Wall Mount |
| Link Aggregation | • Dynamic Aggregation (LACP) • Static Aggregation |
| Mirroring | • Port-based Mirroring • VLAN-based • IVL Mode • Flow-based |
| Spanning Tree Control | • IEEE802.1d STP • IEEE802.1w RSTP • IEEE802.1s MSTP |
| QinQ | • VLAN-based QinQ • 1:1 VLAN Mapping |
| LLDP | • LLDP • LLDP-MED |
| Loop Protection | • Supported • Single ring, sub-ring, multiple rings |
| ERPS (G.8032) | • Load Balancing • Recovery Time < 50ms |