Carries power to IEEE 802.3af devices over the network cable.
It converts the 100 ~ 240 VAC mains input into a 48-52 VDC PoE output and delivers 24 W of rated power. It passes the data link through the 10/100T RJ-45 interface and carries power on pins 4-5 and 7-8.
Cable supportIt runs up to 100 m over EIA/TIA-568 100-ohm cable and accepts Cat.3, 4 and 5 for 10T and Cat.5 for 100TX.
ProtectionIt carries short-circuit and overload protection; overload protection trips at 145~160% of the peak value and recovers once the fault clears.
Input connectionIt runs from an IEC320-C6 (3-pin) inlet and accepts a 47~63 Hz mains frequency.
IndicatorA green status LED shows that AC power has arrived.
ComplianceIt meets the CE and EN60950 safety standards, follows the EN55022 and EN55024 EMC requirements and is RoHS compliant.
