Carries a 50 Ω coaxial line through tight spaces.
A thin, flexible 50 Ω coaxial cable with a 2.80 mm outer diameter. A 7/34 AWG stranded copper inner conductor and an 88 % tinned copper braid carry the signal inside a black PVC jacket.
50 Ωimpedance
2.80 mmouter diameter
67 %velocity of propagation
7/34 AWGinner conductor
28.0 mmmin. bend radius
13 kg/kmweight
Key features
0.48mm
Inner conductor diameter
The 7/34 AWG stranded copper wire leaves the cable room to bend.
1.52mm
Dielectric diameter
Solid polyethylene insulation holds the spacing between conductor and shield.
88%
Braid coverage
A 38 AWG tinned copper braid wraps the inner conductor.
2.80mm
Outer diameter
The black PVC jacket finishes the cable thin enough for tight ducts.
101.0nF/km
Nominal capacitance
Long line calculations use this nominal figure.
28.0mm
Minimum bend radius
The cable stays above this radius during installation.
EVERYDAY USEWorks in tight spacesThe thin jacket and small bend radius allow winding runs inside ducts and equipment.
Attenuation shifts with temperatureAttenuation climbs with rising temperature and falls as it drops, so link budgets in hot areas account for the change.
Tinned copper braidThe braid shield separates the line from outside interference and protects the inner conductor.
Attenuation figures are nominal and change with temperature, rising 0.18 % per °C.
