Three shield layers keep the coaxial run clear of outside interference.
A three shield Series 6 coaxial cable that runs at 75 ± 3 Ω impedance. A copper clad steel inner conductor, a foamed polyethylene dielectric and a white PVC outer jacket form a single body.
75 ± 3 ΩImpedance
82%Velocity of Propagation
53.2 pF/mCapacitance
21.7 Ω/kmInner Conductor DC Resistance
7.06 mmOuter Jacket Diameter
40.0 kg/kmWeight Without Reel
Key features
3layers
Three shield construction
AP tape, a 77% aluminum braid and a second AP tape suppress outside interference.
75Ω
Impedance match
Holds the Series 6 system impedance within a ±3 Ω tolerance.
82%
Velocity of propagation
The foamed polyethylene dielectric holds the nominal velocity at this level.
21.98dB/100 m
Attenuation at 1000 MHz
Attenuation climbs from 2.66 dB/100 m at 5 MHz to this value at 1000 MHz.
25.4mm
Minimum bend radius
The cable stays above this radius through corners and conduit runs.
40.0kg/km
Weight without reel
Sets the handling and support load on long pulls.
IN DAILY USEWhite PVC jacketThe white outer jacket blends with walls and trunking on indoor runs.
Attenuation shifts with temperatureLoss grows 0.18% per °C as temperature climbs and drops at the same rate as it falls.
Listing informationThe manufacturer sheet shows no NEC or CSA listing.
Attenuation figures apply at a 20 °C ambient temperature.
