Carries copper ports onto multi-mode fiber up to two kilometers.

It carries 6 10/100Base-T(X) ports and 2 100Base-FX multi-mode fiber ports; the fiber ends use SC connectors. It operates between -40 and 75 °C in an IP-30 aluminum housing.

610/100Base-T(X) RJ45 ports

2100Base-FX fiber ports (SC)

1.6 GbpsSwitching Capacity

-40 to +75 °COperating Temperature

IP-30Protection Grade

Key features

2km

Typical fiber distance

The 100Base-FX link with SC connectors joins two buildings.

1310nm

Optical wavelength

Works on 62.5/125 and 50/125 µm multi-mode fiber.

7.5dB

Link budget

Shows the upper limit of total optical loss on the link.

2.03µs

Switching latency

Forwards a packet between ports on a microsecond scale.

30ms

O-Ring recovery time

Rebuilds the broken path on a ring of up to 250 connections.

12~48VDC

Triple redundant power

The backup input takes over when the primary input drops.

IN DAILY USE

Central managementSupports web interface, Telnet, console CLI and the Open-Vision utility.

Port securityLocks the port against unauthorized MAC addresses and runs 802.1x user authentication.

Fault notificationTriggers the relay output and writes the event to the Syslog server and to email.

Usage AreasFiber Ethernet backbone links·Industrial automation networks

Physical Ports
100Base-FX Fiber Ports	2
10/100Base-T(X) Ports in RJ45 (Auto MDI/MDI-X)	6
RS-232 Serial Console Port	RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
LED Indicators
100Base-FX Fiber port Indicator	Green for port Link/Act. indicator: on for link-up, off for link-down, Blinking for act. Amber for port link indicator: on for link-up, off for link-down.
Power Indicator (Power)	Green: Power LED x 3
Ring Master Indicator (R.M.)	Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)	Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault)	Amber: Indicate unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator	Green for Link/Act indicator: on for link-up, off for link-down, Blinking for act. Amber for Duplex/Collision indicator: on for full-duplex, off for half-duplex, blinking for half-duplex and collision occurred.
Power
Power Consumption (Typ.)	9 Watts
Redundant Input Power	Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristic
Enclosure	IP-30 Aluminum
Dimension (W x D x H)	54.2 (W) x 107.1 (D) x 145.4 (H) mm 2.13 (W) x 4.22 (D) x 5.72 (H) inch
Weight (g)	735 g
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table	8K
Packet Buffer Size	1Mbits
Priority Queues	4
Processing	Store-and-Forward
Switch Properties	Switching latency: 2.03 µs Switching bandwidth: 1.6Gbps Throughput: 1.19Mpps@64Bytes packet Max. Number of Available VLANs: 4096 VLAN ID Range: VID 1 to 4095 IGMP multicast groups: 1024 Port rate limiting: User Define
Security Features	Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand the VLAN space Radius centralized password management SNMP V1/V2c/V3 encrypted authentication and access security
Software Features	STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support Modbus TCP
Network Redundancy	O-Ring O-Chain MRP MSTP/RSTP/STP
Fault Contact
Warning / Monitoring System	Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support
Relay	Relay output to carry capacity of 1A at 24VDC
Fiber Ports
Fiber Ports Standard	100Base-FX
Fiber Mode	Multi-mode
Fiber Diameter (µm)	62.5/125 µm, 50/125 µm
Fiber Optical Connector	SC
Typical Distance (km)	2 km
Wavelength (nm)	1310 nm
Max. Output Optical Power (dBm)	-14 dBm
Min. Output Optical Power (dBm)	-23.5 dBm
Max. Input Optical Power (Saturation) (dBm)	0 dBm
Min. Input Optical Power (Saturation) (dBm)	-31 dBm
Link Budget (dB)	7.5 dB
Reset Function
Reset Button	5 sec: Factory default
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 75°C (-40 to 167°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
Safety	EN 62368-1 (LVD), UL 61010-1, UL 61010-2-201
MTBF	550,165 hrs.
Warranty	5 years

Physical Ports

100Base-FX Fiber Ports

10/100Base-T(X) Ports in RJ45 (Auto MDI/MDI-X)

RS-232 Serial Console Port

RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1

LED Indicators

100Base-FX Fiber port Indicator

Green for port Link/Act. indicator: on for link-up, off for link-down, Blinking for act.
Amber for port link indicator: on for link-up, off for link-down.

Power Indicator (Power)

Green: Power LED x 3

Ring Master Indicator (R.M.)

Green: Indicates that the system is operating in O-Ring Master mode

O-Ring Indicator (Ring)

Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.

Fault Indicator (Fault)

Amber: Indicate unexpected event occurred

10/100Base-T(X) RJ45 Port Indicator

Green for Link/Act indicator: on for link-up, off for link-down, Blinking for act.
Amber for Duplex/Collision indicator: on for full-duplex, off for half-duplex, blinking for half-duplex and collision occurred.

Power

Power Consumption (Typ.)

9 Watts

Redundant Input Power

Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack

Overload Current Protection

Present

Reverse Polarity Protection

Present on terminal block

Physical Characteristic

Enclosure

IP-30 Aluminum

Dimension (W x D x H)

54.2 (W) x 107.1 (D) x 145.4 (H) mm
2.13 (W) x 4.22 (D) x 5.72 (H) inch

Weight (g)

735 g

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table

Packet Buffer Size

1Mbits

Priority Queues

Processing

Store-and-Forward

Switch Properties

Switching latency: 2.03 µs
Switching bandwidth: 1.6Gbps
Throughput: 1.19Mpps@64Bytes packet
Max. Number of Available VLANs: 4096
VLAN ID Range: VID 1 to 4095
IGMP multicast groups: 1024
Port rate limiting: User Define

Security Features

Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP V1/V2c/V3 encrypted authentication and access security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP

Network Redundancy

O-Ring
O-Chain
MRP
MSTP/RSTP/STP

Fault Contact

Warning / Monitoring System

Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support

Relay

Relay output to carry capacity of 1A at 24VDC

Fiber Ports

Fiber Ports Standard

100Base-FX

Fiber Mode

Multi-mode

Fiber Diameter (µm)

62.5/125 µm, 50/125 µm

Fiber Optical Connector

Typical Distance (km)

2 km

Wavelength (nm)

1310 nm

Max. Output Optical Power (dBm)

-14 dBm

Min. Output Optical Power (dBm)

-23.5 dBm

Max. Input Optical Power (Saturation) (dBm)

0 dBm

Min. Input Optical Power (Saturation) (dBm)

-31 dBm

Link Budget (dB)

7.5 dB

Reset Function

Reset Button

5 sec: Factory default

Environmental

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Temperature

-40 to 75°C (-40 to 167°F)

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

Safety

EN 62368-1 (LVD), UL 61010-1, UL 61010-2-201

MTBF

550,165 hrs.

Warranty

5 years

Rugged 6x 10/100TX RJ-45 + 2x 100/1000FX MM 2km SC Managed Switch

Datasheet

IES-3062FX-MM-SC

Similar Products

L2 Managed 12 Port Gigabit + 4 Port Gigabit SFP Managed Industrial Switch

L2 Managed 8 Port Gigabit + 4 Port Gigabit SFP Managed Industrial Switch

L2 Managed 8 Port Gigabit + 2 Port Gigabit SFP Managed Industrial Switch

L2 Managed 4 Port Gigabit + 2 Port Gigabit SFP Managed Industrial Switch