Converts between IDE and SATA interfaces in both directions.
The SATA to IDE converter turns an ATA/ATAPI interface into SATA and a SATA interface into ATA/ATAPI. It fully complies with the Serial ATA specifications and supports large HDD capacities and ATA hot swap.
Two-way conversionTurns an ATA/ATAPI interface into SATA and a SATA interface into ATA/ATAPI.
CompatibilityWorks with the Serial ATA specifications, ATA/ATAPI-7, ATA 100/133 and SATA 1.0.
Port layoutCarries 1 x 40-pin IDE port, 2 x Serial ATA 2 ports and 1 x 4-pin power connector.
Drive supportSupports large HDD capacities and the ATA hot-swap feature.
Power and signalDraws low power and supports Spread Spectrum on the receiver side.
