Four PoE ports and a fiber uplink meet in one narrow housing.

The unmanaged PoE switch delivers up to 30 W per port to the 802.3af/at standard and links copper access to a fiber backbone through a 100/1000Base-X SFP slot. At 26.1 mm wide, the IP-30 enclosure takes little room on a crowded DIN-Rail.

4 + 1 + 1Port Count

10/100/1000Base-T(X)Link Speed

120 WPoE Power Budget

50 ~ 57 VDCInput Power

IP-30Protection Grade

Key features

4PoE ports

802.3af/at power sourcing

4 copper ports deliver up to 30 W of P.S.E. power each.

1SFP

Fiber uplink slot

The SFP slot links to a fiber backbone where copper distance falls short.

100 / 1000Mbps

SFP speed by DIP switch

With both DIP switches on the SFP runs at 100 Mbps, with both off at 1000 Mbps.

120W

PoE power budget

The four PoE ports share the total budget.

50 ~ 57VDC

Redundant power input

Dual DC inputs on the 6-pin terminal block keep the supply running when one source fails.

26.1mm

Narrow housing

At 26.1 mm wide, the case takes a single DIN-Rail slot in a crowded cabinet.

IN DAILY USE

Single-cable installationRemote devices take data and power from the same twisted-pair cable, so no separate supply line is needed.

Copper to fiberOne enclosure carries both copper access and the fiber uplink, which removes the need for a separate converter.

Power warningThe DIP switches turn on the PWR-1 and PWR-2 warnings, and the relay output reports a fault to the cabinet side.

Usage AreasIndustrial PoE installations·Field cabinets with fiber uplink·Remote device powering

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 with P.S.E., Auto MDI/MDIX	4
10/100/1000Base-T(X) Port in RJ45, Auto MDI/MDIX	1
100/1000Base-X SFP Socket	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3af / 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table	1K MAC addresses
Processing	Store-and-Forward
Jumbo Frame	Up to 10 KBytes
LED Indicators
Power Indicator	Green: Power LED × 2
Fault Indicator	Amber: indicates PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 Port and PoE Indicator (P1 ~ P4)	Green: port Link/Act Green: power injected
10/100/1000Base-T(X) RJ45 Port Indicator (P5)	Green: port Link/Act Amber: 100 Mbps indicator
100/1000Base-X SFP Port Indicator	Green: port Link/Act
SFP Speed DIP-Switch
DIP-Switch 1/2	DIP-Switch 1 (ON) and DIP-Switch 2 (ON): SFP speed setting to 100 Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF): SFP speed setting to 1000 Mbps
DIP-Switch
DIP-Switch 1	Power-1 failed warning: (ON) enable, (OFF) disable
DIP-Switch 2	Power-2 failed warning: (ON) enable, (OFF) disable
Fault Contact
Relay	Relay output to carry capacity of 1 A at 24 VDC
Power
Redundant Input Power	Dual DC inputs, 50~57 VDC on 6-pin terminal block
Power Consumption (Typ.)	6.2 Watts (powered device not included)
PoE Power Budget	120 W
Overload Current Protection	Present
Reverse Polarity Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W × D × H)	26.1 (W) × 94.9 (D) × 144.3 (H) mm (1.03 × 3.74 × 5.68 inches)
Weight	458 g
Environmental
Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
Operating Temperature	-40 °C to 75 °C (-40 °F to 167 °F)
Operating Humidity	5% to 95% non-condensing
Regulatory Approvals
EMC	EN 55032, EN 55024 (CE EMC), FCC Part 15 B, EN 61000-3-2, EN 61000-3-3
EMI	CISPR 32, EN 55032, FCC Part 15 B Class A, C-Tick
EMS	IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)
Shock	IEC 60068-2-27
Free Fall	IEC 60068-2-31
Vibration	IEC 60068-2-6
Safety	IEC 60950-1, UL 60950-1, EN 60950-1
Other	IEC 60945, EN 60945
MTBF	916,635 hours
Warranty	5 years

Physical Ports

10/100/1000Base-T(X) Ports in RJ45 with P.S.E., Auto MDI/MDIX

10/100/1000Base-T(X) Port in RJ45, Auto MDI/MDIX

100/1000Base-X SFP Socket

Technology

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3af / 802.3at PoE specification (up to 30 Watts per port for P.S.E.)

MAC Table

1K MAC addresses

Processing

Store-and-Forward

Jumbo Frame

Up to 10 KBytes

LED Indicators

Power Indicator

Green: Power LED × 2

Fault Indicator

Amber: indicates PWR1 or PWR2 failure

10/100/1000Base-T(X) RJ45 Port and PoE Indicator (P1 ~ P4)

Green: port Link/Act
Green: power injected

10/100/1000Base-T(X) RJ45 Port Indicator (P5)

Green: port Link/Act
Amber: 100 Mbps indicator

100/1000Base-X SFP Port Indicator

Green: port Link/Act

SFP Speed DIP-Switch

DIP-Switch 1/2

DIP-Switch 1 (ON) and DIP-Switch 2 (ON): SFP speed setting to 100 Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF): SFP speed setting to 1000 Mbps

DIP-Switch

DIP-Switch 1

Power-1 failed warning: (ON) enable, (OFF) disable

DIP-Switch 2

Power-2 failed warning: (ON) enable, (OFF) disable

Fault Contact

Relay

Relay output to carry capacity of 1 A at 24 VDC

Power

Redundant Input Power

Dual DC inputs, 50~57 VDC on 6-pin terminal block

Power Consumption (Typ.)

6.2 Watts (powered device not included)

PoE Power Budget

120 W

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics

Enclosure

IP-30

Dimensions (W × D × H)

26.1 (W) × 94.9 (D) × 144.3 (H) mm (1.03 × 3.74 × 5.68 inches)

Weight

458 g

Environmental

Storage Temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating Temperature

-40 °C to 75 °C (-40 °F to 167 °F)

Operating Humidity

5% to 95% non-condensing

Regulatory Approvals

EMC

EN 55032, EN 55024 (CE EMC), FCC Part 15 B, EN 61000-3-2, EN 61000-3-3

EMI

CISPR 32, EN 55032, FCC Part 15 B Class A, C-Tick

EMS

IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)

Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-31

Vibration

IEC 60068-2-6

Safety

IEC 60950-1, UL 60950-1, EN 60950-1

Other

IEC 60945, EN 60945

MTBF

916,635 hours

Warranty

5 years

Slim Type 4x 10/100/1000TX (RJ-45) PoE+ +1 x 10/100/1000 RJ-45 and 1x 1000Base-X SFP

Datasheet

IGPS-1411GTPA

Similar Products

8 Port 10/100Mbps PoE + 2 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

8 Port 10/100Mbps PoE + 1 Port Gigabit TX + 1 Port Gigabit SFP Unmanaged Industrial DIN-Rail Switch

Slim Type 4 x 10/100/1000TX (RJ-45) PoE+, + 2 x 100/1000Base-X SFP slot

4-Port PoE Switch (Unmanaged)