Controls wide entrances with a left-hand telescopic arm.

The left-hand telescopic arm barrier controls vehicle entrances across a 4–5 m opening. A 24 VDC brushless motor opens and closes the arm in 4.8 seconds, while the digital display on the housing shows error codes and operating status. The metal housing carries an IP54 rating and works outdoors.

LeftArm Direction

4–5 mArm Length

4.8 sOpening / Closing Time

200 WPower Consumption

IP54Protection Grade

-35 °C / +65 °COperating Temperature

Key features

4.8s

Fast cycle on a wide opening

The telescopic arm completes its opening and closing movement within this time, so no queue builds at the entrance.

200W

Low draw from the mains

The brushless DC motor runs on both 220 VAC and 110 VAC supplies, and a DIP switch moves between the two voltages.

9I/O ports

Links to the access system

The RS-485 interface and the I/O connections tie the barrier to card readers, plate recognition and alarm equipment.

30m

Remote control range

The remote works from this distance in an interference-free environment, and 30 remotes pair with the system.

12V

Power for external sensors

The barrier feeds a radar or a loop detector with up to 1 A of current.

DAILY USE

The arm lifts against obstaclesWhen the barrier senses a vehicle touching the arm, it lifts the arm automatically.

Status on the displayThe digital display shows the error code and the operating status, so a technician tells the fault apart on site.

Remote, counting and fleet modeThe remote opens the arm, the counting mode keeps the number of passages, and fleet mode lets consecutive vehicles through.

Usage AreaParking areas·Residential complex entrances·Factories·Public institutions·Hotels

Anti-drop protection and obstacle detection work when an external radar, loop detector or IR sensor is connected.

Technical Specifications (Barrier Gate)

Basic Information and Motor

Arm Type

Straight arm; Telescopic arm; Folding arm; Fence arm (All system standard with anti-smash rubber strip)

Arm Model

IPMECD-015X Series

Motor Type

DC brushless

Operating Voltage (Motor)

24 V DC

Motor Lifespan

3,000,000 cycles

Spring

2 × 4.5 mm (0.18") springs

Spring Lifespan

800,000 cycles

RS-485

I/O

Status Output

2 channels. Outputs signals when the arm is in the open or closed position.

Arm Lengths and Operating Times

Arm Lengths and Opening/Closing Times

Arm Type	Length	Opening/Closing Time
Straight Arm	3 m (9.84 ft)	1.5 s
Telescopic Arm	3–4 m (9.84 ft–13.12 ft) / 4–5 m (13.12 ft–16.40 ft) / 5–6 m (16.40 ft–19.69 ft)	2.8 s / 4.8 s / 5.5 s
Folding Arm	3 m (1.5+1.5) (9.84 ft) / 4 m (1.5+2.5) (13.12 ft) / 5 m (2.5+2.5) (16.40 ft)	2.8 s / 3 s / 5 s
Fence Arm	3 m (9.84 ft) / 3.5 m (11.48 ft) / 4 m (13.12 ft) / 4.5 m (14.76 ft)	3.5 s / 4.2 s / 5.5 s / 6 s

Functions and Control

Anti-drop

Yes, can be realized by connected radar, loop, or IR.

Auto Lifting against Obstruction

Yes

Count Mode

Yes

Hand Crank Control in Power Failure

Yes

Limit Description

Adjustable

Remote Control

Supports remote control at a maximum distance of 30 m (98.43 ft) when there is no interference.

Number of Pairable Remote Controllers

Power and Environmental Conditions

Power Output

12 V ± 5% (1A)

Power Supply

220 VAC ± 10% / 110 VAC ± 10% (can be changed with the DIP switch)

Power Consumption

<200 W

Operating Temperature

–35 °C to +65 °C (–31 °F to +149 °F)

Storage Temperature

–35 °C to +65 °C (–31 °F to +149 °F)

Operating Humidity

10%–90% (RH), non-condensing

Storage Humidity

10%–90%, non-condensing

Protection

IP54

Installation

It can be secured with screws at the bottom.

Dimensions and Weight

Product Dimensions (L×W×H)

335.0 mm × 285.0 mm × 930.0 mm (13.19" × 11.22" × 36.61")

Packaging Dimensions (L×W×H)

1,020.0 mm × 365.0 mm × 470.0 mm (40.16" × 14.37" × 18.50")

Net Weight

40.0 kg (88.18 lb)

Gross Weight

45.0 kg (99.21 lb)

Controls wide entrances with a left-hand telescopic arm.

LeftArm Direction

4–5 mArm Length

4.8 sOpening / Closing Time

200 WPower Consumption

IP54Protection Grade

-35 °C / +65 °COperating Temperature

Key features

4.8s

Fast cycle on a wide opening

The telescopic arm completes its opening and closing movement within this time, so no queue builds at the entrance.

200W

Low draw from the mains

The brushless DC motor runs on both 220 VAC and 110 VAC supplies, and a DIP switch moves between the two voltages.

9I/O ports

Links to the access system

The RS-485 interface and the I/O connections tie the barrier to card readers, plate recognition and alarm equipment.

30m

Remote control range

The remote works from this distance in an interference-free environment, and 30 remotes pair with the system.

12V

Power for external sensors

The barrier feeds a radar or a loop detector with up to 1 A of current.

DAILY USE

The arm lifts against obstaclesWhen the barrier senses a vehicle touching the arm, it lifts the arm automatically.

Status on the displayThe digital display shows the error code and the operating status, so a technician tells the fault apart on site.

Remote, counting and fleet modeThe remote opens the arm, the counting mode keeps the number of passages, and fleet mode lets consecutive vehicles through.

Usage AreaParking areas·Residential complex entrances·Factories·Public institutions·Hotels

Anti-drop protection and obstacle detection work when an external radar, loop detector or IR sensor is connected.

Technical Specifications (Barrier Gate)

Basic Information and Motor

Arm Type

Straight arm; Telescopic arm; Folding arm; Fence arm (All system standard with anti-smash rubber strip)

Arm Model

IPMECD-015X Series

Motor Type

DC brushless

Operating Voltage (Motor)

24 V DC

Motor Lifespan

3,000,000 cycles

Spring

2 × 4.5 mm (0.18") springs

Spring Lifespan

800,000 cycles

RS-485

I/O

Status Output

2 channels. Outputs signals when the arm is in the open or closed position.

Arm Lengths and Operating Times

Arm Lengths and Opening/Closing Times

Arm Type	Length	Opening/Closing Time
Straight Arm	3 m (9.84 ft)	1.5 s
Telescopic Arm	3–4 m (9.84 ft–13.12 ft) / 4–5 m (13.12 ft–16.40 ft) / 5–6 m (16.40 ft–19.69 ft)	2.8 s / 4.8 s / 5.5 s
Folding Arm	3 m (1.5+1.5) (9.84 ft) / 4 m (1.5+2.5) (13.12 ft) / 5 m (2.5+2.5) (16.40 ft)	2.8 s / 3 s / 5 s
Fence Arm	3 m (9.84 ft) / 3.5 m (11.48 ft) / 4 m (13.12 ft) / 4.5 m (14.76 ft)	3.5 s / 4.2 s / 5.5 s / 6 s

Functions and Control

Anti-drop

Yes, can be realized by connected radar, loop, or IR.

Auto Lifting against Obstruction

Yes

Count Mode

Yes

Hand Crank Control in Power Failure

Yes

Limit Description

Adjustable

Remote Control

Supports remote control at a maximum distance of 30 m (98.43 ft) when there is no interference.

Number of Pairable Remote Controllers

Power and Environmental Conditions

Power Output

12 V ± 5% (1A)

Power Supply

220 VAC ± 10% / 110 VAC ± 10% (can be changed with the DIP switch)

Power Consumption

<200 W

Operating Temperature

–35 °C to +65 °C (–31 °F to +149 °F)

Storage Temperature

–35 °C to +65 °C (–31 °F to +149 °F)

Operating Humidity

10%–90% (RH), non-condensing

Storage Humidity

10%–90%, non-condensing

Protection

IP54

Installation

It can be secured with screws at the bottom.

Dimensions and Weight

Product Dimensions (L×W×H)

335.0 mm × 285.0 mm × 930.0 mm (13.19" × 11.22" × 36.61")

Packaging Dimensions (L×W×H)

1,020.0 mm × 365.0 mm × 470.0 mm (40.16" × 14.37" × 18.50")

Net Weight

40.0 kg (88.18 lb)

Gross Weight

45.0 kg (99.21 lb)

Left telescopic arm barrier 4-5m

Options

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera

Left telescopic arm barrier 4-5m

Options

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera