Closes a wide vehicle entrance with a left-hand telescopic arm.

The left-hand telescopic arm barrier controls vehicle entrances across a 5–6 m opening. A 24 VDC brushless motor opens and closes the arm in 5.5 seconds, and the RS-485 interface links the barrier to the access control system. The metal housing carries an IP54 rating and works outdoors.

LeftArm Direction

5–6 mArm Length

5.5 sOpening / Closing Time

200 WPower Consumption

IP54Protection Grade

-35 °C / +65 °COperating Temperature

Key features

5.5s

Fast cycle on a wide opening

The telescopic arm completes its opening and closing movement within this time, which shortens waiting at a wide entrance.

200W

Low draw from the mains

The brushless DC motor runs on both 220 VAC and 110 VAC supplies, and a DIP switch moves between the two voltages.

9I/O ports

Links to the access system

The RS-485 interface and the I/O connections tie the barrier to card readers, plate recognition and alarm equipment.

30m

Remote control range

The remote works from this distance in an interference-free environment, and 30 remotes pair with the system.

12V

Power for external sensors

The barrier feeds a radar or a loop detector with up to 1 A of current.

DAILY USE

The arm lifts against obstaclesWhen the barrier senses a vehicle touching the arm, it lifts the arm automatically.

Works during a power cutThe hand crank lifts the arm manually while power is off, so entry and exit traffic keeps moving.

Remote, counting and fleet modeThe remote opens the arm, the counting mode keeps the number of passages, and fleet mode lets consecutive vehicles through.

Usage AreaParking areas·Residential complex entrances·Factories·Public institutions·Hotels

Anti-drop protection and obstacle detection work when an external radar, loop detector or IR sensor is connected.

Technical Specification
Basic
Arm Type	Straight arm, Telescopic arm, Folding arm, Fence arm (All systems include standard anti-smash rubber strip)
Arm Length	Straight arm: 3 m (9.84 ft) Telescopic arm: 3–4 m (9.84–13.12 ft), 4–5 m (13.12–16.40 ft), 5–6 m (16.40–19.69 ft) Folding arm: 3 m (1.5+1.5) (9.84 ft), 4 m (1.5+2.5) (13.12 ft), 5 m (2.5+2.5) (16.40 ft) Fence arm: 3 m (9.84 ft), 3.5 m (11.48 ft), 4 m (13.12 ft), 4.5 m (14.76 ft)
Arm Model	IPMECD-015X Series
Opening / Closing Time	Straight arm (3 m): 1.5 s Telescopic arm: 3–4 m → 2.8 s, 4–5 m → 4.8 s, 5–6 m → 5.5 s Folding arm: 3 m → 2.8 s, 4 m → 3 s, 5 m → 5 s Fence arm: 3 m → 3.5 s, 3.5 m → 4.2 s, 4 m → 5.5 s, 4.5 m → 6 s
Motor & Electrical Specifications
Motor Type	DC brushless motor
Spring	2 × 4.5 mm (0.18") spring
RS-485 Interface	1
Input/Output (I/O)	9
Status Output	2 channels (signals when arm is open or closed)
Functions
Anti-Fall Protection	Yes (can be done with radar, loop, or IR sensor)
Automatic Lifting on Obstruction	Yes
Counting Mode	Yes
Manual Control on Power Failure	Yes (using hand crank)
Limit Setting	Adjustable
Remote Control	Maximum 30 m (98.43 ft) in interference-free environment
Pairable Remote Controls	30
Power Output	12 V ±5% (1A)
General Specifications
Power Supply	220 VAC ±10% / 110 VAC ±10% (changeable via DIP switch)
Power Consumption	<200 W
Spring Life	800,000 cycles
Motor Life	3,000,000 cycles
Operating Temperature	–35 °C ~ +65 °C (–31 °F ~ +149 °F)
Storage Temperature	–35 °C ~ +65 °C (–31 °F ~ +149 °F)
Operating Humidity	10–90% (non-condensing)
Storage Humidity	10–90% (non-condensing)
Protection Class	IP54
Dimensions & Weight
Product Dimensions (L × W × H)	335 × 285 × 930 mm (13.19" × 11.22" × 36.61")
Package Dimensions (L × W × H)	1,020 × 365 × 470 mm (40.16" × 14.37" × 18.50")
Net Weight	40 kg (88.18 lb)
Gross Weight	45 kg (99.21 lb)
Installation
Can be fixed from the bottom using screws.

Closes a wide vehicle entrance with a left-hand telescopic arm.

LeftArm Direction

5–6 mArm Length

5.5 sOpening / Closing Time

200 WPower Consumption

IP54Protection Grade

-35 °C / +65 °COperating Temperature

Key features

5.5s

Fast cycle on a wide opening

The telescopic arm completes its opening and closing movement within this time, which shortens waiting at a wide entrance.

200W

Low draw from the mains

The brushless DC motor runs on both 220 VAC and 110 VAC supplies, and a DIP switch moves between the two voltages.

9I/O ports

Links to the access system

The RS-485 interface and the I/O connections tie the barrier to card readers, plate recognition and alarm equipment.

30m

Remote control range

The remote works from this distance in an interference-free environment, and 30 remotes pair with the system.

12V

Power for external sensors

The barrier feeds a radar or a loop detector with up to 1 A of current.

DAILY USE

The arm lifts against obstaclesWhen the barrier senses a vehicle touching the arm, it lifts the arm automatically.

Works during a power cutThe hand crank lifts the arm manually while power is off, so entry and exit traffic keeps moving.

Remote, counting and fleet modeThe remote opens the arm, the counting mode keeps the number of passages, and fleet mode lets consecutive vehicles through.

Usage AreaParking areas·Residential complex entrances·Factories·Public institutions·Hotels

Anti-drop protection and obstacle detection work when an external radar, loop detector or IR sensor is connected.

Technical Specification
Basic
Arm Type	Straight arm, Telescopic arm, Folding arm, Fence arm (All systems include standard anti-smash rubber strip)
Arm Length	Straight arm: 3 m (9.84 ft) Telescopic arm: 3–4 m (9.84–13.12 ft), 4–5 m (13.12–16.40 ft), 5–6 m (16.40–19.69 ft) Folding arm: 3 m (1.5+1.5) (9.84 ft), 4 m (1.5+2.5) (13.12 ft), 5 m (2.5+2.5) (16.40 ft) Fence arm: 3 m (9.84 ft), 3.5 m (11.48 ft), 4 m (13.12 ft), 4.5 m (14.76 ft)
Arm Model	IPMECD-015X Series
Opening / Closing Time	Straight arm (3 m): 1.5 s Telescopic arm: 3–4 m → 2.8 s, 4–5 m → 4.8 s, 5–6 m → 5.5 s Folding arm: 3 m → 2.8 s, 4 m → 3 s, 5 m → 5 s Fence arm: 3 m → 3.5 s, 3.5 m → 4.2 s, 4 m → 5.5 s, 4.5 m → 6 s
Motor & Electrical Specifications
Motor Type	DC brushless motor
Spring	2 × 4.5 mm (0.18") spring
RS-485 Interface	1
Input/Output (I/O)	9
Status Output	2 channels (signals when arm is open or closed)
Functions
Anti-Fall Protection	Yes (can be done with radar, loop, or IR sensor)
Automatic Lifting on Obstruction	Yes
Counting Mode	Yes
Manual Control on Power Failure	Yes (using hand crank)
Limit Setting	Adjustable
Remote Control	Maximum 30 m (98.43 ft) in interference-free environment
Pairable Remote Controls	30
Power Output	12 V ±5% (1A)
General Specifications
Power Supply	220 VAC ±10% / 110 VAC ±10% (changeable via DIP switch)
Power Consumption	<200 W
Spring Life	800,000 cycles
Motor Life	3,000,000 cycles
Operating Temperature	–35 °C ~ +65 °C (–31 °F ~ +149 °F)
Storage Temperature	–35 °C ~ +65 °C (–31 °F ~ +149 °F)
Operating Humidity	10–90% (non-condensing)
Storage Humidity	10–90% (non-condensing)
Protection Class	IP54
Dimensions & Weight
Product Dimensions (L × W × H)	335 × 285 × 930 mm (13.19" × 11.22" × 36.61")
Package Dimensions (L × W × H)	1,020 × 365 × 470 mm (40.16" × 14.37" × 18.50")
Net Weight	40 kg (88.18 lb)
Gross Weight	45 kg (99.21 lb)
Installation
Can be fixed from the bottom using screws.

Left telescopic arm barrier 5-6m

Options

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera

Left telescopic arm barrier 5-6m

Options

Datasheet

EN

Similar Products

Outdoor Guidance Screen

Parking Space Detection Camera

Parking Space Detection Camera

Parking Space Detection Camera