Distributes video and audio to a local screen and a remote screen at once.

An extender that carries VGA and stereo audio signals up to 100 m over a single Cat5e/6 UTP cable. It sends the input signal to the local display unit and to the remote unit at the same time. The installation rides on the structured cabling already in the building.

100 mExtender Distance

1920x1200Resolution

Cat5e/6Cable Type

1 x VGALocal Output

1 x UTPRemote Output

Key features

100m

Floor level distance

A single UTP run takes the picture and the sound to a far room on the same floor.

1920x1200pixels

High resolution support

Shows full resolution on wide format monitors and projectors.

1UTP output

Transmission to the remote screen

Feeds the remote display unit over a single link.

1VGA output

Local screen output

The screen next to the source runs independently of the remote link.

Cat5e/6UTP cable

Installs on existing cabling

Runs over the standard UTP link of a structured cabling system.

DAILY USE

Local and remote screen togetherIt feeds the nearby screen and the remote screen at the same time, so a separate splitter is not necessary.

Fine tuning for the cable runGAIN corrects brightness and PEAK corrects skew, so the picture stays clean on long runs.

Works with common display devicesIt drives monitors, projectors, HDTVs and flat panels.

The unit reaches the stated distance over a single Cat5e/6 UTP cable; on different cable lengths the GAIN and PEAK settings correct the picture.

VGA UTP Extender 1x2 Audio & Video - Technical Specifications

Transmission Distance

Transmits VGA and stereo audio signals over a single UTP Cat5e/6 cable up to 100 m

Signal Adjustment

GAIN: Brightness control
PEAK: Skew (timing) adjustment

Supported Resolution

Up to 1920x1200

Outputs

1 x VGA output (local display) | 1 x UTP output (remote display)

Compatibility

Works seamlessly with monitors, projectors, HDTVs, and flat panels