Distributes video and audio to a local screen and a remote screen at once.
An extender that carries VGA and stereo audio signals up to 300 m over a single Cat5e/6 UTP cable. It also acts as a splitter, sending the input signal to the local display unit and to the remote unit with no delay. The receiver unit takes the signal from the transmitter and passes it straight to the screen.
300 mExtender Distance
1920x1200Resolution
Cat5e/6Cable Type
1 x VGALocal Output
1 x UTPRemote Output
Key features
300m
Long distance transmission
The UTP link between the transmitter and the receiver takes the picture to a room far away.
1920x1200pixels
High resolution support
Shows full resolution on wide format monitors and projectors.
1UTP output
Transmission to the remote screen
Feeds the remote display unit over a single link.
1VGA output
Local screen output
The screen next to the source runs independently of the remote link.
Cat5e/6UTP cable
Installs on existing cabling
Runs over the standard UTP link of a structured cabling system.
DAILY USESplitter and extender in one unitIt feeds the local screen and the remote screen at the same time, so a separate splitter is not necessary.
Fine tuning for the cable runGAIN corrects brightness and PEAK corrects skew, so the picture stays clean on long runs.
Works with common display devicesIt drives monitors, projectors, HDTVs and flat panels.
Usage AreasVideo presentations·Display applications·Security·Data center control·IT systems·Conference rooms·Schools·Companies
The unit reaches the stated distance over a single Cat5e/6 UTP cable; on different cable lengths the GAIN and PEAK settings correct the picture.
