Hardware Specifications
RF	2.4GHz: 2 x 2 MIMO
RF	5GHz: 2 x 2 MIMO
Transmission Protocol	2.4GHz: 802.11b/g/n
Transmission Protocol	5GHz: 802.11a/n/ac
Operating Bands	802.11b/g/n: 2.4 GHz to 2.4835 GHz
	802.11a/n/ac: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.85 GHz
	(Depending on which country the AP is installed)
Antenna	Built-in omnidirectional, antenna gain: 3 dBi
Spatial Streams	2
Access Rates	2.4GHz: up to 300 Mbps
	5GHz: up to 867 Mbps
	Total: up to 1.167 Gbps
Modulation	OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
	DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps
	MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receive Sensitivity	802.11b: -99 dBm (1 Mbps), -93 dBm (5.5 Mbps), -90 dBm (11 Mbps)
	802.11a/g: -93 dBm (6 Mbps), -85 dBm (24 Mbps), -82 dBm (36 Mbps), -77 dBm (54 Mbps)
	802.11n: -92 dBm@MCS0, -74 dBm@MCS7, -92 dBm@MCS8, -73 dBm@MCS15
	802.11ac HT20: -90 dBm (MCS0), -65 dBm (MCS8)
	802.11ac HT40: -85 dBm (MCS0), -60 dBm (MCS9)
	802.11ac HT80: -82 dBm (MCS0), -58 dBm (MCS9)
Maximum Transmit Power	20 dBm (Adjustable)
Transmit Power Adjustment	1 dBm
Physical Features
Dimensions (W x D x H)	194 mm x 194 mm x 37 mm
Weight	0.42 kg
Service Ports	One 10/100/1000BASE-T Ethernet port (PoE-capable)
Management Ports	One RJ45 Console port
LED	1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)
Power Supply	Adapter: DC 12V (optional)
Power Supply	PoE: IEEE 802.3af
Power Consumption	Maximum: 12.95 W
Temperature	Operating: -10°C to 50°C (14°F to 122°F)
Temperature	Storage: -40°C to 70°C (-40°F to 158°F)
Humidity	Operating: 5% to 95% (non-condensing)
Humidity	Storage: 5% to 95% (non-condensing)
Installation	Ceiling/wall mount
IP Rating	IP41
Safety Standards	GB4943
Safety Standards	IEC 60950-1
EMC Standards	GB9254
	EN301 489
	EN50155: EN50121
Vibration Standards	IEC61373
Radio	China Radio Transmission Equipment Type Approval Certificate
	EN300 328
	EN301 893
MTBF	> 400,000 H

Delivers dual-band wireless access indoors from a single point.

This Wave 2 indoor access point runs the 2.4 GHz and 5 GHz bands at the same time. It uses a built-in omnidirectional antenna, supports ceiling and wall mounting, and draws power from a PoE switch over a single Ethernet cable.

1.167 GbpsTotal access rate

867 Mbps5 GHz access rate

802.3afPoE power

IP41Protection Grade

-10°C ~ 50°COperating Temperature

Key features

867Mbps

5 GHz band rate

Serves 802.11ac clients on this band.

300Mbps

2.4 GHz band rate

802.11b/g/n clients get service at the same time.

1.167Gbps

Combined dual-band rate

Both radios work together and raise total bandwidth.

2 x 2MIMO

Dual streams on each band

Two spatial streams carry data simultaneously.

12.95W

Maximum power consumption

An 802.3af PoE switch powers the unit over one cable.

3dBi

Built-in omnidirectional antenna

The unit spreads the signal evenly and needs no extra hardware.

DAILY USE

Single-cable installOne Ethernet cable from the PoE switch carries both data and power.

Ceiling or wallThe compact body fits on a ceiling or wall and takes no extra space.

Indicator lightA single LED shows status through color and blinking, and turns off completely when needed.

Hardware Specifications

2.4GHz: 2 x 2 MIMO

5GHz: 2 x 2 MIMO

Transmission Protocol

2.4GHz: 802.11b/g/n

5GHz: 802.11a/n/ac

Operating Bands

802.11b/g/n: 2.4 GHz to 2.4835 GHz

802.11a/n/ac: 5.15 GHz to 5.35 GHz, 5.47 GHz to 5.725 GHz, 5.725 GHz to 5.85 GHz

(Depending on which country the AP is installed)

Antenna

Built-in omnidirectional, antenna gain: 3 dBi

Spatial Streams

Access Rates

2.4GHz: up to 300 Mbps

5GHz: up to 867 Mbps

Total: up to 1.167 Gbps

Modulation

OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps

DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps

MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM

Receive Sensitivity

802.11b: -99 dBm (1 Mbps), -93 dBm (5.5 Mbps), -90 dBm (11 Mbps)

802.11a/g: -93 dBm (6 Mbps), -85 dBm (24 Mbps), -82 dBm (36 Mbps), -77 dBm (54 Mbps)

802.11n: -92 dBm@MCS0, -74 dBm@MCS7, -92 dBm@MCS8, -73 dBm@MCS15

802.11ac HT20: -90 dBm (MCS0), -65 dBm (MCS8)

802.11ac HT40: -85 dBm (MCS0), -60 dBm (MCS9)

802.11ac HT80: -82 dBm (MCS0), -58 dBm (MCS9)

Maximum Transmit Power

20 dBm (Adjustable)

Transmit Power Adjustment

1 dBm

Physical Features

Dimensions (W x D x H)

194 mm x 194 mm x 37 mm

Weight

0.42 kg

Service Ports

One 10/100/1000BASE-T Ethernet port (PoE-capable)

Management Ports

One RJ45 Console port

LED

1 LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and the indicator can be switched off to silent mode)

Power Supply

Adapter: DC 12V (optional)

PoE: IEEE 802.3af

Power Consumption

Maximum: 12.95 W

Temperature

Operating: -10°C to 50°C (14°F to 122°F)

Storage: -40°C to 70°C (-40°F to 158°F)

Humidity

Operating: 5% to 95% (non-condensing)

Storage: 5% to 95% (non-condensing)

Installation

Ceiling/wall mount

IP Rating

IP41

Safety Standards

GB4943

IEC 60950-1

EMC Standards

GB9254

EN301 489

EN50155: EN50121

Vibration Standards

IEC61373

Radio

China Radio Transmission Equipment Type Approval Certificate

EN300 328

EN301 893

MTBF

> 400,000 H

Indoor Wireless Access Point

Datasheet

RG-AP520(W2)

Similar Products

Wi-Fi 6 11ax Dual Band 4x4 Indoor Access Point (Stand-alone, Controller & ecCLOUD)

Cloud-Enabled Outdoor 60GHz PTP + 5GHz + 2.4GHz

Spark™ Wave 2 Mini AC1200 PoE - Dualband Concurrent Enterprise AP w/ int antenna

Spark Wave 2 AC1200 - Dualband Concurrent Enterprise AP w/ int antenna, PoE