Consolidates a fiber-based access layer into a single chassis.

It works as a managed Ethernet switch carrying 24 optical gigabit ports and 4 × 10G SFP+ uplinks. In campus and building networks built mostly on fiber, it sits between the core and the access layer.

256 Gbit/sSwitching capacity

96 MppsPacket forwarding rate

24 × 100/1000Base-XOptical ports

4 × 10G BASE-X SFP+Uplink ports

0 °C – 45 °COperating temperature

Key features

Fixed ports24 optical gigabit ports and 4 × 10G SFP+ ports are fixed on the chassis, and 8 of them work as combo ports.

IRF2 stackingIt stacks locally and remotely over standard Ethernet interfaces and manages several units as one chassis.

Security control802.1X authentication, port isolation, source IP address protection and ARP intrusion detection limit access.

Traffic prioritizationEach port carries 8 output queues, and SP, WRR and SP+WRR scheduling set the priority.

Energy savingEEE (802.3az) powers down idle ports automatically, and a schedule job shuts ports down at planned times.

Power and mountingIt runs from AC 100–240 V or a DC line between –36 V and –72 V, and the 440 × 360 × 43.6 mm chassis fits a rack.

Technical Specification
Switching capacity	256 Gbit/s
Packet forwarding rate	96 Mpps
Fixed port	24 × 100/1000Base-X optical port (8 × Combo port) 4 × 10G BASE-X SFP+ optical port
Link aggregation	GE/10GE port aggregation Dynamic aggregation Cross-device aggregation
Port	IEEE 802.3x-based full-duplex traffic control Storm suppression based on port rate percentage PPS-based and BPS-based storm suppression
IRF2	IRF2 Stacking via standard Ethernet interfaces Local stacking and remote stacking Distributed device management and distributed link aggregation
IP routing	Supports static routing
VLAN	Port-based VLANs Protocol-based VLANs QinQ and flexible QinQ VLAN mapping Voice VLANs Guest VLANs
ACL	Packet filtering on layer 2 (L2) to layer 4 (L4) Flow classification based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port, IP protocol type, and VLAN ACLs based on time ranges Global issuance of ACLs based on ports or VLANs
QoS	Restriction of the packet receiving rate and packet transmission rate on ports Packet redirection Eight output queues on each port Queue scheduling on ports (SP, WRR, and SP+WRR) Re-marking of 802.1p and DSCP priorities of packets
DHCP	DHCP Client DHCP Snooping DHCP Snooping option82 DHCP Relay DHCP Server DHCP auto-config (zero configuration)
Multicast	IGMP Snooping / MLD Snooping Multicast VLANs
Layer-2 ring network protocol	STP, RSTP, MSTP, PVST
OAM	802.1ag and 802.3ah
Mirroring	Port mirroring Remote switched port analyzer (RSPAN) Traffic mirroring
Security	Level-based user management and password protection 802.1X authentication and centralized MAC address authentication Guest VLANs RADIUS authentication SSH 2.0 Port isolation Port security Restriction on the number of learned MAC addresses Protection of source IP addresses Detection of ARP intrusion IP address + MAC address + port multi-element binding
Management and maintenance	Loading and upgrade via XModem, FTP, or TFTP Configurations via the CLI, Telnet and Console port SNMPv1/v2/v3 and Web-based network management RMON alarms, events, and history records Intelligent management centers Output of system logs, hierarchical alarms, and debugging information NTP Ping and Tracert Virtual Cable Test (VCT) Device Link Detection Protocol (DLDP) Loopback detection for ports Temperature alarms for the power sources and fans CPU protection
Environment friendliness and energy saving	EEE (802.3az) Automatic power down function of ports Scheduled down function of ports (schedule job)
Input voltage	Rated voltage range: AC: 100–240 V, 50/60 Hz DC: –36 V to –72 V
Dimensions (length × width × height) (unit: mm)	440 × 360 × 43.6
Power consumption	Static: 30 W (AC) or 38 W (DC) Full load: 60 W (AC) or 68 W (DC)
Operating ambient temperature	0 °C (32 °F) – 45 °C (113 °F)
Relative operating ambient humidity (non-condensing)	5% – 95%

Technical Specification

Switching capacity

256 Gbit/s

Packet forwarding rate

96 Mpps

Fixed port

24 × 100/1000Base-X optical port (8 × Combo port)
4 × 10G BASE-X SFP+ optical port

Link aggregation

GE/10GE port aggregation
Dynamic aggregation
Cross-device aggregation

Port

IEEE 802.3x-based full-duplex traffic control
Storm suppression based on port rate percentage
PPS-based and BPS-based storm suppression

IRF2

IRF2
Stacking via standard Ethernet interfaces
Local stacking and remote stacking
Distributed device management and distributed link aggregation

IP routing

Supports static routing

VLAN

Port-based VLANs
Protocol-based VLANs
QinQ and flexible QinQ
VLAN mapping
Voice VLANs
Guest VLANs

ACL

Packet filtering on layer 2 (L2) to layer 4 (L4)
Flow classification based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port, IP protocol type, and VLAN
ACLs based on time ranges
Global issuance of ACLs based on ports or VLANs

QoS

Restriction of the packet receiving rate and packet transmission rate on ports
Packet redirection
Eight output queues on each port
Queue scheduling on ports (SP, WRR, and SP+WRR)
Re-marking of 802.1p and DSCP priorities of packets

DHCP

DHCP Client
DHCP Snooping
DHCP Snooping option82
DHCP Relay
DHCP Server
DHCP auto-config (zero configuration)

Multicast

IGMP Snooping / MLD Snooping
Multicast VLANs

Layer-2 ring network protocol

STP, RSTP, MSTP, PVST

OAM

802.1ag and 802.3ah

Mirroring

Port mirroring
Remote switched port analyzer (RSPAN)
Traffic mirroring

Security

Level-based user management and password protection
802.1X authentication and centralized MAC address authentication
Guest VLANs
RADIUS authentication
SSH 2.0
Port isolation
Port security
Restriction on the number of learned MAC addresses
Protection of source IP addresses
Detection of ARP intrusion
IP address + MAC address + port multi-element binding

Management and maintenance

Loading and upgrade via XModem, FTP, or TFTP
Configurations via the CLI, Telnet and Console port
SNMPv1/v2/v3 and Web-based network management
RMON alarms, events, and history records
Intelligent management centers
Output of system logs, hierarchical alarms, and debugging information
NTP
Ping and Tracert
Virtual Cable Test (VCT)
Device Link Detection Protocol (DLDP)
Loopback detection for ports
Temperature alarms for the power sources and fans
CPU protection

Environment friendliness and energy saving

EEE (802.3az)
Automatic power down function of ports
Scheduled down function of ports (schedule job)

Input voltage

Rated voltage range:
AC: 100–240 V, 50/60 Hz
DC: –36 V to –72 V

Dimensions (length × width × height) (unit: mm)

440 × 360 × 43.6

Power consumption

Static: 30 W (AC) or 38 W (DC)
Full load: 60 W (AC) or 68 W (DC)

Operating ambient temperature

0 °C (32 °F) – 45 °C (113 °F)

Relative operating ambient humidity (non-condensing)

5% – 95%

High-performance 1000M Ethernet Switches

Datasheet

S5500-24GF4XF

Firmware

S5500-24GF4XF

Fotoğraf

S5500-24GF4XF

Similar Products

L2 Gigabit Ethernet Access / Aggregation Switch with 4 10G Uplinks

10 Port L2 Gigabit Ethernet PoE Switch

24-Port PoE Gigabit Managed Switch

16-Port PoE Gigabit Managed Switch

High-performance 1000M Ethernet Switches

Datasheet

S5500-24GF4XF

Firmware

S5500-24GF4XF

Fotoğraf

S5500-24GF4XF

Similar Products

L2 Gigabit Ethernet Access / Aggregation Switch with 4 10G Uplinks

10 Port L2 Gigabit Ethernet PoE Switch

24-Port PoE Gigabit Managed Switch

16-Port PoE Gigabit Managed Switch