This nickel-plated XLR chassis connector brings a 3-pin male interface onto the device panel. Its contacts reach the printed circuit board through solder pins, and a 26.0 × 31.0 mm flange seats the body on the panel.
Panel cut-outIt calls for a Ø24.0 mm cut-out plus 2 × Ø3.50 mm mounting holes spaced 19.0 × 24.0 mm apart.
Body dimensionsOverall length is 36.5 mm, with 22.0 mm of body behind the flange.
Front projectionThe spigot stands 3.0 mm in front of the panel, and spigot plus flange thickness comes to 5.5 mm.
PCB hole layoutA Ø1.2 mm hole diameter, 4.06 mm horizontal contact pitch and a 3.96 mm vertical offset on contact 3.
Finish and complianceThe shell is nickel-plated and complies with RoHS 2002/95/EC.
Series variantThe matt black version of the same body carries the part number AC3MMDZVB.
