Adds 30 W of PoE+ power to a network without PoE support.
An injector that steps in to carry power to a camera without replacing the existing switch. One port takes the network link, and the other sends data and IEEE802.3at power over the same cable.
PoE+ power outputDelivers up to 30 W under the IEEE802.3af and IEEE802.3at standards.
Gigabit data pass-throughThe two 10/100/1000 Base-T ports comply with IEEE802.3, IEEE802.3u and IEEE802.3ab, passing data through without dropping speed.
Mains supplyRuns on mains voltage in the AC 100~240 V, 50/60 Hz range.
Status indicatorsThe green PSE indicator shows that the device delivers power to the PD, and the green PWR indicator reports that the device works properly.
Wide temperature designOperates between -10°C ~ +55°C and at 10% ~ 90% relative humidity; the 250 g body measures 132.3 mm × 60 mm × 33 mm.
