Артикул: SP-4-MD
| General Characteristics | |
|---|---|
| Number of Contacts | 2 or 4 |
| Termination (Chassis) | Printed Circuit Board (PCB) or Solder Tabs 3/16" |
| Termination (Cable Plugs) | Screw or Solder Terminals |
| Flammability | UL94HB |
| Environmental | Complies with EU RoHS 2 Directive 2011/65/EU |
| Electrical Characteristics | |
| Service Voltage RMS | 133V |
| Test Voltage AC RMS | 1500V |
| Current Carrying Capacity | 20A |
| Typical Contact Resistance | ≤3mΩ |
| Insulation Resistance (initial) | ≥2GΩ |
| Insulation Resistance (after damp heat test) | ≥1GΩ |
| Climatic Characteristics | |
| Protection Class (Mated Condition) | IP20 (IP40) |
| Operating Temperature | -25°C to +75°C (-13°F to +167°F) |
| Mechanical Characteristics | |
| Weight** - Chassis Connectors | 12g (0.026lb) |
| Weight** - Cable Plug - Thermoplastic - Metal |
44g (0.097lb) 65g (0.143lb) |
| Weight** - Cable Plug PG - Thermoplastic - Metal |
44g (0.097lb) 65g (0.143lb) |
| Weight** - Cable Plug PG S/Relief - Thermoplastic - Metal |
68g (0.150lb) 89g (0.196lb) |
| Typical Cable Retention Force | 200N (Subject to cable material and O.D.) |
| Cable O.D Range - Chuck Clamp - PG16 Gland - PG16 Gland S/Relief |
2 pole / 4 pole 5-10mm (0.19" - 0.39") / 9-14mm (0.35" - 0.55") 6-12mm (0.23" - 0.47") / 8-14mm (0.31" - 0.55") 9-14mm (0.35" - 0.55") / 9-14mm (0.35" - 0.55") |
| Conductor Size - Screw Terminals - Solder Bucket |
1.5mm² - 4mm² (AWG16 - AWG12) 1.5mm² - 6mm² (AWG16 - AWG10) |
| Mechanical Operations | 5000 mating cycles |
| Materials | |
| Connector Shell / Finish - Cable Plug Thermoplastic - Cable Plug Metal |
PA66 GF30 / Black Diecast Zinc Alloy / Nickel or Black |
| Insulators - Chassis - Cable Plugs |
PA66 GF20 PA66 GF30 |
| Cable Boot / Backshell | Santoprene / PA6 GF 15 |
| Cable Clamp (Chuck) | P.O.M |
| Cable Clamp (PG) | Polyamide / EPDM |
| Sleeve | PBT |
| Contact Chassis - Material / Plating Contact Cable Plug - Material / Plating |
Phosphor Bronze / Silver Brass / Silver |
