A 30-pin embedded module that mounts on the host board. It links a TTL-level serial port to 10/100 Mbps Ethernet and opens the device to network access.
Serial signalsIt carries the TxD, RxD, RTS, CTS, DTR, DSR, DCD and GND lines.
Serial settingsIt takes 7 or 8 data bits, odd/even/none parity and 1 or 2 stop bits. Flow control runs over Xon/Xoff or RTS/CTS.
ProtocolsIt speaks TCP, UDP, HTTP, Telnet, IP, ICMP and ARP.
Operating modesIt runs in TCP/Server, TCP/Client and UDP modes, and takes its IP address from DHCP or from a static entry.
Programmable I/OThe PIO0 ~ PIO6 pins work as TTL-level inputs or outputs.
Module bodyA 37 × 27 × 12 mm body carries 30 dual-row pins on a 1.27 mm pitch.
