Name: Flush Mounted Box for VTO2202F-P
Brand: Dahua
SKU: VTM114

Recesses the door station into the wall.

A flush mounting box for the door station. The rear cover goes into the wall opening and the front cover carries the door station, while screws with waterproof rings hold the two covers together.

VTO2202F-PCompatible Model

ADC12Material

128.9 × 162.9 × 34.5 mmFront cover dimensions

123.0 × 157.0 × 35.0 mmRear cover dimensions

Flush mountInstallation Type

Key features

Flush mounting boxThe rear cover sits inside the wall opening and the front cover, which carries the door station, fits over it.

Wall opening sizeThe wall opening ranges from 113.0 mm × 149.0 mm × 35.0 mm to 123.0 mm × 157.0 mm × 35.0 mm.

ADC12 bodyThe box is made of ADC12 and gives the door station a rigid mounting surface.

Door station fixingTwo M3×8 screws hold the door station from the bottom of the front cover.

Waterproof screw fixingFour M3×8 screws with waterproof rings fasten the front cover to the rear cover.

General

Model

VTM114

Compatible Model

VTO2202F-P

Material

ADC12

Dimensions (mm [inch])

Dimensions (Front)

128.9 mm × 162.9 mm × 34.5 mm (5.08" × 6.42" × 1.36")

Dimensions (Rear)

123.0 mm × 157.0 mm × 35.0 mm (4.84" × 6.18" × 1.38")

Wall Opening Dimensions

> 113.0 mm × 149.0 mm × 35.0 mm (4.45" × 5.87" × 1.38") ; < 123.0 mm × 157.0 mm × 35.0 mm (4.84" × 6.18" × 1.38")

Installation

Step 1

Install the mounting box rear cover in the wall.

Step 2

Install the VTO on the mounting box front cover.

Step 3

Fix the VTO to the mounting box front cover by screwing two M3×8 screws into the VTO from the bottom of the mounting box front cover.

Step 4

Put the mounting box front cover (with the VTO) into the mounting box rear cover.

Step 5

Put waterproof rings on the M3×8 screws.

Step 6

Screw four M3×8 screws (with waterproof rings) into the mounting box front cover.

Recesses the door station into the wall.

A flush mounting box for the door station. The rear cover goes into the wall opening and the front cover carries the door station, while screws with waterproof rings hold the two covers together.

VTO2202F-PCompatible Model

ADC12Material

128.9 × 162.9 × 34.5 mmFront cover dimensions

123.0 × 157.0 × 35.0 mmRear cover dimensions

Flush mountInstallation Type

Key features

Flush mounting boxThe rear cover sits inside the wall opening and the front cover, which carries the door station, fits over it.

Wall opening sizeThe wall opening ranges from 113.0 mm × 149.0 mm × 35.0 mm to 123.0 mm × 157.0 mm × 35.0 mm.

ADC12 bodyThe box is made of ADC12 and gives the door station a rigid mounting surface.

Door station fixingTwo M3×8 screws hold the door station from the bottom of the front cover.

Waterproof screw fixingFour M3×8 screws with waterproof rings fasten the front cover to the rear cover.

General

Model

VTM114

Compatible Model

VTO2202F-P

Material

ADC12

Dimensions (mm [inch])

Dimensions (Front)

128.9 mm × 162.9 mm × 34.5 mm (5.08" × 6.42" × 1.36")

Dimensions (Rear)

123.0 mm × 157.0 mm × 35.0 mm (4.84" × 6.18" × 1.38")

Wall Opening Dimensions

> 113.0 mm × 149.0 mm × 35.0 mm (4.45" × 5.87" × 1.38") ; < 123.0 mm × 157.0 mm × 35.0 mm (4.84" × 6.18" × 1.38")

Installation

Step 1

Install the mounting box rear cover in the wall.

Step 2

Install the VTO on the mounting box front cover.

Step 3

Fix the VTO to the mounting box front cover by screwing two M3×8 screws into the VTO from the bottom of the mounting box front cover.

Step 4

Put the mounting box front cover (with the VTO) into the mounting box rear cover.

Step 5

Put waterproof rings on the M3×8 screws.

Step 6

Screw four M3×8 screws (with waterproof rings) into the mounting box front cover.

Flush Mounted Box for VTO2202F-P

Datasheet

VTM114

Teknik Çizim

VTM114

VTM114

Fotoğraf

VTM114

VTM114

Похожие товары

Fingerprint Reader

Mount box

Mount box

Panel

Flush Mounted Box for VTO2202F-P

Datasheet

VTM114

Teknik Çizim

VTM114

VTM114

Fotoğraf

VTM114

VTM114

Похожие товары

Fingerprint Reader

Mount box

Mount box

Panel