Артикул: EAP102
| General Information | |
|---|---|
| Product Model | EAP102 |
| Brand | Edgecore |
| Product Name | Concurrent Dual-Band Wi-Fi 6 Indoor Access Point |
| Network Specifications | |
| Interfaces | • Uplink: 1 x 10/100/1000/2.5GBase-T Ethernet, Auto MDIX, RJ-45 with 802.3at PoE • LAN: 1 x 10/100/1000/2.5GBase-T Ethernet, Auto MDIX, RJ-45 • Console: 1 x RJ-45 port • USB: 2 x USB 2.0 port (one USB port works at a time) |
| Wireless Standards | • 802.11ax (Wi-Fi 6) • Concurrent dual-band 2.4 & 5 GHz |
| Supported Data Rates | • 802.11b: 1, 2, 5.5, 11 Mbps • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps • 802.11n: 6.5 – 300 Mbps (20 / 40 MHz) • 802.11ac: 6.5 – 1733 Mbps (20 / 40 / 80 MHz) • 802.11ax: 3.6 – 574 Mbps (2.4 GHz, 20 / 40 MHz) • 802.11ax: 3.6 – 2400 Mbps (5 GHz, 20 / 40 / 80 MHz) |
| Radio Chains | • 2.4 GHz: 2 x 2 • 5 GHz: 4 x 4 |
| Spatial Streams | • 2.4 GHz: 2; MU-MIMO support • 5 GHz: 4; MU-MIMO support |
| Aggregate Conducted Transmit Power | • 2.4 GHz: Up to 23 dBm • 5 GHz: Up to 26 dBm • RF output power aggregates across MIMO chains and does not contain antenna gain; maximum power is limited by local regulatory requirements |
| Channelization | • 2.4 GHz: 20 / 40 MHz • 5 GHz: 20 / 40 / 80 MHz |
| Frequency Range | • 2.400 – 2.483 GHz • 5.150 – 5.850 GHz |
| Operating Channels | • 2.4 GHz: 1 – 11 (US), 1 – 13 (Europe), 1 – 13 (Japan) • 5 GHz: 36 – 165 (US), 36 – 140 (Europe), 36 – 144 (Japan) • Some channels are restricted by local regulatory requirements and certifications |
| ESSIDs | Up to 16 per radio (32 total) |
| Physical Data Rate | • Up to 574 Mbps (2.4 GHz) • Up to 2400 Mbps (5 GHz) |
| Antenna Type | 4 x Built-in antenna (2.4 GHz & 5 GHz) |
| Antenna Gain | 5.5 dBi (2.4 GHz, BLE), 7.6 dBi (5 GHz) |
| Wireless Features | • 802.11 k/v/r • Orthogonal Frequency Division Multiple Access (OFDMA) • Client Isolation • Open Mesh • BSS Coloring • Band Steering • Wi-Fi Enhanced Open (OWE) • Wireless Site Survey |
| Network Features | • Spanning Tree Protocol (STP) • Dynamic Host Configuration Protocol (DHCP) • DHCP Relay • 802.1q • Access Control List (ACL) • Network Address Translation (NAT) • Dynamic VLAN • Link Layer Discovery Protocol (LLDP) • Smart Isolation • IPv6 compatible • Proxy ARP |
| Quality of Service (QoS) | • RSSI Threshold (Optimal Client Filtering) • Multicast-to-Unicast Conversion • WME |
| Mobility | OpenRoaming (Hotspot 2.0 R1) |
| Other Features | • Target Wake Time (TWT) • iBeacon • Hotspot Captive Portal • Dynamic Authorization (DAE) |
| Management and Security | |
| Security Features | • WPA-Personal (AES) • WPA-Enterprise (AES) • WPA2-Personal (AES) • WPA2-Enterprise (AES) • WPA3-Personal (AES) • WPA3-Personal Transition (AES) • WPA3-Enterprise (AES) • WPA3-Enterprise Transition (AES) • Multi Pre-Shared Key (MPSK) • Dynamic Pre-Shared Key (DPSK) • MAC Address Authentication • DHCP Snooping • ARP Inspection • L3 Firewall |
| Maintenance and Management | • Network Time Protocol (NTP) • Standalone • Management by ecCLOUD • Management by ecCLOUD-VPC • Management by EWS-Series Controller (Complete Tunnel/Split Tunnel) • SSH • QR Code Onboarding • SNMP v1/v2c/v3 • Remote Syslog • Discovery Tool • Zero Touch Provisioning (ZTP) |
| Diagnostics | |
| LED Indicators | • Uplink • 2.4G-WiFi • 5G-WiFi • Power |
| AI-Enabled Detection – Internet (WAN) | • Throughput (Up/Down) • Packet Drops • Roundtrip Latency • Usage |
| AI-Enabled Detection – Wi-Fi Connection/Experience | • DHCP Exchanges • EAP Failures • Slow Connectivity • Connection Drops • Poor Signal • Beacon Miss • Steering Efficiency • AP Stability • Wrong Key • Inactivity • Radio Congestion • Wi-Fi Latency • Hogging Airtime |
| AI-Enabled Detection – Wi-Fi Roaming | • Poor AP Selection • Poor Overlap • AP Slow Response • Sticky Client • Slow Roaming |
| AI-Enabled Detection – Application | • Reachability • Upstream Health • Downstream Health |
| Power Supply | |
| DC Input | 12 V / 2.0 A (power adapter included) |
| PoE Power | 802.3at compliant (PoE injector optional) |
| Power Consumption | 25 W max (22 W when powered by DC) |
| Mechanical Specifications | |
| Mounting | Wall / ceiling / T-bar mount (mounting kit included) |
| Buttons | Restart / Reset |
| Dimensions and Weight | |
| Dimensions (L × W × H) | 19.5 cm x 20.1 cm x 3.98 cm (7.68 x 7.91 x 1.57 in) |
| Weight | 0.7 kg (1.54 lb) |
| Environmental Conditions | |
| Operating Temperature | 0 °C (32 °F) to 45 °C (113 °F) |
| Operating Humidity | 5% to 95% non-condensing |
| Certifications | |
| Certifications | • FCC • CE • LVD • NCC • BSMI • VCCI • JATE • TELEC • IC • C-Tick • Philippines • Thailand |
