Adds 8 alarm outputs to an alarm panel over RS-485.
An output expansion module that connects to the alarm control panel over an RS-485 line. It carries 8 channels of alarm output, takes its address from a DIP switch, and runs on 12 VDC. Each output handles a 30 VDC / 500 mA load.
Alarm outputsCarries 8 channels of alarm output; each output handles a 30 VDC / 500 mA load.
AddressingA DIP switch sets the address, using 0-15 on the ARC9 and ARC2 series and 1-8 on the ARC3008.
Output modeA jumper switches the alarm output between NO and NC.
RS-485 lineRuns a link up to 300 m long on RVV2 × 1.5 cable.
Remote updateTakes remote updates from the client software.
Power and environmentConsumes 1.8 W at 12 VDC and works between -10 °C and +55 °C at 10%-90% relative humidity.
