HDMI Ultra Extender 4K - 2160P 120m with Cascade and Loop Out

Setup and Connection

1. Connect the source device to the transmitter using an HDMI cable (maximum cable length: 10 meters).

2. Connect the display device to the receiver using an HDMI cable (maximum cable length: 10 meters).

3. Connect the TX and RX units using a CAT5e or CAT6 cable (recommended), with a maximum length of 120 meters.

4. Connect a pair of IR RX and IR TX cables to the 3.5 mm IR RX and IR TX ports on the transmitter and receiver, respectively.

5. Connect the power supply to both the TX and RX units.

6. LED Indicator: When a signal is detected, the LED lights solid blue.