Moves a Gigabit copper link onto fiber and reports a break at both ends.

A Gigabit media converter series that links a 10/100/1000BASE-T copper port to a 1000BASE-SX/LX fiber port. It covers 220 m on multi-mode and up to 120 km on single-mode links, and it serves as a standalone unit or in a 7- or 15-slot converter chassis.

10/100/1000BASE-TCopper port

1000BASE-SX/LXFiber port

220 m – 120 kmFiber distance

2000 MbpsFull duplex speed

5 V DC / 2 APower input

0 ~ 50 °COperating Temperature

Key features

9 Kjumbo packet

Large packet support

It carries jumbo packets up to 9 K.

100m

Reach on the copper side

The 1000BASE-T link runs up to 100 m over 4-pair STP Cat. 5 cable.

4.6W

Low consumption

At maximum load it draws 4.6 W and gives off 15 BTU.

LFPDIP switch

Passes the link fault through

LLCF and LLR drop the link at the far end and alert the administrator.

0.2kg

Wall and DIN-rail mounting

The 94 × 70 × 26 mm body mounts on a wall, in a chassis or on a DIN rail with the optional kit.

IN DAILY USE

Scales with a chassisThe MC-700, MC-1500, MC-1500R and MC-1500R48 chassis power the unit and gather the fiber network at one location.

Prevents packet lossIt applies flow control and back pressure in half-duplex mode.

Fiber type follows the installationSC, SFP and WDM connector options suit single-mode or multi-mode links.

Usage areasFTTH and FTTC networks·FTTB building links·Internet service provider networks·Small office networks

Hardware Specifications
Hardware Version	6
Ports	1 x 10/100/1000BASE-T port: GT-802/GT-802S/GT-802S40/GT-802S60/GT-805A/GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60 1 x 1000BASE-SX SC port: GT-802 1 x 1000BASE-LX SC port: GT-802S/GT-802S40/GT-802S60 1 x 100/1000BASE-X SFP port: GT-805A 1 x 1000BASE-BX SC port: GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60
Copper Interface	RJ-45 port (auto-MDI/MDI-X), twisted pair
Optic Interface	GT-802/GT-802S/GT-802S40/GT-802S60: SC GT-805A: SFP GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60: WDM SC
Fiber Maximum Distance	GT-802: 220/550 m GT-802S: 20 km GT-802S40: 40 km GT-802S60: 60 km GT-805A: N/A GT-806A15: 20 km GT-806B15: 20 km GT-806A40: 40 km GT-806B40: 40 km GT-806A60: 60 km GT-806B60: 60 km
Optic Wavelength	GT-802: 850 nm GT-802S: 1310 nm GT-802S40: 1310 nm GT-802S60: 1310 nm GT-805A: N/A GT-806A15: 　　TX: 1310 nm 　　RX: 1550 nm GT-806B15: 　　TX: 1550 nm 　　RX: 1310 nm GT-806A40: 　　TX: 1310 nm 　　RX: 1550 nm GT-806B40: 　　TX: 1550 nm 　　RX: 1310 nm GT-806A60: 　　TX: 1310 nm 　　RX: 1550 nm GT-806B60: 　　TX: 1550 nm 　　RX: 1310 nm
Max. Optical Launch Power	GT-802: -4 dBm GT-802S: -3 dBm GT-802S40: -3 dBm GT-802S60: -3 dBm GT-805A: N/A GT-806A15: -3 dBm GT-806B15: -3 dBm GT-806A40: +5 dBm GT-806B40: +4 dBm GT-806A60: +5 dBm GT-806B60: +4 dBm
Min. Optical Launch Power	GT-802: -9.5 dBm GT-802S: -9.5 dBm GT-802S40: -9.5 dBm GT-802S60: -9.5 dBm GT-805A: N/A GT-806A15: -9 dBm GT-806B15: -9 dBm GT-806A40: 0 dBm GT-806B40: -1 dBm GT-806A60: 0 dBm GT-806B60: -1 dBm
Max. Input Power	GT-802: N/A GT-802S: -3 GT-802S40: -3 GT-802S60: -3 GT-805A: N/A GT-806A15: -3 GT-806B15: -3 GT-806A40: -2 GT-806B40: -2 GT-806A60: -2 GT-806B60: -2
Min. Input Power	GT-802: -18 GT-802S: -20 GT-802S40: -20 GT-802S60: -20 GT-805A: N/A GT-806A15: -21 GT-806B15: -21 GT-806A40: -25 GT-806B40: -25 GT-806A60: -25 GT-806B60: -25
Optical Link Budget	GT-802: 　　3 dB (62.5/125 µm) 　　4 dB (50/125 µm) GT-802S: 4.9 dB GT-802S40: 4.9 dB GT-802S60: 4.9 dB GT-805A: N/A GT-806A15: 12 dB GT-806B15: 12 dB GT-806A40: 25 dB GT-806B40: 24 dB GT-806A60: 25 dB GT-806B60: 24 dB
LED Indicators	PWR TP LINK/ACT, 1000 LINK/ACT Fiber LINK/ACT
DIP Switch	LFP function (Disable / Enable) setting
Power Consumption	4.6 W / 15 BTU (maximum)
Power Input	5 V DC / 2 A
Dimensions (W × D × H)	94 × 70 × 26 mm
Weight	0.2 kg
Installation	Wall mount and chassis installation DIN-rail installation with optional DIN-rail Kit
Converter Specifications
Speed	Twisted-pair: 　　10/20 Mbps for half/full duplex 　　100/200 Mbps for half/full duplex 　　2000 Mbps for full duplex Fiber-optic: 　　2000 Mbps for full duplex 　　200 Mbps for full duplex (GT-805A only)
Network Cables	Twisted-pair 　　10BASE-T: 2-pair UTP Cat. 3, 4, 5; up to 100 m 　　100BASE-TX: 2-pair UTP Cat. 5; up to 100 m 　　1000BASE-T: 4-pair STP Cat. 5; up to 100 m Fiber-optic Cable 1000BASE-SX: 　　50/125 µm or 62.5/125 µm multi-mode fiber cable; up to 220/550 m/2 km. 1000BASE-LX: 　　9/125 µm single-mode cable, providing long distance for 10/20/40/80/120 km (vary on SFP module) 100BASE-FX: 50/125 µm or 62.5/125 µm multi-mode fiber cable for up to 2 km (vary on SFP module) 9/125 µm single-mode cable for 20/40/60/120 km (vary on SFP module)
Jumbo Packet Size	9 K
Standard Conformance
Standards Compliance	IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX/100BASE-FX IEEE 802.3ab, 1000BASE-T IEEE 802.3z, 1000BASE-SX/LX IEEE 802.3x full-duplex flow control
Environment
Operating Environment	Operating temperature: 0 ~ 50 °C Humidity: 5 ~ 95% non-condensing
Storage Environment	Storage temperature: -10 ~ 70 °C Humidity: 5 ~ 95% non-condensing
Emissions	FCC Class A, CE Class A

Hardware Specifications

Hardware Version

Ports

1 x 10/100/1000BASE-T port:
GT-802/GT-802S/GT-802S40/GT-802S60/GT-805A/GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60

1 x 1000BASE-SX SC port:
GT-802

1 x 1000BASE-LX SC port:
GT-802S/GT-802S40/GT-802S60

1 x 100/1000BASE-X SFP port:
GT-805A

1 x 1000BASE-BX SC port:
GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60

Copper Interface

RJ-45 port (auto-MDI/MDI-X), twisted pair

Optic Interface

GT-802/GT-802S/GT-802S40/GT-802S60: SC
GT-805A: SFP
GT-806A15/GT-806B15/GT-806A40/GT-806B40/GT-806A60/GT-806B60: WDM SC

Fiber Maximum Distance

GT-802: 220/550 m
GT-802S: 20 km
GT-802S40: 40 km
GT-802S60: 60 km
GT-805A: N/A
GT-806A15: 20 km
GT-806B15: 20 km
GT-806A40: 40 km
GT-806B40: 40 km
GT-806A60: 60 km
GT-806B60: 60 km

Optic Wavelength

GT-802: 850 nm
GT-802S: 1310 nm
GT-802S40: 1310 nm
GT-802S60: 1310 nm
GT-805A: N/A
GT-806A15:
　　TX: 1310 nm
　　RX: 1550 nm
GT-806B15:
　　TX: 1550 nm
　　RX: 1310 nm
GT-806A40:
　　TX: 1310 nm
　　RX: 1550 nm
GT-806B40:
　　TX: 1550 nm
　　RX: 1310 nm
GT-806A60:
　　TX: 1310 nm
　　RX: 1550 nm
GT-806B60:
　　TX: 1550 nm
　　RX: 1310 nm

Max. Optical Launch Power

GT-802: -4 dBm
GT-802S: -3 dBm
GT-802S40: -3 dBm
GT-802S60: -3 dBm
GT-805A: N/A
GT-806A15: -3 dBm
GT-806B15: -3 dBm
GT-806A40: +5 dBm
GT-806B40: +4 dBm
GT-806A60: +5 dBm
GT-806B60: +4 dBm

Min. Optical Launch Power

GT-802: -9.5 dBm
GT-802S: -9.5 dBm
GT-802S40: -9.5 dBm
GT-802S60: -9.5 dBm
GT-805A: N/A
GT-806A15: -9 dBm
GT-806B15: -9 dBm
GT-806A40: 0 dBm
GT-806B40: -1 dBm
GT-806A60: 0 dBm
GT-806B60: -1 dBm

Max. Input Power

GT-802: N/A
GT-802S: -3
GT-802S40: -3
GT-802S60: -3
GT-805A: N/A
GT-806A15: -3
GT-806B15: -3
GT-806A40: -2
GT-806B40: -2
GT-806A60: -2
GT-806B60: -2

Min. Input Power

GT-802: -18
GT-802S: -20
GT-802S40: -20
GT-802S60: -20
GT-805A: N/A
GT-806A15: -21
GT-806B15: -21
GT-806A40: -25
GT-806B40: -25
GT-806A60: -25
GT-806B60: -25

Optical Link Budget

GT-802:
　　3 dB (62.5/125 µm)
　　4 dB (50/125 µm)
GT-802S: 4.9 dB
GT-802S40: 4.9 dB
GT-802S60: 4.9 dB
GT-805A: N/A
GT-806A15: 12 dB
GT-806B15: 12 dB
GT-806A40: 25 dB
GT-806B40: 24 dB
GT-806A60: 25 dB
GT-806B60: 24 dB

LED Indicators

PWR
TP LINK/ACT, 1000 LINK/ACT
Fiber LINK/ACT

DIP Switch

LFP function (Disable / Enable) setting

Power Consumption

4.6 W / 15 BTU (maximum)

Power Input

5 V DC / 2 A

Dimensions (W × D × H)

94 × 70 × 26 mm

Weight

0.2 kg

Installation

Wall mount and chassis installation
DIN-rail installation with optional DIN-rail Kit

Converter Specifications

Speed

Twisted-pair:
　　10/20 Mbps for half/full duplex
　　100/200 Mbps for half/full duplex
　　2000 Mbps for full duplex
Fiber-optic:
　　2000 Mbps for full duplex
　　200 Mbps for full duplex (GT-805A only)

Network Cables

Twisted-pair
　　10BASE-T: 2-pair UTP Cat. 3, 4, 5; up to 100 m
　　100BASE-TX: 2-pair UTP Cat. 5; up to 100 m
　　1000BASE-T: 4-pair STP Cat. 5; up to 100 m

Fiber-optic Cable
1000BASE-SX:
　　50/125 µm or 62.5/125 µm multi-mode fiber cable; up to 220/550 m/2 km.
1000BASE-LX:
　　9/125 µm single-mode cable, providing long distance for 10/20/40/80/120 km (vary on SFP module)

100BASE-FX:
50/125 µm or 62.5/125 µm multi-mode fiber cable for up to 2 km (vary on SFP module)
9/125 µm single-mode cable for 20/40/60/120 km (vary on SFP module)

Jumbo Packet Size

9 K

Standard Conformance

Standards Compliance

IEEE 802.3, 10BASE-T
IEEE 802.3u, 100BASE-TX/100BASE-FX
IEEE 802.3ab, 1000BASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3x full-duplex flow control

Environment

Operating Environment

Operating temperature: 0 ~ 50 °C
Humidity: 5 ~ 95% non-condensing

Storage Environment

Storage temperature: -10 ~ 70 °C
Humidity: 5 ~ 95% non-condensing

Emissions

FCC Class A, CE Class A

10/100/1000BASE-T to 1000BASE-SX/LX Gigabit Media Converter

Datasheet

GT-80x Series

Kullanım Kılavuzu

GT-80x Series

GT-80x Series

Similar Products

1-Channel 4-in-1 Video over Gigabit Fiber Bundle Kit

Managed Gigabit Ethernet Media Converter

10/100/1000BASE-T to 1000BASE-SX/LX Smart Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

10/100/1000BASE-T to 1000BASE-SX/LX Gigabit Media Converter

Datasheet

GT-80x Series

Kullanım Kılavuzu

GT-80x Series

GT-80x Series

Similar Products

1-Channel 4-in-1 Video over Gigabit Fiber Bundle Kit

Managed Gigabit Ethernet Media Converter

10/100/1000BASE-T to 1000BASE-SX/LX Smart Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter