Stock Code: RG-S2910-10GT2SFP-P-E
| Hardware Specifications | |
|---|---|
| Ports | 10 10/100/1000BASE-T ports 2 100/1000BASE-X SFP ports (non-combo) Ports 1-8 support PoE/PoE+ |
| Expansion Slots | - |
| Modular Power Slots | - |
| Fan Trays | Fanless |
| Expansion Modules | - |
| Management Ports | 1 console port |
| Switching Capacity | 256Gbps |
| Packet Forwarding Rate | 18Mpps |
| Max. Number of 10GE Ports | - |
| PoE | IEEE802.3af and 802.3at power source standards; Auto/energy-saving (default) power source mode; Hot-swappable and uninterrupted power supply; Port priority; PoE devices support stacking |
| Port Buffer | 1.5MB |
| ARP Table | 500 |
| MAC Address | 16K |
| Routing Table Size (IPv4/IPv6) | 64 (IPv4/IPv6) |
| ACL Entries | Ingress: 750 Egress: - |
| Software Specifications | |
| VLAN | 4K 802.1q VLANs, Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, Private VLAN, Voice VLAN, QinQ, IP subnet-based VLAN, GVRP, Guest VLAN |
| QinQ | Basic QinQ, Flexible QinQ, N:1 VLAN switching, 1:1 VLAN translation |
| Link Aggregation | AP, LACP (max 8 ports aggregatable), Cross-device AP, Flow balance |
| Port Mirroring | One-to-one mirroring, One-to-many mirroring, Flow-based mirroring, Mirroring across devices, VLAN-based mirroring, VLAN filtering mirroring, AP port mirroring, RSPAN, ERSPAN # RG-S2910-10GT2SFP-P-E supports N:1/1:N port mirroring and Flow-based mirroring |
| Spanning Tree Protocols | IEEE802.1d STP, IEEE802.1w RSTP, Standard 802.1s MSTP, Port fast, BPDU filter, BPDU guard, TC guard, TC protection, Root guard |
| DHCP | DHCP server, DHCP client, DHCP snooping, DHCP relay, IPv6 DHCP snooping, IPv6 DHCP client, IPv6 DHCP relay |
| Multiple Spanning Tree Protocol (MSTP) Instances | 64 |
| Maximum Aggregation Port (AP) | 128 |
| SDN | OpenFlow 1.0 & 1.3 |
| VSU (Virtual Switch Unit) | Supported (up to 9 stack members), Local and remote stacking, Inter-chassis link aggregation within stack, Stacking via 10G Ethernet ports # Not supported by RG-S2910-10GT2SFP-P-E |
| SCN (Simplicity Campus Network) | Support building large L2 network with core devices and access resource pool through VSU and VSD. Management required only at core devices, thus simplifying horizontal and vertical network management and maintenance. # Not supported by RG-S2910-10GT2SFP-P-E |
| Zero Configuration | CWMP(TR069) |
| L2 Features | MAC, EEE, ARP, VLAN, Basic QinQ, Flexible QinQ, Link aggregation, Mirroring, STP, RSTP, MSTP, Broadcast/Multicast/Unknown unicast storm control, IGMP v1/v2/v3 snooping, IPv6 MLD Snooping v1/v2, IGMP SGVL/IVGL, IGMP querier, IGMP filter, IGMP fast leave, DHCP, Jumbo frame, RLDP, LLDP, REUP, G.8032 ERPS, Layer 2 protocol tunnel |
| Layer 2 Protocols | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1x, IEEE802.3ab, IEEE802.1Q (GVRP), IEEE802.1d, IEEE802.1w, IEEE802.1s, IGMP snooping v1/v2 |
| Layer 3 Features | IPv4 static routing, RIP, IPv6 static routing, RIPng |
| Layer 3 Protocols (IPv4) | Static routing, RIP |
| IPv4 Features | Ping, Traceroute |
| IPv6 Features | ICMPv6, IPv6 Ping, IPv6 Tracert, Manually configure local address, Automatically create local address |
| Basic IPv6 Protocols | IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping and IPv6 Tracert |
| IPv6 Routing Protocols | Static routing, RIPng |
| G.8032 | Supported |
| ACL | Standard/Extended/Expert ACL, Extended MAC ACL, ACL 80, IPv6 ACL, ACL logging, ACL counter, ACL remark, Global ACL, ACL redirect, Time-based ACL |
| QoS | 802.1p/DSCP/TOS traffic classification; Multiple queuing mechanisms such as SP, WRR, DRR, SP+WFQ, SP+WRR, SP+DRR; Ingress/egress port-based rate limiting; Port-based traffic identification; Each port supports 8 queue priorities; Flow-based rate limiting with minimum 8Kbps granularity |
| IPv6 ACL | Supported |
| Reliability | RIP GR; ERPS (G.8032); REUP dual-link fast switching technology; RLDP (Rapid Link Detection) |
| EEE Format | Support IEEE 802.3az standard |
| Security | Binding of IP address, MAC address and port address; Binding of IPv6, MAC address and port address; Filter invalid MAC addresses; Port-based and MAC-based 802.1x; MAB; Portal and Portal 2.0 authentication; ARP inspection; DAI; Rate limiting of ARP packets; Network gateway anti-ARP spoofing; Broadcast suppression; Hierarchical management by administrators and password protection; RADIUS and TACACS+; Authorization; AAA security authentication for device login management (IPv4/IPv6); SSH and SSH V2.0; BPDU protection; IP source protection; CPP, NFPP; Port protection |
| Manageability | SNMPv2c, CLI (Telnet/Console), Syslog, RMON (1, 2, 3, 9), Web |
| Hot Patch | Supported |
| Smart Temperature Control | Automatic fan speed adjustment; Fan fault alerts; Fan status monitoring # Not supported by RG-S2910-10GT2SFP-P-E (fanless model) |
| Smart Power Source | - |
| Other Protocols | FTP, TFTP, DNS client |
| Physical, Power and Environment | |
| Dimensions (W x D x H) (mm) | 340 × 260 × 44 |
| Rack Height | 1RU |
| Weight | ≤2.5kg |
| MTBF (hours) | >200K |
| Lightning Protection on Power Port | Common Mode 6KV/Differential Mode 6KV |
| Lightning Protection on Communication Port | Common Mode 6KV |
| Power Supply | AC input: Rated voltage range: 100V to 240V AC Maximum voltage range: 90V to 264V AC Frequency: 50/60Hz Rated current: 2A HVDC input: Input voltage range: 192V to 290V DC Input current range: 1.0A to 0.4A |
| Power Consumption | 165W (with 8-port PoE or 4-port PoE+) |
| PoE Power | 125W |
| Safety Standards | IEC 60950-1, EN 60950-1 |
| Emission Standards | EN 300 386, EN 55022/55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11 |
| Temperature | Operating temperature: 0°C to 45°C Storage temperature: -40°C to 70°C |
| Humidity | Operating humidity: 10% to 90%RH Storage humidity: 5% to 95%RH |
| Operating Altitude | -500m to 5,000m |
