Powers a whole camera network from one rack unit over sixteen gigabit PoE ports.

Running every port at gigabit speed, this Layer 2 switch rounds out sixteen PoE ports with two copper and two SFP uplinks. It connects straight to mains voltage and comes up as a plug-and-play install.

16 portsPoE port count

52 GbpsSwitching Capacity

240 WTotal PoE budget

100–240 V ACPower supply

-10 °C ~ 55 °COperating Temperature

8KMAC table size

Key features

240W

Total PoE budget

It draws 7 W when idle and feeds all sixteen ports together at full load.

90W

High power on the red ports

Port 1 and port 2 supply power to the IEEE 802.3bt standard, while the remaining ports deliver 30 W.

52Gbps

Switching capacity

It forwards 29.76 Mpps and holds a 4 Mbit buffer with an 8K MAC table.

16port

Gigabit end to end

16 × RJ45 10/100/1000 Mbps PoE ports run alongside two RJ45 and two SFP uplinks.

100–240V AC

Direct mains supply

It asks for no separate power adapter and takes power straight from the mains.

-10 ~ 55°C

Operating temperature range

It works at 10% to 90% relative humidity.

AT INSTALL TIME

Plug and playIt asks for no configuration interface; the technician plugs the cable in and the switch goes into service.

The red port carries the high loadA camera that needs high power goes on the red port, and standard devices take the remaining ports.

Fits the rackIts 440 mm wide chassis takes a place in a standard cabinet rack.

Technical Specification

Layer

Layer 2

Managed

Switching Capacity

52 Gbps

Packet Forwarding Rate

29.76 Mpps

Packet Buffer Memory

4 Mbit

MAC Table Size

Standards Compliance

IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z

Hardware Feature

Standard Power Supply

Yes

PoE

Yes

Ethernet Port

Optical Port

Ethernet Port Rate

1 Gbps

Optical Port Rate

1 Gbps

Port Configuration

Port 1–16: 16 × RJ45 10/100/1000 Mbps (PoE)
Port 17–18: 2 × RJ45 10/100/1000 Mbps (uplink)
Port 19–20: 2 × SFP 1000 Mbps (uplink)

Power Supply

100V AC – 240V AC

Operating Temperature

–10°C ~ 55°C (14°F ~ 131°F)

Operating Humidity

10% – 90%

Storage Humidity

5% – 95%

Power Consumption

Idling: 7 W
Full load: 240 W

PoE

PoE Standard

IEEE 802.3af, IEEE 802.3at, Hi-PoE, IEEE 802.3bt

PoE Budget

Port 1–2 ≤ 90W, Port 3–16 ≤ 30W, Total ≤ 240W

PoE Pin Assignment

PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-)

General

ESD

Air discharge: 8 kV
Contact discharge: 6 kV

Thunderproof

Common mode: 4 kV
Differential mode: 2 kV

Dimensions (W × D × H)

440 mm × 300 mm × 44 mm (17.32" × 11.81" × 1.73")

Packaging Dimensions (W × D × H)

527 mm × 412 mm × 110 mm (20.75" × 16.22" × 4.33")

Powers a whole camera network from one rack unit over sixteen gigabit PoE ports.

16 portsPoE port count

52 GbpsSwitching Capacity

240 WTotal PoE budget

100–240 V ACPower supply

-10 °C ~ 55 °COperating Temperature

8KMAC table size

Key features

240W

Total PoE budget

It draws 7 W when idle and feeds all sixteen ports together at full load.

90W

High power on the red ports

Port 1 and port 2 supply power to the IEEE 802.3bt standard, while the remaining ports deliver 30 W.

52Gbps

Switching capacity

It forwards 29.76 Mpps and holds a 4 Mbit buffer with an 8K MAC table.

16port

Gigabit end to end

16 × RJ45 10/100/1000 Mbps PoE ports run alongside two RJ45 and two SFP uplinks.

100–240V AC

Direct mains supply

It asks for no separate power adapter and takes power straight from the mains.

-10 ~ 55°C

Operating temperature range

It works at 10% to 90% relative humidity.

AT INSTALL TIME

Plug and playIt asks for no configuration interface; the technician plugs the cable in and the switch goes into service.

The red port carries the high loadA camera that needs high power goes on the red port, and standard devices take the remaining ports.

Fits the rackIts 440 mm wide chassis takes a place in a standard cabinet rack.

Technical Specification

Layer

Layer 2

Managed

Switching Capacity

52 Gbps

Packet Forwarding Rate

29.76 Mpps

Packet Buffer Memory

4 Mbit

MAC Table Size

Standards Compliance

IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3z

Hardware Feature

Standard Power Supply

Yes

PoE

Yes

Ethernet Port

Optical Port

Ethernet Port Rate

1 Gbps

Optical Port Rate

1 Gbps

Port Configuration

Port 1–16: 16 × RJ45 10/100/1000 Mbps (PoE)
Port 17–18: 2 × RJ45 10/100/1000 Mbps (uplink)
Port 19–20: 2 × SFP 1000 Mbps (uplink)

Power Supply

100V AC – 240V AC

Operating Temperature

–10°C ~ 55°C (14°F ~ 131°F)

Operating Humidity

10% – 90%

Storage Humidity

5% – 95%

Power Consumption

Idling: 7 W
Full load: 240 W

PoE

PoE Standard

IEEE 802.3af, IEEE 802.3at, Hi-PoE, IEEE 802.3bt

PoE Budget

Port 1–2 ≤ 90W, Port 3–16 ≤ 30W, Total ≤ 240W

PoE Pin Assignment

PoE/Hi-PoE: 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-)

General

ESD

Air discharge: 8 kV
Contact discharge: 6 kV

Thunderproof

Common mode: 4 kV
Differential mode: 2 kV

Dimensions (W × D × H)

440 mm × 300 mm × 44 mm (17.32" × 11.81" × 1.73")

Packaging Dimensions (W × D × H)

527 mm × 412 mm × 110 mm (20.75" × 16.22" × 4.33")

16-Port 10/100/1000 Mbps Gigabit PoE Switch

Options

Datasheet

PFS3220-16GT-240

A&E Dökümanları

PFS3220-16GT-240

Kullanım Kılavuzu

PFS3220-16GT-240

Teknik Çizim

PFS3220-16GT-240

PFS3220-16GT-240

PFS3220-16GT-240

Fotoğraf

PFS3220-16GT-240

PFS3220-16GT-240

Similar Products

8-Port 10/100/1000T 802.3at PoE+2-Port 10/100/1000T Desktop Switch with LCD PoE Monitor

All-giga PoE Switch

11-Port Switch with 8-Port PoE

3-Port Switch with 2-Port PoE

16-Port 10/100/1000 Mbps Gigabit PoE Switch

Options

Datasheet

PFS3220-16GT-240

A&E Dökümanları

PFS3220-16GT-240

Kullanım Kılavuzu

PFS3220-16GT-240

Teknik Çizim

PFS3220-16GT-240

PFS3220-16GT-240

PFS3220-16GT-240

Fotoğraf

PFS3220-16GT-240

PFS3220-16GT-240

Similar Products

8-Port 10/100/1000T 802.3at PoE+2-Port 10/100/1000T Desktop Switch with LCD PoE Monitor

All-giga PoE Switch

11-Port Switch with 8-Port PoE

3-Port Switch with 2-Port PoE