Hardware Specifications
10/100Mbps Ports	24 10/100BASE-TX MDI/MDI-X RJ45 ports
Gigabit Ports	1 10/100/1000BASE-T MDI/MDI-X RJ45 port
SFP Slot	1 1000BASE-X SFP interface, shared with Gigabit RJ45 copper
PoE Inject Port	24-port with 802.3at PoE injector function (Port-1 to Port-24)
LED Display	System: Power (Green) 10/100BASE-TX RJ45 Interface: LNK/ACT (Green, Port-1 to Port-24) PoE (Amber, Port-1 to Port-24) 10/100/1000BASE-T RJ45 and 1000BASE-X combo Interface: LNK/ACT (Green, Port 25)
DIP Switch	4 operation modes: Standard/QoS/VLAN/Extend
Power Requirements	AC 100~240V, 3A max.
Power Consumption	215 watts, 733 BTU
Dimensions (W × D × H)	440 × 200 × 45 mm
Weight	2612 g
ESD Protection	Contact discharge of ±6KV DC Air discharge of ±8KV DC
Surge Immunity	±4KV
Switching Specifications
Switch Architecture	Store and Forward
MAC Address Table	16K MAC address table with auto learning function
Switch Fabric	6.8Gbps
Switch Throughput	5.06Mpps @64bytes
Maximum Packet Size	16K bytes
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard	IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type	End-span
Power Pin Assignment	1/2 (+), 3/6 (-)
PoE Power Output	Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at) Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
PoE Power Budget	190 watts
Number of PDs, 7 watts	24
Number of PDs, 15 watts	12
Number of PDs, 30 watts	6
Standard Conformance
EMI / Safety	CE, FCC
Standard Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3z Energy Efficient Ethernet
Environment
Operating Temperature	0 ~ 50 degrees C
Storage Temperature	-10 ~ 70 degrees C
Operating Humidity	5 ~ 95%, relative humidity, non-condensing
Storage Humidity	5 ~ 95%, relative humidity, non-condensing

Powers twenty-four cameras from a single rack unit.

This Fast Ethernet PoE+ switch carries power to 802.3at devices from twenty-four ports and extends a link to the monitoring center through a Gigabit uplink port. A DIP switch moves between four operation modes.

24 PortsPoE port count

190 WPoE power budget

30 WPoE power per port

6.8 GbpsSwitching Capacity

16KAddress table

0 ~ 50 °COperating Temperature

Key features

24Port

802.3at PoE+ output

Every port carries up to 30 watts on a 52V DC line.

190W

Total PoE budget

Feeds 24 devices drawing 7 watts, or 6 devices drawing 30 watts.

250m

Extend mode

The first eight ports carry 25-watt PoE at 10 Mbps.

4Modes

DIP switch

Moves between standard, QoS, VLAN and extend operation.

6.8Gbps

Non-blocking switching

Handles 5.06 Mpps with 64-byte packets.

1Port

Gigabit uplink

A copper port or the shared SFP slot extends the link to the monitoring center.

IN DAILY USE

Feeds the camera network from one pointCarries power to twenty-four cameras and gives an uplink to the recording system.

VLAN isolationVLAN mode separates the ports and blocks broadcast storms and DHCP spoofing.

Rack bodyThe 440 x 200 x 45 mm metal case fits a standard rack.

ApplicationsHD IP surveillance systems·SOHO office and department networks·Wireless access points·IP phone systems

Hardware Specifications

10/100Mbps Ports

24 10/100BASE-TX MDI/MDI-X RJ45 ports

Gigabit Ports

1 10/100/1000BASE-T MDI/MDI-X RJ45 port

SFP Slot

1 1000BASE-X SFP interface, shared with Gigabit RJ45 copper

PoE Inject Port

24-port with 802.3at PoE injector function (Port-1 to Port-24)

LED Display

System:
Power (Green)
10/100BASE-TX RJ45 Interface:
LNK/ACT (Green, Port-1 to Port-24)
PoE (Amber, Port-1 to Port-24)
10/100/1000BASE-T RJ45 and 1000BASE-X combo Interface:
LNK/ACT (Green, Port 25)

DIP Switch

4 operation modes:
Standard/QoS/VLAN/Extend

Power Requirements

AC 100~240V, 3A max.

Power Consumption

215 watts, 733 BTU

Dimensions (W × D × H)

440 × 200 × 45 mm

Weight

2612 g

ESD Protection

Contact discharge of ±6KV DC
Air discharge of ±8KV DC

Surge Immunity

±4KV

Switching Specifications

Switch Architecture

Store and Forward

MAC Address Table

16K MAC address table with auto learning function

Switch Fabric

6.8Gbps

Switch Throughput

5.06Mpps @64bytes

Maximum Packet Size

16K bytes

Flow Control

Back pressure for half duplex
IEEE 802.3x pause frame for full duplex

Power over Ethernet

PoE Standard

IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Supply Type

End-span

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Output

Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)

PoE Power Budget

190 watts

Number of PDs, 7 watts

Number of PDs, 15 watts

Number of PDs, 30 watts

Standard Conformance

EMI / Safety

CE, FCC

Standard Compliance

IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3z Energy Efficient Ethernet

Environment

Operating Temperature

0 ~ 50 degrees C

Storage Temperature

-10 ~ 70 degrees C

Operating Humidity

5 ~ 95%, relative humidity, non-condensing

Storage Humidity

5 ~ 95%, relative humidity, non-condensing

24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP Combo Ethernet Switch

Datasheet

FGSW-2511P

Kullanım Kılavuzu

FGSW-2511P

Sertifika

FGSW-2511P

Fotoğraf

FGSW-2511P

Similar Products

8-Port 10/100/1000T 802.3at PoE+2-Port 10/100/1000T Desktop Switch with LCD PoE Monitor

All-giga PoE Switch

11-Port Switch with 8-Port PoE

3-Port Switch with 2-Port PoE

24-Port 10/100BASE-TX 802.3at PoE + 1-Port Gigabit TP/SFP Combo Ethernet Switch

Datasheet

FGSW-2511P

Kullanım Kılavuzu

FGSW-2511P

Sertifika

FGSW-2511P

Fotoğraf

FGSW-2511P

Similar Products

8-Port 10/100/1000T 802.3at PoE+2-Port 10/100/1000T Desktop Switch with LCD PoE Monitor

All-giga PoE Switch

11-Port Switch with 8-Port PoE

3-Port Switch with 2-Port PoE