Powers high-draw camera groups from a single switch and manages them centrally.

A managed Gigabit PoE+ switch for the access layer of SMB and enterprise networks. Each of its 24 copper ports delivers up to 30.8 watts, and the 440-watt total budget covers dense camera deployments. 4 combo TP/SFP ports take on the backbone uplink.

24 ports10/100/1000BASE-T PoE+ ports

440 wattsTotal PoE power budget

30.8 wattsPoE output per port

56 GbpsSwitching Capacity

4 x SFPUplink slots

0 ~ 50 °COperating Temperature

Key features

30.8watts

PoE+ power per port

Powers cameras and access points in the 802.3at class over a single cable.

440watts

Total PoE budget

Delivers 440 watts at 25 °C and 380 watts at 50 °C, powering 24 devices in the 15.4-watt class.

56Gbps

Non-blocking switching

Reaches 41.67 Mpps throughput with 64-byte packets.

4x SFP slots

Fiber uplink

Takes 100/1000BASE-X modules and shares ports 25 through 28.

3smart fans

Thermal management

Sets fan speed by load and cools the 544-watt draw at full load.

8port trunk

Link aggregation

Supports IEEE 802.3ad LACP, builds 8 groups and moves traffic to a backup when a link drops.

IN DAILY USE

PD alive checkWatches the ping response of the connected device and reboots the port when the reply stops.

Weekly PoE scheduleSwitches ports on at set hours and off outside business hours to cut consumption.

Network securityDHCP snooping, IP source guard and ARP inspection filter spoofed packets.

Usage AreasSecurity camera networks·Wireless access points·VoIP phone systems·SMB office networks

Hardware Specifications

Copper Ports

28 x 10/100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports

SFP / mini-GBIC Slots

4 x 100/1000BASE-X SFP interfaces shared with Port 25 to Port 28
Supports 100/1000 Mbps dual mode and DDM

PoE Injector Ports

24 ports with 802.3at/af PoE injector function, Port 1 to Port 24

Console

1 x RS-232-to-RJ-45 serial port (115200, 8, N, 1)

Switch Architecture

Store-and-Forward

Switch Fabric

56 Gbps / non-blocking

Switch Throughput @64 Bytes

41.67 Mpps

MAC Address Table

8K entries

Shared Data Buffer

4.1 megabits

Flow Control

IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

Jumbo Frame

10K bytes

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

LED Indicators

PWR, SYS, LNK/ACT, PoE-in-use, 1000, FAN 1 Alarm, FAN 2 Alarm, PoE PWR Alarm

Power Requirements

100~240V AC, 50/60Hz, auto-sensing

Dimensions (W×D×H)

440 x 300 x 44.5 mm, 1U height

ESD Protection

4 KV DC contact discharge

Enclosure

Metal

Weight

Model	Weight
GS-4210-24P4C	4214 g
GS-4210-24PL4C	4814 g

Power Consumption / Dissipation

Model	Power Consumption
GS-4210-24P4C	275 watts (max.) / 938.3 BTU
GS-4210-24PL4C	544 watts (max.) / 1856.2 BTU

Fan

Model	Fan
GS-4210-24P4C	2 x smart fan
GS-4210-24PL4C	3 x smart fan

Power over Ethernet

PoE Standard

IEEE 802.3af / 802.3at PoE+ PSE

PoE Power Supply Type

End-span

PoE Power Output

Per port 52V DC, max. 30.8 watts

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Budget

Model	PoE Budget
GS-4210-24P4C	220 watts (max.) @ 25°C 190 watts (max.) @ 50°C
GS-4210-24PL4C	440 watts (max.) @ 25°C 380 watts (max.) @ 50°C

PoE Ability PD @ 9 Watts

Model	Number of PD
GS-4210-24P4C	24 units
GS-4210-24PL4C	24 units

PoE Ability PD @ 15.4 Watts

Model	Number of PD
GS-4210-24P4C	14 units
GS-4210-24PL4C	24 units

PoE Ability PD @ 30 Watts

Model	Number of PD
GS-4210-24P4C	7 units
GS-4210-24PL4C	14 units

Layer 2 Functions

Port Mirroring

TX / RX / both
Many-to-1 monitor

VLAN

802.1Q tag-based VLAN
Up to 256 VLAN groups, 4094 VLAN ID range
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (protected port)
GVRP

Link Aggregation (LACP)

IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunk

Spanning Tree Protocol

STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

IGMP Snooping

IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups

MLD Snooping

MLD (v1/v2) snooping, up to 256 multicast groups

Access Control List (ACL)

IPv4/IPv6 IP-based ACL / MAC-based ACL

QoS

8 mapping IDs to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP field in IP packet
Traffic classification based, strict priority and WRR

Security

IEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with the RADIUS server
RADIUS / TACACS+ user access authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP Snooping and DHCP Option 82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard

Management

Basic Management Interfaces

Web browser / Telnet / SNMP v1, v2c
Firmware upgrade by HTTP / TFTP protocol through Ethernet network
Remote / Local Syslog
System log
LLDP protocol
SNTP

Secure Management Interfaces

SSH, SSL, SNMP v3

SNMP MIBs

RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af PoE
IEEE 802.3at PoE+
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2

Environment

Operating

Temperature: 0 ~ 50°C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -20 ~ 70°C
Relative Humidity: 5 ~ 95% (non-condensing)

Powers high-draw camera groups from a single switch and manages them centrally.

24 ports10/100/1000BASE-T PoE+ ports

440 wattsTotal PoE power budget

30.8 wattsPoE output per port

56 GbpsSwitching Capacity

4 x SFPUplink slots

0 ~ 50 °COperating Temperature

Key features

30.8watts

PoE+ power per port

Powers cameras and access points in the 802.3at class over a single cable.

440watts

Total PoE budget

Delivers 440 watts at 25 °C and 380 watts at 50 °C, powering 24 devices in the 15.4-watt class.

56Gbps

Non-blocking switching

Reaches 41.67 Mpps throughput with 64-byte packets.

4x SFP slots

Fiber uplink

Takes 100/1000BASE-X modules and shares ports 25 through 28.

3smart fans

Thermal management

Sets fan speed by load and cools the 544-watt draw at full load.

8port trunk

Link aggregation

Supports IEEE 802.3ad LACP, builds 8 groups and moves traffic to a backup when a link drops.

IN DAILY USE

PD alive checkWatches the ping response of the connected device and reboots the port when the reply stops.

Weekly PoE scheduleSwitches ports on at set hours and off outside business hours to cut consumption.

Network securityDHCP snooping, IP source guard and ARP inspection filter spoofed packets.

Usage AreasSecurity camera networks·Wireless access points·VoIP phone systems·SMB office networks

Hardware Specifications

Copper Ports

28 x 10/100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports

SFP / mini-GBIC Slots

4 x 100/1000BASE-X SFP interfaces shared with Port 25 to Port 28
Supports 100/1000 Mbps dual mode and DDM

PoE Injector Ports

24 ports with 802.3at/af PoE injector function, Port 1 to Port 24

Console

1 x RS-232-to-RJ-45 serial port (115200, 8, N, 1)

Switch Architecture

Store-and-Forward

Switch Fabric

56 Gbps / non-blocking

Switch Throughput @64 Bytes

41.67 Mpps

MAC Address Table

8K entries

Shared Data Buffer

4.1 megabits

Flow Control

IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

Jumbo Frame

10K bytes

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

LED Indicators

PWR, SYS, LNK/ACT, PoE-in-use, 1000, FAN 1 Alarm, FAN 2 Alarm, PoE PWR Alarm

Power Requirements

100~240V AC, 50/60Hz, auto-sensing

Dimensions (W×D×H)

440 x 300 x 44.5 mm, 1U height

ESD Protection

4 KV DC contact discharge

Enclosure

Metal

Weight

Model	Weight
GS-4210-24P4C	4214 g
GS-4210-24PL4C	4814 g

Power Consumption / Dissipation

Model	Power Consumption
GS-4210-24P4C	275 watts (max.) / 938.3 BTU
GS-4210-24PL4C	544 watts (max.) / 1856.2 BTU

Fan

Model	Fan
GS-4210-24P4C	2 x smart fan
GS-4210-24PL4C	3 x smart fan

Power over Ethernet

PoE Standard

IEEE 802.3af / 802.3at PoE+ PSE

PoE Power Supply Type

End-span

PoE Power Output

Per port 52V DC, max. 30.8 watts

Power Pin Assignment

1/2 (+), 3/6 (-)

PoE Power Budget

Model	PoE Budget
GS-4210-24P4C	220 watts (max.) @ 25°C 190 watts (max.) @ 50°C
GS-4210-24PL4C	440 watts (max.) @ 25°C 380 watts (max.) @ 50°C

PoE Ability PD @ 9 Watts

Model	Number of PD
GS-4210-24P4C	24 units
GS-4210-24PL4C	24 units

PoE Ability PD @ 15.4 Watts

Model	Number of PD
GS-4210-24P4C	14 units
GS-4210-24PL4C	24 units

PoE Ability PD @ 30 Watts

Model	Number of PD
GS-4210-24P4C	7 units
GS-4210-24PL4C	14 units

Layer 2 Functions

Port Mirroring

TX / RX / both
Many-to-1 monitor

VLAN

802.1Q tag-based VLAN
Up to 256 VLAN groups, 4094 VLAN ID range
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (protected port)
GVRP

Link Aggregation (LACP)

IEEE 802.3ad LACP and static trunk
Supports 8 groups of 8-port trunk

Spanning Tree Protocol

STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

IGMP Snooping

IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups

MLD Snooping

MLD (v1/v2) snooping, up to 256 multicast groups

Access Control List (ACL)

IPv4/IPv6 IP-based ACL / MAC-based ACL

QoS

8 mapping IDs to 8 level priority queues
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP field in IP packet
Traffic classification based, strict priority and WRR

Security

Management

Basic Management Interfaces

Web browser / Telnet / SNMP v1, v2c
Firmware upgrade by HTTP / TFTP protocol through Ethernet network
Remote / Local Syslog
System log
LLDP protocol
SNTP

Secure Management Interfaces

SSH, SSL, SNMP v3

SNMP MIBs

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE

Standards Compliance

Environment

Operating

Temperature: 0 ~ 50°C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -20 ~ 70°C
Relative Humidity: 5 ~ 95% (non-condensing)

24-Port Managed 802.3at POE+ Gigabit Ethernet Switch + 4-Port Gigabit Combo TP/SFP (440W)

Datasheet

GS-4210-24PL4C

Kullanım Kılavuzu

GS-4210-24PL4C

Hızlı Kurulum Kılavuzu

GS-4210-24PL4C

Sertifika

GS-4210-24PL4C

Similar Products

L2 Gigabit Ethernet Access / Aggregation Switch with 4 10G Uplinks

10 Port L2 Gigabit Ethernet PoE Switch

High-performance 1000M Ethernet Switches

24-Port PoE Gigabit Managed Switch

24-Port Managed 802.3at POE+ Gigabit Ethernet Switch + 4-Port Gigabit Combo TP/SFP (440W)

Datasheet

GS-4210-24PL4C

Kullanım Kılavuzu

GS-4210-24PL4C

Hızlı Kurulum Kılavuzu

GS-4210-24PL4C

Sertifika

GS-4210-24PL4C

Similar Products

L2 Gigabit Ethernet Access / Aggregation Switch with 4 10G Uplinks

10 Port L2 Gigabit Ethernet PoE Switch

High-performance 1000M Ethernet Switches

24-Port PoE Gigabit Managed Switch