Name: 24 ports 10/100/1000Base-T + 4G SFP uplink ports with 24 port PoE 200W
Brand: Edge-Core
SKU: ECS2100-28P

A managed access switch that concentrates 24 PoE ports in one floor cabinet.

This Layer 2 access switch carries 24 10/100/1000BASE-T PoE ports and 4 SFP uplink ports. It distributes a 200 W PoE budget dynamically across the ports. Its 19 inch rack chassis gathers the IP camera and IP telephone load of a floor cabinet into a single device.

24RJ-45 Port Count

4SFP uplink ports

56 GbpsSwitching Capacity

200 WPoE power budget

IEEE 802.3af/atPoE standard

8 KMAC address table

Key features

200W

Total PoE budget

Shares the budget across 24 PoE ports and delivers 15.4 W or 30 W per port.

56Gbps

Switching Capacity

Moves port traffic at a 41.7 Mpps forwarding rate.

4SFP

1G uplink ports

Four SFP ports carry a fiber uplink to the core and build a redundant path.

64MSTP instances

Redundant topology

IEEE 802.1s MSTP cuts loops and brings the backup path into service.

512ACL

Access control entries

Filters traffic by source and destination with L2, L3 and L4 rules.

50°C

Upper operating temperature

Runs in ambient temperatures between 0 and 50 °C.

DAILY USE

One cable per devicePoE ports run a camera, an IP phone or an access point without a separate adapter.

Scheduled powerThe PoE timer sets working hours for device groups and cuts consumption in idle periods.

Recovery on the spotA dual firmware and configuration image starts the switch on the previous release after a failed upgrade.

Usage AreasSMB networks·Enterprise access layer·IP camera and access point power

Hardware Features
IEEE 802.3af/802.3at Standard PoE	The ECS2100 Series PoE switches all support IEEE 802.3af and 802.3at for your VoIP, surveillance, and Wi-Fi APs.
Integrated 4 Gigabit SFP Uplinks	The ECS2100-28P supports 4 integrated Gigabit SFP ports. Besides providing more uplink bandwidth, the SFP ports can be used for redundant links.
Integrated 2 or 4 Gigabit SFP or 2 10G SFP+ Uplinks	The ECS2100-28T/52T switches support 4 integrated Gigabit SFP ports. Besides providing more uplink bandwidth, the SFP ports can be used for redundant links. The ECS2110-26T supports 2 10G SFP+ ports for 10G switch or server connectivity.
200 W PoE Power	The ECS2100 Series offers complete PoE solutions from 65 W to 370 W. The ECS2100-28P delivers a total PoE power budget of 200 W over 24 PoE ports to support IP cameras, IP telephones, or access points. Each port supports IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W).
740 W PoE Power	The ECS2100-28PP can extend PoE power by purchasing accessories. The Power Shelf (PS3000) and External Power Supply (EPS460W) support 24-ports at 30 W to meet 740 W high PoE power demands.
Console Port	The ECS2100 Series includes a console port. All switches support multiple management access through CLI/SNMP/Web/Telnet.
Diag LED	The ECS2100 Series includes a Diag LED to help check the switch status. When the switch boots, it runs a self-check. When the LED is on green, it means the switch operating status is normal.
Software Features
Dual Firmware/Configuration	The ECS2100 Series can save dual firmware/configuration files to provide redundancy and more security for users.
Static Routing	The ECS2100 Series supports L3 static routing to group different network segments and increase user flexibility.
Dynamic VLAN Assignment	Dynamic VLAN Assignment automatically assigns the same port to different VLANs to increase user convenience.
PoE Timer	The PoE Timer can define a PoE power schedule for different customer applications. This saves money and reduces unnecessary waste.
IGMP and MLD Snooping	IGMP/MLD snooping manages multicast streams to ensure high-quality, smooth video.
IEEE 802.3az and Green-Ethernet	The ECS2100 Series supports IEEE 802.3az and Green Ethernet. Using the Energy Efficient Ethernet standard, the switch automatically decreases power usage when network traffic is low.
Dashboard	The ECS2100 Series provides a Dashboard feature that shows the current switch status, such as CPU and memory utilization, events, and traffic status. With this information users can quickly overview and maintain the switch.
Ports and Performance (ECS2100-28P)
RJ-45 10/100/1000 Ports	24
SFP Uplink Ports	4 (1G)
PoE Ports	24
Console Port	1
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Flash Memory	32 MB
DRAM	256 MB
Packet Buffer	4.1 Mbits
MAC Address Table	8 K
Jumbo Frames	10 K
MTBF	681,017 hrs
Power over Ethernet (PoE)
IEEE 802.3af/802.3at	Supported (IEEE 802.3af 15.4 W / IEEE 802.3at 30 W on each port)
PoE Power Budget	200 W
PoE Management	Dynamic Power Allocation; auto disable after exceeding power budget; PoE Timer
Layer 2 Features
Port Support	RJ-45: 10BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3u), 1000BASE-T (IEEE 802.3ab); SFP: IEEE 802.3u (100BASE-FX) and IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers; Digital Diagnostic Monitoring (DDM) on 1G SFP ports
VLAN	4K IEEE 802.1Q VLANs; Port-Based / MAC-Based / IEEE 802.1v (protocol-based) VLAN; Guest VLAN; Auto Voice VLAN; Q-in-Q
Spanning Tree	IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP (64 instances); Loopback Detection; BPDU Filter/Guard, BPDU Forward; Root Guard
Link Aggregation	Static Trunk; IEEE 802.3ad (802.1ax) Link Aggregation Control Protocol (LACP)
Multicast	IGMP v1/v2/v3 snooping; IGMP filtering/throttling; IGMP queries; immediate leave; MLD snooping
Other L2 Features	Flow control (IEEE 802.3x for full-duplex mode, back-pressure for half-duplex mode); LLDP/LLDP-MED; mDNS; IP Clustering (software stacking); Cable Diagnostic; Jumbo Frame 10 K; Green-Saving (IEEE 802.3az / cable length / no link power-saving)
Layer 3 Features
Routing	Static Routing; RIP
IPv6	IPv4/IPv6 dual protocol stack; IPv6 management; IPv6 Ping/Trace, Telnet, Syslog, TFTP; HTTP and SNMP over IPv6
Quality of Service (QoS)
Queues	8 hardware queues per port; WRR / Strict Priority / Hybrid scheduling; Dynamic QoS
Classification	Port-Based QoS; IPv4/IPv6 DSCP; DiffServ; Auto VoIP
Rate Limiting	Ingress/Egress port-based: 64 Kbps ~ 1000 Mbps, 16 Kbps resolution
Security
Access Control List (ACL)	Ingress only; L2/L3/L4; IPv4/IPv6; TCP/UDP-based and MAC-based ACL; 512 ACL entries
Authentication	IEEE 802.1X; MAC Authentication; Web Authentication; Dynamic VLAN Assignment; AAA (RADIUS/TACACS+)
Protection	DDOS Protection; CPU Guard (CPU protection); Port Isolation; Storm Control (broadcast/multicast/unknown); Port Security (port max count per port); MAC Filter; IP Source Guard; Dynamic ARP Inspection; DHCP Snooping
Encryption and Monitoring	SSH v1.5/v2.0; SSL v1/v2/v3 (IPv4/IPv6); Port Mirror (one to one, one to many) and Remote Mirror; sFlow
Management
Management Interfaces	Console, CLI, Web, Telnet, SNMP v1/v2c/v3 (standard and private MIB, SNMP Trap); RMON (groups 1, 2, 3 and 9)
System Management	System password protection; NTP/SNTP; dual image/configuration; configuration and firmware upload/download (HTTP/TFTP/FTP/SFTP); auto firmware upgrade; memory flash log; event/error log and Syslog
DHCP and DNS	DHCP v4/v6 client; DHCP Snooping and Option 82; Dynamic Provision (via Option 66, 67); DHCP Relay v4 (v6); DNS client without DNS proxy
ecCloud Management	Supported
Power
Power Supply	100-240 VAC, 50-60 Hz
Max. System Power Consumption	260 W
Heat Dissipation	887.141 (Btu/H)
Acoustic Noise	46.1 dB (A)
Physical
Form Factor	Rackmount
Rack Space	19"
Dimensions (W × D × H)	44 × 22 × 4.4 cm (17.3 × 8.6 × 1.7 in)
Weight	2.8 kg (6.18 lb)
Environmental
Operating Temperature	0 ~ 50°C
Storage Temperature	-40 ~ 70°C
Altitude	3000 m
Operating Humidity (non-condensing)	10% ~ 90%
Storage Humidity (non-condensing)	10% ~ 90%
Standards Compliance
Safety	CSA (CSA 22.2 NO 60950-1 & UL 60950-1); CB (IEC/EN60950-1)
Electromagnetic Compatibility	CE Mark; FCC Class A
Environmental Regulations	WEEE; RoHS

Hardware Features

IEEE 802.3af/802.3at Standard PoE

The ECS2100 Series PoE switches all support IEEE 802.3af and 802.3at for your VoIP, surveillance, and Wi-Fi APs.

Integrated 4 Gigabit SFP Uplinks

The ECS2100-28P supports 4 integrated Gigabit SFP ports. Besides providing more uplink bandwidth, the SFP ports can be used for redundant links.

Integrated 2 or 4 Gigabit SFP or 2 10G SFP+ Uplinks

The ECS2100-28T/52T switches support 4 integrated Gigabit SFP ports. Besides providing more uplink bandwidth, the SFP ports can be used for redundant links. The ECS2110-26T supports 2 10G SFP+ ports for 10G switch or server connectivity.

200 W PoE Power

The ECS2100 Series offers complete PoE solutions from 65 W to 370 W. The ECS2100-28P delivers a total PoE power budget of 200 W over 24 PoE ports to support IP cameras, IP telephones, or access points. Each port supports IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W).

740 W PoE Power

The ECS2100-28PP can extend PoE power by purchasing accessories. The Power Shelf (PS3000) and External Power Supply (EPS460W) support 24-ports at 30 W to meet 740 W high PoE power demands.

Console Port

The ECS2100 Series includes a console port. All switches support multiple management access through CLI/SNMP/Web/Telnet.

Diag LED

The ECS2100 Series includes a Diag LED to help check the switch status. When the switch boots, it runs a self-check. When the LED is on green, it means the switch operating status is normal.

Software Features

Dual Firmware/Configuration

The ECS2100 Series can save dual firmware/configuration files to provide redundancy and more security for users.

Static Routing

The ECS2100 Series supports L3 static routing to group different network segments and increase user flexibility.

Dynamic VLAN Assignment

Dynamic VLAN Assignment automatically assigns the same port to different VLANs to increase user convenience.

PoE Timer

The PoE Timer can define a PoE power schedule for different customer applications. This saves money and reduces unnecessary waste.

IGMP and MLD Snooping

IGMP/MLD snooping manages multicast streams to ensure high-quality, smooth video.

IEEE 802.3az and Green-Ethernet

The ECS2100 Series supports IEEE 802.3az and Green Ethernet. Using the Energy Efficient Ethernet standard, the switch automatically decreases power usage when network traffic is low.

Dashboard

The ECS2100 Series provides a Dashboard feature that shows the current switch status, such as CPU and memory utilization, events, and traffic status. With this information users can quickly overview and maintain the switch.

Ports and Performance (ECS2100-28P)

RJ-45 10/100/1000 Ports

SFP Uplink Ports

4 (1G)

PoE Ports

Console Port

Switching Capacity

56 Gbps

Forwarding Rate

41.7 Mpps

Flash Memory

32 MB

DRAM

256 MB

Packet Buffer

4.1 Mbits

MAC Address Table

8 K

Jumbo Frames

10 K

MTBF

681,017 hrs

Power over Ethernet (PoE)

IEEE 802.3af/802.3at

Supported (IEEE 802.3af 15.4 W / IEEE 802.3at 30 W on each port)

PoE Power Budget

200 W

PoE Management

Dynamic Power Allocation; auto disable after exceeding power budget; PoE Timer

Layer 2 Features

Port Support

RJ-45: 10BASE-T (IEEE 802.3), 100BASE-TX (IEEE 802.3u), 1000BASE-T (IEEE 802.3ab); SFP: IEEE 802.3u (100BASE-FX) and IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers; Digital Diagnostic Monitoring (DDM) on 1G SFP ports

VLAN

4K IEEE 802.1Q VLANs; Port-Based / MAC-Based / IEEE 802.1v (protocol-based) VLAN; Guest VLAN; Auto Voice VLAN; Q-in-Q

Spanning Tree

IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP (64 instances); Loopback Detection; BPDU Filter/Guard, BPDU Forward; Root Guard

Link Aggregation

Static Trunk; IEEE 802.3ad (802.1ax) Link Aggregation Control Protocol (LACP)

Multicast

IGMP v1/v2/v3 snooping; IGMP filtering/throttling; IGMP queries; immediate leave; MLD snooping

Other L2 Features

Flow control (IEEE 802.3x for full-duplex mode, back-pressure for half-duplex mode); LLDP/LLDP-MED; mDNS; IP Clustering (software stacking); Cable Diagnostic; Jumbo Frame 10 K; Green-Saving (IEEE 802.3az / cable length / no link power-saving)

Layer 3 Features

Routing

Static Routing; RIP

IPv6

IPv4/IPv6 dual protocol stack; IPv6 management; IPv6 Ping/Trace, Telnet, Syslog, TFTP; HTTP and SNMP over IPv6

Quality of Service (QoS)

Queues

8 hardware queues per port; WRR / Strict Priority / Hybrid scheduling; Dynamic QoS

Classification

Port-Based QoS; IPv4/IPv6 DSCP; DiffServ; Auto VoIP

Rate Limiting

Ingress/Egress port-based: 64 Kbps ~ 1000 Mbps, 16 Kbps resolution

Security

Access Control List (ACL)

Ingress only; L2/L3/L4; IPv4/IPv6; TCP/UDP-based and MAC-based ACL; 512 ACL entries

Authentication

IEEE 802.1X; MAC Authentication; Web Authentication; Dynamic VLAN Assignment; AAA (RADIUS/TACACS+)

Protection

DDOS Protection; CPU Guard (CPU protection); Port Isolation; Storm Control (broadcast/multicast/unknown); Port Security (port max count per port); MAC Filter; IP Source Guard; Dynamic ARP Inspection; DHCP Snooping

Encryption and Monitoring

SSH v1.5/v2.0; SSL v1/v2/v3 (IPv4/IPv6); Port Mirror (one to one, one to many) and Remote Mirror; sFlow

Management

Management Interfaces

Console, CLI, Web, Telnet, SNMP v1/v2c/v3 (standard and private MIB, SNMP Trap); RMON (groups 1, 2, 3 and 9)

System Management

System password protection; NTP/SNTP; dual image/configuration; configuration and firmware upload/download (HTTP/TFTP/FTP/SFTP); auto firmware upgrade; memory flash log; event/error log and Syslog

DHCP and DNS

DHCP v4/v6 client; DHCP Snooping and Option 82; Dynamic Provision (via Option 66, 67); DHCP Relay v4 (v6); DNS client without DNS proxy

ecCloud Management

Supported

Power

Power Supply

100-240 VAC, 50-60 Hz

Max. System Power Consumption

260 W

Heat Dissipation

887.141 (Btu/H)

Acoustic Noise

46.1 dB (A)

Physical

Form Factor

Rackmount

Rack Space

19"

Dimensions (W × D × H)

44 × 22 × 4.4 cm (17.3 × 8.6 × 1.7 in)

Weight

2.8 kg (6.18 lb)

Environmental

Operating Temperature

0 ~ 50°C

Storage Temperature

-40 ~ 70°C

Altitude

3000 m

Operating Humidity (non-condensing)

10% ~ 90%

Storage Humidity (non-condensing)

10% ~ 90%

Standards Compliance

Safety

CSA (CSA 22.2 NO 60950-1 & UL 60950-1); CB (IEC/EN60950-1)

Electromagnetic Compatibility

CE Mark; FCC Class A

Environmental Regulations

WEEE; RoHS

24 ports 10/100/1000Base-T + 4G SFP uplink ports with 24 port PoE 200W

Datasheet

ECS2100 Series DS R03.8 (V1.2.2.9)

TR

Notice

ECS2100 Notice (Read Me First)

Firmware

How to upgrade firmware to v1.2.2.9 and release note

ECS2100-V1.2.2.0_upgrade from v1.1.2.0

ECS2100 FW_V1.2.2.9

Kullanım Kılavuzu

ECS2100-28P Quick Start Guide-R01

ECS2100-28P Quick Start Guide-R02 (V1.2.2.0)

ECS2100-28P Installation Guide-R01

ECS2100-28P Web Management Guide-R03 (V1.2.2.9)

ECS2100-28P CLI Reference Guide-R01

ECS2100-28P CLI Reference Guide-R03 (V1.2.2.9)

Sertifika

CE Sertifikası

CE Belgesi

Similar Products

L2 Gigabit Ethernet Access / Aggregation Switch with 4 10G Uplinks

10 Port L2 Gigabit Ethernet PoE Switch

High-performance 1000M Ethernet Switches

24-Port PoE Gigabit Managed Switch