Measures optical power, produces light and reveals faults in the fiber.

The three-in-one optical multimeter brings absolute power measurement, insertion loss testing and visual fault location into a single body. Installation and maintenance teams measure without carrying three separate instruments.

-50 ~ +26 dBmMeasurement range

0.01 dBmResolution

-7 dBmLight source output power

650±10 nmVFL wavelength

-10 ~ +60 °COperating Temperature

210 gWeight

Key features

-50 ~ +26dBm

Wide power measurement span

The InGaAs detector reads power at six calibrated wavelengths between 850 and 1625 nm.

1310 / 1550nm

Built-in light source

The FP-LD source emits at two wavelengths and supports 270 Hz, 1 KHz and 2 KHz modulation.

650±10nm

Visual fault locator

The red laser reveals breaks and tight winding in the fiber and runs in continuous and pulse modes.

15min

Shuts down on its own

The unit powers off when it is left idle and extends battery life.

DAILY USE

Changes the connectorThe FC interface comes as standard, and SC, ST and LC adapters suit different sites.

Sets its own referenceThe user stores a new reference value and reads insertion loss directly.

Carried in the handThe compact body fits a tool bag and works one-handed during field measurement.

Optical Power Meter Module

Detector Type

IngaAs

Measurement Range (dBm)

-50~+26

Uncertainty

Calibrated Wavelengths (nm)

850, 1300, 1310, 1490, 1550, 1625nm

Resolution (dB)

0.01dBm

Identification Frequency Range

10Hz~60KHz

Optical Connector

FC (SC, ST, LC connectors optionally available)

Optical Light Source Module

Emitter Type

FP-LD

Wavelengths

1310/1550 (other wavelengths optionally available)

Output Power (dBm)

-7dBm

Output Stability

±0.05dB/15min; ±0.1dB/8hours

Modulation Frequencies

270Hz, 1KHz, 2KHz

Optical Connector

FC (SC, ST, LC connectors optionally available)

Visual Fault Locator (VFL)

Emitted Power

5mw/ 10mw/ 20mw/ 30mw selectable

Standard Wavelength

650±10nm

Operation Mode

Pulsed (2Hz) and CW

Connector

2.5mm or 1.25mm Universal connector

General Features of Multimeter

Power Source

1.5V*3pcs

Auto-off Time

15min

Operating Temperature (°C)

-10~+60

Storage Temperature (°C)

-25~+70

Dimensions (mm)

160x75x32mm

Weight (g)

210

Measures optical power, produces light and reveals faults in the fiber.

-50 ~ +26 dBmMeasurement range

0.01 dBmResolution

-7 dBmLight source output power

650±10 nmVFL wavelength

-10 ~ +60 °COperating Temperature

210 gWeight

Key features

-50 ~ +26dBm

Wide power measurement span

The InGaAs detector reads power at six calibrated wavelengths between 850 and 1625 nm.

1310 / 1550nm

Built-in light source

The FP-LD source emits at two wavelengths and supports 270 Hz, 1 KHz and 2 KHz modulation.

650±10nm

Visual fault locator

The red laser reveals breaks and tight winding in the fiber and runs in continuous and pulse modes.

15min

Shuts down on its own

The unit powers off when it is left idle and extends battery life.

DAILY USE

Changes the connectorThe FC interface comes as standard, and SC, ST and LC adapters suit different sites.

Sets its own referenceThe user stores a new reference value and reads insertion loss directly.

Carried in the handThe compact body fits a tool bag and works one-handed during field measurement.

Optical Power Meter Module

Detector Type

IngaAs

Measurement Range (dBm)

-50~+26

Uncertainty

Calibrated Wavelengths (nm)

850, 1300, 1310, 1490, 1550, 1625nm

Resolution (dB)

0.01dBm

Identification Frequency Range

10Hz~60KHz

Optical Connector

FC (SC, ST, LC connectors optionally available)

Optical Light Source Module

Emitter Type

FP-LD

Wavelengths

1310/1550 (other wavelengths optionally available)

Output Power (dBm)

-7dBm

Output Stability

±0.05dB/15min; ±0.1dB/8hours

Modulation Frequencies

270Hz, 1KHz, 2KHz

Optical Connector

FC (SC, ST, LC connectors optionally available)

Visual Fault Locator (VFL)

Emitted Power

5mw/ 10mw/ 20mw/ 30mw selectable

Standard Wavelength

650±10nm

Operation Mode

Pulsed (2Hz) and CW

Connector

2.5mm or 1.25mm Universal connector

General Features of Multimeter

Power Source

1.5V*3pcs

Auto-off Time

15min

Operating Temperature (°C)

-10~+60

Storage Temperature (°C)

-25~+70

Dimensions (mm)

160x75x32mm

Weight (g)

210

3 in 1 Optical Multimeter

Similar Products

Handheld Thermal Imager with 256*192 High-Definition

LCD Network Optical Cable Tester Rechargeable Network LineFinder

LCD Digital Network Cable Tester Rechargeable Network Line O4G8

Integrated Mount Tester

3 in 1 Optical Multimeter

Similar Products

Handheld Thermal Imager with 256*192 High-Definition

LCD Network Optical Cable Tester Rechargeable Network LineFinder

LCD Digital Network Cable Tester Rechargeable Network Line O4G8

Integrated Mount Tester